DEV Community

Naresh Maharaj
Naresh Maharaj

Posted on

Aerospike Kubernetes Talking Cluster to Cluster

Hello World

In this article we focus on establishing 2 separate Kubernetes clusters both each hosting the Aerospike low latency database. The goal is to be able to use Aerospike's Cross Data centre Replication tool ( XDR ) to send data from a source cluster to the destination cluster seamlessly. The problem sometimes encountered in exposing a cluster to the outside world is the organisation's security restriction policies. By placing a proxy server in front of the private Kubernetes destination cluster can overcome this problem an achieve the desired goal. To demonstrate the solution we will first start by installing the Kubernetes operator that will schedule our said source and destination databases.

Aerospike Kubernetes Operator

The following Kubernetes nodes have been created using EKS. You can see the following private and public IP addresses from listing the nodes with the kubectl command.



kubectl get nodes -o wide
NAME                             STATUS   ROLES    AGE     VERSION                INTERNAL-IP      EXTERNAL-IP      OS-IMAGE         KERNEL-VERSION                 CONTAINER-RUNTIME
ip-192-168-11-132.ec2.internal   Ready    <none>   2m53s   v1.22.15-eks-fb459a0   192.168.11.132   44.201.67.177    Amazon Linux 2   5.4.219-126.411.amzn2.x86_64   docker://20.10.17
ip-192-168-31-131.ec2.internal   Ready    <none>   2m52s   v1.22.15-eks-fb459a0   192.168.31.131   44.192.83.79     Amazon Linux 2   5.4.219-126.411.amzn2.x86_64   docker://20.10.17
ip-192-168-41-140.ec2.internal   Ready    <none>   2m51s   v1.22.15-eks-fb459a0   192.168.41.140   18.208.222.35    Amazon Linux 2   5.4.219-126.411.amzn2.x86_64   docker://20.10.17
ip-192-168-41-63.ec2.internal    Ready    <none>   2m51s   v1.22.15-eks-fb459a0   192.168.41.63    54.173.138.131   Amazon Linux 2   5.4.219-126.411.amzn2.x86_64   docker://20.10.17
ip-192-168-59-220.ec2.internal   Ready    <none>   2m52s   v1.22.15-eks-fb459a0   192.168.59.220   54.227.122.222   Amazon Linux 2   5.4.219-126.411.amzn2.x86_64   docker://20.10.17
ip-192-168-6-124.ec2.internal    Ready    <none>   2m51s   v1.22.15-eks-fb459a0   192.168.6.124    35.174.60.1      Amazon Linux 2   5.4.219-126.411.amzn2.x86_64   docker://20.10.1


Enter fullscreen mode Exit fullscreen mode

Start by getting a copy of the Aerospike git repo for the k8s operator.



git clone https://github.com/aerospike/aerospike-kubernetes-operator.git
cp features.conf aerospike-kubernetes-operator/config/samples/secrets/.


Enter fullscreen mode Exit fullscreen mode

Install the Aerospike Kubernetes Operator.



cd aerospike-kubernetes-operator/
kubectl apply -f config/samples/storage/eks_ssd_storage_class.yaml
kubectl apply -f config/samples/storage/local_storage_class.yaml
curl -sL https://github.com/operator-framework/operator-lifecycle-manager/releases/download/v0.22.0/install.sh | bash -s v0.22.0
kubectl create -f https://operatorhub.io/install/aerospike-kubernetes-operator.yaml
kubectl get csv -n operators -w
cd..
git clone https://github.com/nareshmaharaj-consultant/kubernetes-anything
cd kubernetes-anything
./createNamespace.sh aerospike
cd ../aerospike-kubernetes-operator/
kubectl -n aerospike create secret generic aerospike-secret --from-file=config/samples/secrets
kubectl -n aerospike create secret generic auth-secret --from-literal=password='admin123'


