DEV Community

Positioning Stages
Positioning Stages

Posted on

The Motorized Positioning Stage RFQ Checklist: What to Send for an Accurate Quote

The quality of a quotation depends on the quality of the request. A request that says "XY stage, 25 mm, high accuracy" gets either a guess or a round of questions. A request that states motion, load, orientation, precision basis and supply scope gets a firm answer faster. This checklist follows the structure of the positioningstages.com request-a-quote form, so you can prepare everything before you start.

CYDXYR120-1205-25-100W-L XYθ multi-axis stage, an example of a complete assembly quote

Complete multi-axis assemblies are one of the supply-scope options in the inquiry form. Photo: positioningstages.com.

Gather the basics first

1. Contact and context

Name, work email, company or institution and country are required. Phone or WhatsApp is optional. If you already know a model or series, add it; if you found a candidate with the stage selector, quote its part number exactly, because part numbers encode table, screw, travel and motor frame.

2. Application and motion

Pick the application: imaging or microscopy, optical alignment or photonics, inspection or metrology, assembly or dispensing, research or laboratory, or other. Then the motion: one linear axis, XY, XYZ, rotation, tilt, vertical lift, XY plus rotation, or a custom arrangement. Say what moves (sample, camera, optics, tool or a complete fixture) and the motion sequence: move-settle-measure, continuous scanning, repeated point-to-point or a coordinated path. "Not yet defined" is a valid answer for each and invites guidance.

Define motion, load and precision

3. Travel and angle per axis

State the total travel for every axis and the angle for every rotary or tilt axis. Avoid ± notation unless you mean it, and say so; positioningstages.com converts half-range catalogue figures to totals precisely because the two are easy to confuse. Add the approach and clearance margin you need at each end.

Dimensioned drawing of the CYGXS60-0601-20-28 linear stage used as an RFQ reference

Reference the drawing revision in your RFQ. Drawing: positioningstages.com.

4. Load and orientation

Give the total moving load in kg, g or lb, including fixtures and adapter plates. Describe the centre of mass position if it is off-centre. Choose an orientation: horizontal, vertical with the load travelling up and down, inverted, or several. The catalogue's payload values are presumed horizontal and centred, so orientation is the field that most often changes the recommendation.

5. Precision target with its basis

Enter the number and say which quantity it is: repeatability, positioning accuracy or step size, with a unit from µm, mm, degrees, arc-minutes or arc-seconds. If reversals matter, ask for bidirectional repeatability and backlash, since the catalogue does not publish them. If you have an acceptance method, describe it; no measurement standard or test temperature is cited in the catalogue, so your method becomes the reference.

Environment, control and supply scope

6. Environment and quantity

Choose indoor laboratory, factory floor, cleanroom, vacuum or other, and add pressure, cleanliness or temperature limits in the details. Give the quantity, since a single prototype and a repeat OEM requirement are quoted differently.

Linear stage connected to a controller enclosure, illustrating electronics in the supply scope

Drive, controller and cables must be named in the supply scope. Image: positioningstages.com.

7. Control and supply scope

Preferred control can be PC, PLC or machine integration, an existing controller, a standalone controller or a recommendation. Supply scope can be stage only, stage and controller, a complete multi-axis assembly, an upgrade or replacement, or a recommended configuration. Each product page lists drive, controller, cable set, CAD and mounting hardware as Not stated, so name each item you expect. The site's guide on comparing quotations by included components and options helps when you have several offers.

8. Attachments

Attach up to three drawings or photos. A photo of the part and a rough fixture sketch are often more useful than a long description. Send native CAD after engineering replies, which keeps unscanned executable files out of the first exchange. Label each file so the engineer can match it to the axis or fixture it describes.

What happens next

Engineering checks travel, load, accuracy, speed and orientation together, asks before pricing if a requirement is unclear or a standard model cannot meet it, then issues a quote that states inclusions, options and known exclusions. Read the specification basis guide and the editorial on writing a positioning stage RFQ for more detail.

Common gaps in RFQs

The requests that need the most follow-up usually miss one of four things: orientation, the precision basis, the moving mass of fixtures, or the electronics. A two-line note covering those saves a round of email. If the project is a prototype that may move to OEM volume later, say so at the start; the requirements package tends to grow, and early notes on datums, limits and drawings make the later hand-over easier.

Frequently asked questions

Do I need a drawing to ask for a quote?

No. Drawings are optional. The form lets you pick "Not yet defined" for most fields and ask for guidance.

What files can I attach?

Up to three PDF, JPEG, PNG, WebP or TIFF files, 10 MB each and 25 MB combined. Native CAD is sent after engineering replies.

Does submitting create an order?

No. The site states that submitting is not an order, there is no charge and the form creates no purchasing commitment.

What happens after I submit?

Engineering reviews travel, load, accuracy, speed and orientation together, asks about missing details, then defines the supply scope with inclusions, options and known exclusions.

Contact

Ready to ask for a quote? Send whatever parts of this checklist you know; unknowns are fine and engineering will ask about the rest. Email sales@deyivision.com or visit the positioningstages.com contact page.

Top comments (0)