Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. immobiliser for the CAN bus. It's discrete, doesn't employ LED indications or key fobs and is concealed in the vehicle's wiring.
It also permits the user to turn off the system temporarily through Transport Mode to use it when they are renting out their vehicle. This guide will take you through the process of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle against key cloning, hacking and relay attacks. The system connects directly to your car's ECU and is protected by a unique PIN code that you can choose. It is inaccessible to thieves using diagnostic scanners and other modern methods. It is not able to be disabled using circuit cuts.
The system is simple to use, but professional installation is recommended to ensure a clean connection to the ECU of your vehicle. Installers certified by Thatcham can assist with the installation and programing of your Ghost system. They can also suggest a tracking or alarm system to complete the protection package for your vehicle.
The first step is to disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. After that the installer is able to safely begin work. Basic hand tools are helpful to make precise connections and a multimeter can be used to check electrical values and ensure safety. Insulation tape and cable tie are crucial to ensure connections are secure and keep wiring neat. The user's manual offers specific instructions tailored to the Ghost Immobiliser model you have.
During the installation process, it's crucial to select a grounding point that's free of paint and debris. Installers must also ensure that the immobiliser's wires CAN H and can L are connected to the proper ECU ports. These wires can be connected or soldered based on the model. A top-quality connector is recommended to ensure a durable and reliable connection.
Once the installation is complete, the customer can activate the Transport Mode. This allows the vehicle to be utilized by valet parking companies or mechanics without needing to know the pin code. The customer has to press the service icon on the dashboard five times over 2 seconds. After this is done the system will confirm with 5 indication signals.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA verified and Thatcham approved. It's a great choice for those who rent their vehicles often on platforms like Turo. An immobiliser can reduce insurance rates, as it lowers the chance of theft.
Getting Started
You can't go far wrong with an autowatch ignition device in order to guard your vehicle from theft. The device stops your car from starting even if someone steals or copies your key. This is due to its high-tech technology, which is designed to prevent the car's engine from starting without the correct PIN code is entered.
The device is connected to the vehicle's bus network CAN which allows direct communication with the ECU. It uses the buttons on your steering wheel and dashboard to create a unique sequence, which only you know. This makes it impossible for anyone else to start your car. This is the most secure way to safeguard your pride and joy. It will ensure that your car's value remains intact should you ever decide to sell it.
Installing a ghost immobiliser can be an easy process, however, it's important to follow the steps carefully to avoid issues with electricity and system malfunctions. First, you must find and locate a permanent 12V power source and a good grounding point on the vehicle's chassis. After that, you can begin connecting the wires that will be used to activate the immobiliser. Be sure to use high-quality connectors and soldering methods to ensure a solid connection. Also, be sure to insulate the connections with heat shrink tubing or insulation tape to protect them from short circuits in electrical power and other problems.
After the wires are connected, you can plug in the battery and start the engine to determine whether the immobiliser is functioning. After you've confirmed that everything is working properly, you can install the immobiliser in a safe place inside the vehicle. Be sure to cover it well to prevent thieves from getting into it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it is a high-quality deterrent to car thieves. It is a superior defense against key cloning, hacking and relay attacks, and it can't be disabled without knowing the code. The device is simple to use and can be set into a service valet setting so that your vehicle will not be activated if you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is designed to prevent vehicle theft. It connects directly to your vehicle's CAN bus network and communicates with the ECU, making it a virtually undetectable addition to your vehicle. Unlike other aftermarket systems that require the removal of circuit components The Ghost Immobiliser does not interfere with the factory settings for your vehicle.
The system is also unnoticeable by thieves using diagnostic scanning tools. This is due to the fact that it doesn't send and receive radio frequency signals, and it utilizes CAN data to communicate with your ECU. It doesn't require any modifications to your existing key fobs.
Enter your disarm sequence (either two or one buttons) and then switch on the ignition of your car to activate the Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. After that, you are able to start your vehicle and leave safely.
Once installed The Ghost Immobiliser can safeguard your vehicle from key cloning and hacking while preserving the value of your pride and joy. In Transport Mode, you can temporarily disable the Ghost Immobiliser when you need to give your car over for service or valet parking.
You'll require a continuous power source (12V) in addition to a grounding source to complete the installation of a Ghost immobiliser. Ensure that these are both well-insulated and safe to touch. Cable ties are also recommended to secure the wires. This reduces the risk of theft by thieves. To avoid mistakes, make sure to double-check these points and mark them with labels or tape. It's important to check every connection for signs of wear and tear. Be sure to ensure that all connections are firmly in place, and are properly protected. Also, don't forget test the Ghost Immobiliser after the installation is complete. This will make sure that the unit is operating properly, and that all connections are safe and well-insulated. Be sure to fix any issues immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that integrates seamlessly into your vehicle's ECU to stop the engine from starting without authorization. Its cutting-edge technology safeguards your vehicle from key cloning, hacking, and other common tactics that thieves employ to steal vehicles. The Ghost is also able to work in conjunction with existing alarm and tracking systems to offer the ultimate vehicle protection. The Ghost's unparalleled features and subtle design make it a popular choice for car lovers and security-conscious drivers alike.
It is essential to follow the procedures for installation to ensure a complete integration of the Ghost Immobiliser. The best way to begin is to consult the wiring diagram of your vehicle that serves as a guideline to locate and connecting the necessary wires. Then, you'll need to identify the power source as well as grounding points. Once you've identified these then you'll be required to mark them so that they're easily identifiable when installing. It is essential to use top-quality materials and tools. Basic hand tools can help with making precise connections while a multimeter can confirm electrical values and guarantee security. Insulation tape and cable tie ensure that all connections are neat. Finally, a user manual will provide specific guidance specifically tailored to your Ghost model.
It is essential to test the system prior to installing it. Enter the PIN code into the system and start the vehicle. This step will confirm the immobiliser works as intended and will stop vehicle starts that are not authorized. This step should be performed frequently as part of your regular vehicle inspections in order to ensure that the system is working properly.
After the installation is completed, you can drive your vehicle with confidence. The Ghost will guard your pride and joy from potential car thieves. local ghost installer will ensure that no one will take your car away without having the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that detects any attempts to steal or tamper with. This will allow you to locate your car if it's stolen.
The Ghost is compatible with a wide variety of vehicles, including those made by all major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this innovative device. Contact us today to find out more about our services and installation options. We are a TASSA registered installer, a certificate that guarantees we follow strict standards for installing our products. This assures customers, insurance companies, and law enforcement agencies that installations are performed safely and in a safe manner.
ghost immobiliser
Top comments (0)