Enter fullscreen mode Exit fullscreen mode

Install the destination cluster first by using the following configuration



apiVersion: asdb.aerospike.com/v1beta1
kind: AerospikeCluster
metadata:
  name: aerocluster-dest-xdr
  namespace: aerospike

spec:
  size: 1
  image: aerospike/aerospike-server-enterprise:6.1.0.2

  storage:
    filesystemVolumePolicy:
      initMethod: deleteFiles
      cascadeDelete: true
    blockVolumePolicy:
      cascadeDelete: true
    volumes:
      - name: workdir
        aerospike:
          path: /opt/aerospike
        source:
          persistentVolume:
            storageClass: ssd
            volumeMode: Filesystem
            size: 1Gi
      - name: ns
        aerospike:
          path: /opt/aerospike/data/
        source:
          persistentVolume:
            storageClass: ssd
            volumeMode: Filesystem
            size: 1Gi
      - name: aerospike-config-secret
        source:
          secret:
            secretName: aerospike-secret
        aerospike:
          path: /etc/aerospike/secret

  podSpec:
    multiPodPerHost: true

  aerospikeAccessControl:
    roles:
      - name: writer
        privileges:
        - read-write
      - name: reader
        privileges:
        - read
    users:
      - name: admin
        secretName: auth-secret
        roles:
          - sys-admin
          - user-admin
          - read-write
      - name: xdr-writer
        secretName: xdr-user-auth-secret
        roles:
          - writer

  aerospikeConfig:
    service:
      feature-key-file: /etc/aerospike/secret/features.conf
    security: {}
    network:
      service:
        port: 3000
      fabric:
        port: 3001
      heartbeat:
        port: 3002
    namespaces:
      - name: test
        memory-size: 134217728
        replication-factor: 1
        storage-engine:
          type: device
          files:
            - /opt/aerospike/data/test.dat
          filesize: 1073741824
          data-in-memory: true


Enter fullscreen mode Exit fullscreen mode

Create the Aerospike destination

  • database login credentials using k8s secrets
  • schedule the destination single node database cluster.


export secret_auth_name=xdr-user-auth-secret
export password_secret=admin123
kubectl -n aerospike create secret generic $secret_auth_name --from-literal=password=$password_secret
kubectl create -f ssd1_xdr_dest_6.1_cluster_cr.yaml
kubectl -n aerospike get po -w


Enter fullscreen mode Exit fullscreen mode

You should see the database pods successfully running.



kubectl get po -n aerospike -w
NAME                       READY   STATUS     RESTARTS   AGE
aerocluster-dest-xdr-0-0   0/1     Init:0/1   0          13s
aerocluster-dest-xdr-0-0   0/1     Init:0/1   0          18s
aerocluster-dest-xdr-0-0   0/1     PodInitializing   0          19s
aerocluster-dest-xdr-0-0   1/1     Running           0          24s


Enter fullscreen mode Exit fullscreen mode

Next we set up the xdr-proxy. If we look back at the main title image above, you will notice that we are working from the RIGHT hand side to the LEFT hand side in that order. 

Go ahead and create the following xdr-proxy configuration file. Replace the seed address with a FQN DNS name for the destination database pod(s) you created earlier. If you have more than one seed address now is the time to add them to the yaml list.



cd ..
mkdir -p xdr-cfg/etc/auth
cd xdr-cfg/etc/

cat <<EOF> aerospike-xdr-proxy.yml
# Change the configuration for your use case.
# Naresh Maharaj
# Refer to https://www.aerospike.com/docs/connectors/enterprise/xdr-proxy/configuration/index.html
# for details.

# The connector's listening ports, manage service, TLS and network interface.
service:
  port: 8901
  # Aerospike Enterprise Server >= 5.0
  manage:
    address: 0.0.0.0
    port: 8902

# The destination aerospike cluster.
aerospike:
  seeds:
    - aerocluster-dest-xdr-0-0.aerospike.svc.cluster.local:
        port: 3000
  credentials:
    username: admin
    password-file: /etc/aerospike-xdr-proxy/auth/password_DC1.txt
    auth-mode: internal

# The logging config
logging:
  enable-console-logging: true
  file: /var/log/aerospike-xdr-proxy/aerospike-xdr-proxy.log
  levels:
    root: debug
    record-parser: debug
    server: debug
    com.aerospike.connect: debug
  # Ticker log interval in seconds
  ticker-interval: 3600
EOF

sudo tee auth/password_DC1.txt <<EOF
admin123
EOF

kubectl -n aerospike create configmap xdr-proxy-cfg --from-file=etc/
kubectl -n aerospike create secret generic xdr-proxy-auth-secret --from-file=etc/auth


