FANUC A61L-0001-0086 Color CRT to LCD Complete Guide

FANUC A61L-0001-0086 Color CRT to LCD Complete Guide
FANUC A61L-0001-0086 LCD Display Replacement —Published: 2026-05-03 | FANUC CNC Display Solutions

Key Specifications
Model: A61L-0001-0086
Type: Color CRT to LCD retrofit kit
Display Size: 14-inch (matches original CRT)
Interface: HONDA 20-pin signal connector
Power: DC 24V (compatible with original CRT power supply)
Compatibility: FANUC 0i/16i/18i series CNC systems
Brightness: 400 cd/m2 (higher than original CRT)
Lifespan: 50,000+ hours (vs. 15-20 years for CRT)
Why Complete Retrofit?
Color CRT displays have a typical lifespan of 15-20 years. As they age, you may experience:

Color accuracy degradation (reds appear orange, blues appear purple)
Reduced brightness and contrast (harder to read in bright workshops)
Flickering or image distortion
Complete failure due to cathode ray tube wear
Difficulty obtaining replacement parts (discontinued by manufacturer)
Our complete retrofit kit solves these problems by providing stable, vibrant colors with a lifespan of 50,000+ hours. The A61L-0001-0086 kit maintains 100% compatibility with your existing CNC system while delivering superior image quality.

A61L-0001-0086 LCD Upgrade Module Back Interface
LCD module back interface — 20-pin HONDA signal port, plug-and-play compatible

Complete Installation Guide
Step 1: Safety Preparation
Power down the CNC system and disconnect the main power supply. Wait 5 minutes for capacitors to discharge completely. Verify no voltage present before proceeding. Always wear an anti-static wrist strap when handling electronic components.

Step 2: Remove Existing CRT
Carefully disconnect the HONDA 20-pin signal cable and power connector from the back of the CRT. Remove the mounting screws (typically 4-6 screws) and gently slide the CRT unit out of the control cabinet. Be careful not to damage the CRT glass.

Step 3: Prepare Retrofit Kit
Unpack the A61L-0001-0086 retrofit kit and verify all components are present: LCD panel, mounting brackets, cables, power adapter (if needed), and installation manual. Check the LCD panel for any shipping damage. Confirm the HONDA 20-pin connector is intact.

Step 4: Install LCD Panel
Position the color LCD panel using the same mounting points as the original CRT. The A61L-0001-0086 is designed with identical dimensions - it's a direct drop-in replacement requiring no modifications to the cabinet or mounting holes.

Step 5: Connect Cables
Connect the HONDA 20-pin signal cable to the LCD interface. Connect the DC 24V power cable to the original power supply connector. Ensure all connections are secure and properly seated. The LCD kit is designed to work with the original power supply - no additional power adapters needed.

Step 6: Test and Verify
Restore power and boot the CNC system. Verify the display shows clear, stable, vibrant colors. Check all display functions including:

Text display clarity and color accuracy
Graphics and tool path display
Alarm messages and diagnostics (should display in correct colors)
Menu navigation and parameter settings
Backlight uniformity across the entire screen
A61L-0001-0086 LCD Upgrade Effect
A61L-0001-0086 LCD upgrade — clear, bright, no flicker on FANUC system
Key Advantages
Direct Replacement: Same mounting dimensions as original 14-inch CRT - no drilling or modifications required
100% Compatible: HONDA 20-pin interface matches original CRT specification
Superior Color: 256-color TFT LCD with LED backlight provides vibrant, accurate colors
Industrial Grade: Designed for 24/7 operation in harsh industrial environments (dust, vibration, temperature fluctuations)
Long Lifespan: LCD technology rated for 50,000+ hours (equivalent to 15+ years of normal use)
Energy Efficient: Consumes 60% less power than CRT (reduced heat generation)
Warranty: 2-year warranty included
Professional Tips
Take photos of the original wiring before disconnecting for reference
Label all cables during removal to ensure correct reconnection
Test the display for at least 30 minutes before closing the cabinet
Keep the original CRT as a spare or for future reference
Clean the LCD screen with isopropyl alcohol and lint-free cloth only
Adjust color settings after installation for optimal display quality
Technical Support
For professional installation support or technical inquiries, contact us:

Email: [e-mail]

Phone: [phone]

Address: Shenzhen, China

Business Hours: Monday-Friday 9:00-18:00 (GMT+8)

FANUC A61L-0001-0086 CRT to LCD Upgrade Specifications
Parameter Original CRT Monitor Kongto LCD Replacement
Display Type Color CRT TFT LCD
Resolution 640×480 800×600
Signal Format RGB (TTL) VGA/RGBHV
Power Supply +12V DC +12V DC
Interface Proprietary FANUC DB15 VGA + Adapter Cable
Mounting Panel mount Direct replacement
MTBF > 10,000h > 30,000 h
🔧 Ready to upgrade? View our Fanuc A61L 0001 0086 solution