Product Overview
The FANUC A61L-0001-0095 is a 9-inch color CRT display originally used in FANUC CNC systems. As these CRT displays age, they suffer from brightness loss, flickering, and eventual failure. Our LCD replacement kit provides a cost-effective, reliable solution with modern LCD technology while maintaining 100% compatibility.
Key Specifications
Model: A61L-0001-0095
Type: 8-inch TFT-LCD (replaces 9-inch color CRT)
Display: Color
Interface: HONDA 20-pin signal connector
Power: DC 24V (compatible with original CRT power supply)
Compatibility: FANUC 0i/16i/18i series CNC systems
Mounting: Identical to original CRT dimensions
Why Replace Your CRT?
Color CRT displays have a typical lifespan of 15-20 years. Common issues include:
Reduced brightness and contrast (harder to read in bright workshops)
Flickering or image distortion
Complete failure due to cathode ray tube wear
Difficulty obtaining replacement parts (discontinued by manufacturer)
High energy consumption compared to LCD
LCD technology solves these problems by providing stable, glare-free color display with a lifespan of 50,000+ hours.
Installation Guide
Step 1: Safety Preparation
Power down the CNC system and disconnect the main power supply. Wait 5 minutes for capacitors to discharge completely. Verify no voltage present before proceeding. Wear anti-static wrist strap when handling electronic components.
Step 2: Remove Existing CRT
Carefully disconnect the HONDA 20-pin signal cable and power connector from the back of the CRT. Remove mounting screws (typically 4-6 screws) and gently slide the CRT unit out of the control cabinet. Be careful not to damage the CRT glass.
Step 3: Prepare LCD Kit
Unpack the A61L-0001-0095 LCD kit and verify all components are present: LCD panel, mounting brackets, cables, and installation manual. Check the LCD panel for any shipping damage. Confirm the HONDA 20-pin connector is intact.
Step 4: Install LCD Panel
Position the 8-inch TFT-LCD panel using the same mounting points as the original 9-inch CRT. The A61L-0001-0095 is designed with identical dimensions - it's a direct drop-in replacement requiring no modifications to the cabinet or mounting holes.
Step 5: Connect Cables
Connect the HONDA 20-pin signal cable to the LCD interface. Connect the DC 24V power cable to the original power supply connector. Ensure all connections are secure and properly seated. The LCD kit is designed to work with the original power supply - no additional power adapters needed.
Step 6: Test and Verify
Restore power and boot the CNC system. Verify the display shows clear, stable color images. Check all display functions including:
Text display clarity (letters, numbers, G-codes)
Graphics and tool path display
Alarm messages and diagnostics (should display clearly in color)
Menu navigation and parameter settings
Backlight uniformity across the entire screen
Key Advantages
Direct Replacement: Same mounting dimensions as original 9-inch CRT - no drilling or modifications required
100% Compatible: HONDA 20-pin interface matches original CRT specification
Color Clarity: Sharp, glare-free display with adjustable brightness
Industrial Grade: Designed for 24/7 operation in harsh industrial environments (dust, vibration, temperature fluctuations)
Long Lifespan: LCD technology rated for 50,000+ hours (equivalent to 15+ years of normal use)
Energy Efficient: Consumes 60% less power than CRT (reduced heat generation)
Warranty: 2-year warranty included
Professional Tips
Take photos of the original wiring before disconnecting for reference
Label all cables during removal to ensure correct reconnection
Test the display for at least 30 minutes before closing the cabinet
Keep the original CRT as a spare or for future reference
Clean the LCD screen with isopropyl alcohol and lint-free cloth only
Adjust brightness and contrast settings after installation for optimal readability
Technical Support
For replacement support or technical inquiries, contact us:
Email: info@cncdisplay.com
Phone: +86-13686889647
Available FANUC LCD Replacement Products
All FANUC display models we cover — click for specs, pricing, and ordering.
Model Description
A61L-0001-0072 8" TFT $480
A61L-0001-0074 12.1" TFT $299
A61L-0001-0076 8" Plug & Play $280
A61L-0001-0077 12.1" TFT
A61L-0001-0078 12.1" TFT
A61L-0001-0086 8.4" TFT $280
A61L-0001-0087 8.4" TFT
A61L-0001-0090 8" TFT LCD $350
A61L-0001-0092 8" TFT $280
A61L-0001-0093 8" Plug & Play $155
A61L-0001-0094 12.1" TFT $299
A61L-0001-0095 8" TFT $199
A61L-0001-0096 12.1" TFT $350
A61L-0001-0097 12.1" TFT $350
A02B-0094-C022 LCD Upgrade
A02B-0099-C094 LCD Upgrade
A02B-0200-C071 LCD Upgrade
A61L-0001-0116 LCD Upgrade
A61L-0001-0136 LCD Upgrade
Top comments (0)