Enter fullscreen mode Exit fullscreen mode

Now that we have our xdr-proxy config file created we can now produce the kubernetes deployment yaml file for the xdr-proxy itself. The following yaml file is used to deploy our xdr-proxy ideally in the same data centre or location where the destination databases will be hosted.



cat <<EOF> xdr-proxy-deployment.yaml
apiVersion: apps/v1
kind: Deployment
metadata:
  name: xdr-proxy
  namespace: aerospike
  labels:
    app: xdr-proxy
spec:
  replicas: 2
  selector:
    matchLabels:
      app: xdr-proxy
  template:
    metadata:
      labels:
        app: xdr-proxy
    spec:
      containers:
      - name: xdr-proxy
        image: aerospike/aerospike-xdr-proxy:2.1.0
        volumeMounts:
        - name: xdr-proxy-dir
          mountPath: "/etc/aerospike-xdr-proxy/"
          readOnly: true
        - name: xdr-auth-dir
          mountPath: "/etc/aerospike-xdr-proxy/auth"
          readOnly: true
        ports:
          - name: xdr-proxy-main
            containerPort: 8901
          - name: xdr-proxy-mng
            containerPort: 8902
      volumes:
      - name: xdr-proxy-dir
        configMap:
          name: xdr-proxy-cfg
          optional: false
      - name: xdr-auth-dir
        secret:
          secretName: xdr-proxy-auth-secret
          optional: false
---
apiVersion: v1
kind: Service
metadata:
  name: xdr-proxy
  namespace: aerospike
spec:
  selector:
    app: xdr-proxy
  ports:
  - name: main
    protocol: TCP
    port: 8901
    targetPort: xdr-proxy-main
  - name: manage
    protocol: TCP
    port: 8902
    targetPort: xdr-proxy-mng
EOF

kubectl create -f xdr-proxy-deployment.yaml
kubectl get po -n aerospike -w


Enter fullscreen mode Exit fullscreen mode

The following shows the current scheduled pods. So far, so good.



kubectl get po -n aerospike -w
NAME                         READY   STATUS    RESTARTS   AGE
aerocluster-dest-xdr-0-0     1/1     Running   0          77m
xdr-proxy-7d9fccd6c8-g5mjt   1/1     Running   0          2m26s
xdr-proxy-7d9fccd6c8-mjxp4   1/1     Running   0          2m26s


Enter fullscreen mode Exit fullscreen mode

Create the source cluster using the following configuration



cd ../aerospike-kubernetes-operator/

cat <<EOF> ssd1_xdr_src_6.1_cluster_cr.yaml
apiVersion: asdb.aerospike.com/v1beta1
kind: AerospikeCluster
metadata:
  name: aerocluster-source-xdr
  namespace: aerospike

spec:
  size: 1
  image: aerospike/aerospike-server-enterprise:6.1.0.2

  storage:
    filesystemVolumePolicy:
      initMethod: deleteFiles
      cascadeDelete: true
    blockVolumePolicy:
      cascadeDelete: true
    volumes:
      - name: workdir
        aerospike:
          path: /opt/aerospike
        source:
          persistentVolume:
            storageClass: ssd
            volumeMode: Filesystem
            size: 1Gi
      - name: ns
        aerospike:
          path: /opt/aerospike/data/
        source:
          persistentVolume:
            storageClass: ssd
            volumeMode: Filesystem
            size: 1Gi
      - name: aerospike-config-secret
        source:
          secret:
            secretName: aerospike-secret
        aerospike:
          path: /etc/aerospike/secret

  podSpec:
    multiPodPerHost: true

  aerospikeAccessControl:
    roles:
      - name: writer
        privileges:
        - read-write
      - name: reader
        privileges:
        - read
    users:
      - name: admin
        secretName: auth-secret
        roles:
          - sys-admin
          - user-admin
          - read-write

  aerospikeConfig:
    service:
      feature-key-file: /etc/aerospike/secret/features.conf
    security: {}
    network:
      service:
        port: 3000
      fabric:
        port: 3001
      heartbeat:
        port: 3002
    xdr:
      dcs:
        - name: DC2
          connector: true
          node-address-ports:
            - xdr-proxy.aerospike.svc.cluster.local 8901
          namespaces:
            - name: test
    namespaces:
      - name: test
        memory-size: 134217728
        replication-factor: 1
        storage-engine:
          type: device
          files:
            - /opt/aerospike/data/test.dat
          filesize: 1073741824
          data-in-memory: true
EOF

kubectl create -f ssd1_xdr_src_6.1_cluster_cr.yaml
kubectl get po -n aerospike -w


Enter fullscreen mode Exit fullscreen mode

From the source cluster, confirm the xdr component has made a connection to the xdr-proxy by filtering the k8s log file as shown in the following kubectl command.



kubectl -n aerospike logs aerocluster-source-xdr-0-0 -c aerospike-server | grep xdr | grep conn
Dec 08 2022 13:49:21 GMT: INFO (xdr): (dc.c:581) DC DC2 connectedOct 10 2022 13:57:53 GMT: INFO (xdr): (dc.c:581) DC DC2 connected


Enter fullscreen mode Exit fullscreen mode

Add some data to the source database and confirm it is being received in the destination cluster. Start by getting the source database service address and connect using the Aerospike's command line tool called aql.



kubectl get svc -n aerospike
NAME                         TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)             AGE
aerocluster-dest-xdr         ClusterIP   None             <none>        3000/TCP            3h38m
aerocluster-dest-xdr-0-0     NodePort    10.100.226.179   <none>        3000:30168/TCP      3h38m
aerocluster-source-xdr       ClusterIP   None             <none>        3000/TCP            33m
aerocluster-source-xdr-0-0   NodePort    10.100.116.173   <none>        3000:31999/TCP      33m
xdr-proxy                    ClusterIP   10.100.44.96     <none>        8901/TCP,8902/TCP   41m


Enter fullscreen mode Exit fullscreen mode


kubectl run -it --rm --restart=Never aerospike-tool -n aerospike --image=aerospike/aerospike-tools:latest -- aql -U admin -P admin123 -h aerocluster-source-xdr-0-0
Insert a source record using the following command in aql
insert into test.a1 (PK,a,b,c,d) values(1,"A","B","C","D")
OK, 1 record affected.

aql> select * from test
+----+-----+-----+-----+-----+
| PK | a   | b   | c   | d   |
+----+-----+-----+-----+-----+
| 1  | "A" | "B" | "C" | "D" |
+----+-----+-----+-----+-----+
1 row in set (0.023 secs)


Enter fullscreen mode Exit fullscreen mode

Connect to the destination cluster in the same way and confirm data has successfully arrived.



kubectl get svc -n aerospike
NAME                         TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)             AGE
aerocluster-dest-xdr         ClusterIP   None             <none>        3000/TCP            3h38m
aerocluster-dest-xdr-0-0     NodePort    10.100.226.179   <none>        3000:30168/TCP      3h38m
aerocluster-source-xdr       ClusterIP   None             <none>        3000/TCP            33m
aerocluster-source-xdr-0-0   NodePort    10.100.116.173   <none>        3000:31999/TCP      33m
xdr-proxy                    ClusterIP   10.100.44.96     <none>        8901/TCP,8902/TCP   41m


Enter fullscreen mode Exit fullscreen mode


kubectl run -it --rm --restart=Never aerospike-tool -n aerospike --image=aerospike/aerospike-tools:latest -- aql -U admin -P admin123 -h aerocluster-dest-xdr-0-0
Run the following select query in the destination cluster.
aql> select * from test
+----+-----+-----+-----+-----+
| PK | a   | b   | c   | d   |
+----+-----+-----+-----+-----+
| 1  | "A" | "B" | "C" | "D" |
+----+-----+-----+-----+-----+
1 row in set (0.031 secs)

OK


Enter fullscreen mode Exit fullscreen mode

Interim summary: So far, at this point it's confirmed that xdr-proxy is doing exactly what we need it to do.

If you now review the logs for the initial 2 xdr-proxies that were scheduled you should indeed see userKey=1.



kubectl logs xdr-proxy-7d9fccd6c8-5q7gn -n aerospike | grep record-parser
2022-12-08 14:53:50.607 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=a1, digest=[120, 48, -23, -90, 110, 126, 84, -1, 114, -116, -9, -21, 28, 75, 126, -68, -51, 83, 31, -117], userKey=1, lastUpdateTimeMs=1670511230565, userKeyString=1, digestString='eDDppm5+VP9yjPfrHEt+vM1TH4s=')

kubectl logs xdr-proxy-7d9fccd6c8-f5zkt -n aerospike | grep record-parser
(none)


Enter fullscreen mode Exit fullscreen mode

Scale up the xdr-proxy to 6 pods.



apiVersion: apps/v1
kind: Deployment
metadata:
  name: xdr-proxy
  namespace: aerospike
  labels:
    app: xdr-proxy
spec:
  replicas: 6
  selector:
    matchLabels:
      app: xdr-proxy
...
kubectl apply -f xdr-proxy-deployment.yaml


Enter fullscreen mode Exit fullscreen mode

We should now have 6 instances of the xdr-proxies running.



kubectl get po -n aerospike -w
NAME                         READY   STATUS    RESTARTS   AGE
aerocluster-dest-xdr-0-0     1/1     Running   0          3h50m
aerocluster-source-xdr-0-0   1/1     Running   0          75m
xdr-proxy-7d9fccd6c8-49ttl   1/1     Running   0          7s
xdr-proxy-7d9fccd6c8-5q7gn   1/1     Running   0          83m
xdr-proxy-7d9fccd6c8-c4j7k   1/1     Running   0          7s
xdr-proxy-7d9fccd6c8-f5zkt   1/1     Running   0          83m
xdr-proxy-7d9fccd6c8-lscbg   1/1     Running   0          7s
xdr-proxy-7d9fccd6c8-r56vs   1/1     Running   0          7s


Enter fullscreen mode Exit fullscreen mode

Lets add some sample messages from our source xdr cluster with primary keys 5,6,7



aql> insert into test (PK,a,b) values (5,"A","B")
OK, 1 record affected.
aql> insert into test (PK,a,b) values (6,"A","B")
OK, 1 record affected.
aql> insert into test (PK,a,b) values (7,"A","B")
OK, 1 record affected.


Enter fullscreen mode Exit fullscreen mode

Notice how we have userKey=5, userKey=6 and userKey=7 across the new scaled xdr-proxies.



kubectl logs xdr-proxy-7d9fccd6c8-5q7gn -n aerospike | grep record-parser
2022-12-08 14:53:50.607 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=a1, digest=[120, 48, -23, -90, 110, 126, 84, -1, 114, -116, -9, -21, 28, 75, 126, -68, -51, 83, 31, -117], userKey=1, lastUpdateTimeMs=1670511230565, userKeyString=1, digestString='eDDppm5+VP9yjPfrHEt+vM1TH4s=')

kubectl logs xdr-proxy-7d9fccd6c8-f5zkt -n aerospike | grep record-parser
(none)

kubectl logs xdr-proxy-7d9fccd6c8-49ttl -n aerospike | grep record-parser
(none)

kubectl logs xdr-proxy-7d9fccd6c8-c4j7k -n aerospike | grep record-parser
2022-12-08 15:05:37.511 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=null, digest=[-88, 104, 104, -114, 19, -44, -19, 29, -15, 18, 118, 72, -117, -106, -28, 21, -48, 50, 26, 113], userKey=7, lastUpdateTimeMs=1670511937250, userKeyString=7, digestString='qGhojhPU7R3xEnZIi5bkFdAyGnE=')

kubectl logs xdr-proxy-7d9fccd6c8-lscbg -n aerospike | grep record-parser
2022-12-08 15:05:27.548 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=null, digest=[68, 4, -94, -44, -75, 112, -102, 73, -120, 41, -101, -120, 33, -111, 15, -114, -85, 46, -2, 80], userKey=5, lastUpdateTimeMs=1670511927465, userKeyString=5, digestString='RASi1LVwmkmIKZuIIZEPjqsu/lA=')
2022-12-08 15:05:32.300 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=null, digest=[33, -100, 127, 120, 17, 45, -79, 115, -40, 53, -70, -57, 120, 73, 20, -50, -99, -98, -104, 85], userKey=6, lastUpdateTimeMs=1670511932288, userKeyString=6, digestString='IZx/eBEtsXPYNbrHeEkUzp2emFU=')

kubectl logs xdr-proxy-7d9fccd6c8-r56vs -n aerospike | grep record-parser
(none)


Enter fullscreen mode Exit fullscreen mode

However, one should be aware that when data is actively flowing between source and destination clusters, there is no reset on the source connections, so the newly scaled xdr-proxies will not be utilised.

We can go ahead and prove this out. Lets try adding some data using the Aerospike's benchmark tool which will ingest data into the source cluster. At the same time we will scale the xdr-proxies on the destination side and see the result. Before we start however, it might be prudent to first scale down the xdr-proxy servers to 1 so there is no possibility of misconstrued results.

I am going to use my own local machine which has the benchmark tool already installed to send data to the source ec2 instances. In order to do this we need to get the external IP address of the service.



kubectl get AerospikeCluster aerocluster-source-xdr -n aerospike  -o yaml

...
pods:
    aerocluster-source-xdr-0-0:
      aerospike:
        accessEndpoints:
        - 192.168.41.63:31999
        alternateAccessEndpoints:
        - 54.173.138.131:31999
        clusterName: aerocluster-source-xdr
        nodeID: 0a0
        tlsAccessEndpoints: []
        tlsAlternateAccessEndpoints: []
        tlsName: ""
      aerospikeConfigHash: 4aacb9809beaa01d99a9f00293c9f7dc141845f8
      hostExternalIP: 54.173.138.131
      hostInternalIP: 192.168.41.63
      image: aerospike/aerospike-server-enterprise:6.1.0.2
      initializedVolumes:
      - workdir
      - ns
      networkPolicyHash: acbbfab3668e1fceeed201139d1173f00095667e
      podIP: 192.168.50.203
      podPort: 3000
      podSpecHash: 972dc2a779fe9ab407212b547d54d3a72ecef259
      servicePort: 31999
...


Enter fullscreen mode Exit fullscreen mode

Add the AWS firewall rule to allow traffic into the k8s service. Connect the asbenchmark tool to start writing traffic using the public IP address for the NodePort Service.



asbenchmark -h 54.173.138.131:31999 -Uadmin -Padmin123 -z 10 -servicesAlternate -w RU,0 -o B256


Enter fullscreen mode Exit fullscreen mode

Scale up the xdr-proxy servers from 1 to 2 and check the logs of both proxies to see what messages are being received. In a production environment you should disable the logging.

Notice how the new xdr-proxy instance xdr-proxy-7d9fccd6c8-s2tzt has no data passed through it.



kubectl -n aerospike logs xdr-proxy-7d9fccd6c8-s2tzt | grep record-parser
(none)

kubectl -n aerospike logs xdr-proxy-7d9fccd6c8-5q7gn | grep record-parser
...
2022-12-08 18:21:36.158 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=testset, digest=[51, -120, 114, -17, -44, 72, 123, 125, 50, 92, 3, 110, -21, -38, 74, 25, 42, 35, 117, 72], userKey=null, lastUpdateTimeMs=1670523696059, userKeyString=null, digestString='M4hy79RIe30yXANu69pKGSojdUg=')
2022-12-08 18:21:36.158 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=testset, digest=[124, -6, -70, -23, 44, 41, -19, 40, -11, -16, 126, 120, 81, -113, -112, -79, 66, 77, -99, -6], userKey=null, lastUpdateTimeMs=1670523696059, userKeyString=null, digestString='fPq66Swp7Sj18H54UY+QsUJNnfo=')
2022-12-08 18:21:36.158 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=testset, digest=[-127, -118, 63, -32, -74, 60, -60, 86, 31, -119, -1, -105, -108, -59, 111, 48, -34, -61, -108, -5], userKey=null, lastUpdateTimeMs=1670523696105, userKeyString=null, digestString='gYo/4LY8xFYfif+XlMVvMN7DlPs=')
2022-12-08 18:21:36.256 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=testset, digest=[99, 1, 80, 2, 76, -43, 125, 77, 47, 8, 6, 35, 49, 117, -35, 54, 120, -29, 118, -72], userKey=null, lastUpdateTimeMs=1670523696178, userKeyString=null, digestString='YwFQAkzVfU0vCAYjMXXdNnjjdrg=')
2022-12-08 18:21:36.257 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=testset, digest=[-88, -46, -48, -33, 77, -120, 123, -101, -70, -20, -96, -104, -51, -90, 28, -15, 70, 11, 118, 83], userKey=null, lastUpdateTimeMs=1670523696202, userKeyString=null, digestString='qNLQ302Ie5u67KCYzaYc8UYLdlM=')
2022-12-08 18:21:36.257 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=testset, digest=[-97, 18, 28, -43, 75, 42, -22, -126, -61, -108, -36, 118, -86, -105, -52, 119, -39, -33, -127, -76], userKey=null, lastUpdateTimeMs=1670523696175, userKeyString=null, digestString='nxIc1Usq6oLDlNx2qpfMd9nfgbQ=')
2022-12-08 18:21:36.257 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=testset, digest=[-120, 103, -51, 57, -71, -106, 13, -48, 100, 28, 59, -3, -39, -56, -67, -103, 29, 36, 75, 119], userKey=null, lastUpdateTimeMs=1670523696191, userKeyString=null, digestString='iGfNObmWDdBkHDv92ci9mR0kS3c=')
2022-12-08 18:21:36.257 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=testset, digest=[-47, 88, -13, 13, -35, 77, 24, 22, -40, -61, -118, -115, 82, 13, 127, -125, 53, 66, -22, -8], userKey=null, lastUpdateTimeMs=1670523696233, userKeyString=null, digestString='0VjzDd1NGBbYw4qNUg1/gzVC6vg=')
2022-12-08 18:21:36.258 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=testset, digest=[-63, -11, 93, -90, 47, 29, -63, 36, 12, 53, -86, 84, 57, -125, 16, 43, -18, 93, 56, 9], userKey=null, lastUpdateTimeMs=1670523696186, userKeyString=null, digestString='wfVdpi8dwSQMNapUOYMQK+5dOAk=')
2022-12-08 18:21:36.258 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=testset, digest=[-23, 101, -114, -87, -52, 107, 36, 113, 101, 33, -16, 82, -95, 97, 34, -121, 82, -97, 40, 59], userKey=null, lastUpdateTimeMs=1670523696145, userKeyString=null, digestString='6WWOqcxrJHFlIfBSoWEih1KfKDs=')
2022-12-08 18:21:36.258 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=testset, digest=[-77, -118, 49, 4, -75, 123, 81, 2, -103, -73, 42, -70, -54, 95, 98, 23, 73, 66, -86, 7], userKey=null, lastUpdateTimeMs=1670523696230, userKeyString=null, digestString='s4oxBLV7UQKZtyq6yl9iF0lCqgc=')
2022-12-08 18:21:36.258 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=testset, digest=[50, -38, -31, -54, -122, -113, -38, 88, 15, 7, 96, 51, -92, -25, 60, -104, 26, 113, -117, -82], userKey=null, lastUpdateTimeMs=1670523696157, userKeyString=null, digestString='MtrhyoaP2lgPB2AzpOc8mBpxi64=')
2022-12-08 18:21:36.258 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=testset, digest=[-77, 31, 67, -18, -52, -114, 42, -18, 36, -111, 89, 62, 109, 114, -54, 54, -121, -110, -88, -108], userKey=null, lastUpdateTimeMs=1670523696206, userKeyString=null, digestString='sx9D7syOKu4kkVk+bXLKNoeSqJQ=')
2022-12-08 18:21:36.258 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=testset, digest=[73, 11, 98, -50, 32, 12, 0, -50, 22, -101, -108, 18, 38, 7, -65, 6, -58, 60, -6, -33], userKey=null, lastUpdateTimeMs=1670523696171, userKeyString=null, digestString='SQtiziAMAM4Wm5QSJge/BsY8+t8=')
2022-12-08 18:21:36.258 GMT DEBUG record-parser - parsed message fields: key=Key(namespace='test', set=testset, digest=[109, -82, 24, 53, 35, 89, -72, -117, -22, 79, 119, -89, 56, -5, 0, -103, -54, 51, 25, 126], userKey=null, lastUpdateTimeMs=1670523696146, userKeyString=null, digestString='ba4YNSNZuIvqT3enOPsAmcozGX4=')
...

Enter fullscreen mode Exit fullscreen mode




Conclusion

Aerospike renowned for its core resiliency has an industry established uptime of 5 x 9s - that's basically ( 0.99999 ). So adding to the data resiliency matrix, XDR now means its possible to have an additional copy of the data distributed asynchronously from one data-centre to another with minimal effort. Taking this one step further, we have shown how this can be achieved using the xdr-proxy to access k8s clusters in a private network. All this has been achieved with minimum effort thanks to the Aerospike Kubernetes Operator.

Top comments (0)