Closing an office is mostly a facilities project. Someone negotiates the lease exit, someone books movers, someone decides what happens to the standing desks. The laptops usually get one line on the plan: “employees take their devices home.” That line is where a lot of hardware quietly goes missing over the following year.
This piece is for HR and IT leads at companies moving from an office (or several) to a fully remote setup. The goal is simple: when the keys go back to the landlord, you should know exactly which device is with which person, at which address, and you should already have a plan for getting each one back when that person eventually leaves.
Why office closures create a device blind spot
While everyone works from the same building, a lot of device tracking happens informally. IT can walk over to a desk. Spare laptops sit in a locked cabinet. A broken machine gets swapped at the help desk in ten minutes. None of that survives the move.
A few patterns show up again and again:
- Pool and loaner devices walk out the door. The spare laptops, the conference room machine and the “test” device on the IT shelf get taken home by whoever was nearest, with no record of who.
- Desk hardware gets split up. Docks, monitors and peripherals go to some homes and not others, and the asset list stops matching reality.
- Some people leave instead of going remote. A closure is a natural moment for resignations. Those exits happen during the busiest weeks of the move, when nobody is watching the offboarding checklist closely.
- Addresses change. Without an office to commute to, some employees move, sometimes to another state, and the home address on file goes stale.
- The old recovery method disappears. “Drop it off at the front desk on your last day” stops being an option the day the front desk closes.
None of this means the move was a mistake. It means the device process has to move with the people.
Before move-out: build the list you will rely on later
The weeks before the closure are your best chance to get clean data, because every device is still in one place.
Run a physical count. Walk the floor, open the cabinets and scan or note every laptop, tablet and phone in the building. Compare it with the asset system. Anything that exists in the building but not in the system gets added now.
Assign every device to a named person. “Marketing team” is not an owner. If a loaner is going home with someone, it gets assigned to them like any other device. If nobody needs it, it stays with IT.
Confirm the home address for each person. Ask everyone to verify where they will actually be working once the office is gone. This single step prevents a lot of returned kits from bouncing later.
Decide what happens to surplus. Extra laptops can be reassigned, stored with a trusted person in IT, or sent to wherever your remaining equipment will live. Write that decision down instead of letting the devices drift into people’s homes by default.
Handle the exits that happen during the move
If someone resigns or is let go while the office is closing, treat their device return as its own task, not as part of the move.
- Collect the device in person while the office is still open, if their last day allows it.
- If their last day falls after move-out, send a return kit to their home address before the last day, so the conversation happens while they are still engaged.
- Record the return on the same asset list you built for the closure, so the counts stay honest.
The busiest weeks are exactly when small gaps turn into lost laptops. A short, separate checklist for leavers keeps them from getting buried under moving logistics.
After move-out: plan the return before anyone leaves
Once everyone is remote, every future exit is a remote exit. That changes the return process permanently, so it is worth setting it up deliberately rather than improvising the first time someone quits.
Pick one way devices come back. Mixed approaches (some people buy their own box, some use a courier, some hold on to the laptop “until someone asks”) make it hard to see what is outstanding. One standard method makes every return look the same.
Use packaging made for the device. A laptop in a reused shoebox is a damage claim waiting to happen. Custom-fit packaging, a prepaid label and a tamper-evident seal make the return easy for the employee and give IT something to check when the box arrives.
Track every return in one place. Each return should have a status that HR and IT can both see: kit sent, kit delivered, device shipped, device received. A shared view removes most of the “did they ever send it back?” emails.
Keep employee communication consistent. Remote leavers respond best to clear, friendly messages that explain what to return, how to pack it and what happens next. Automated notifications help here, because the reminders go out the same way every time regardless of who is busy that week.
A simple closure checklist
Before the keys go back:
- Physical count of every device in the building, reconciled with the asset system.
- Every device assigned to a named person, including loaners and spares.
- Home addresses confirmed for everyone who will work remotely.
- Surplus devices assigned to an owner or a storage location.
- Separate return plan for anyone leaving during the move.
- One standard remote return method agreed by HR and IT.
- Return statuses tracked in one shared place.
Where a return service fits
Companies that close an office often find that the first few remote exits are the hardest, because the new process has never been tested. An employee laptop return service gives you that process ready-made: you send the leaver a kit, they pack and ship it, and you watch it come back on a dashboard.
ReRoutd is one option built for this. Laptop Kits are $89 each ($79 each for five or more) and fit laptops up to 17 inches. Tablet Kits are $69 ($64 for five or more) for tablets up to 12 inches, and Phone Kits are $59 ($54 for five or more) for phones up to 7 inches. Every kit includes custom-fit packaging, a prepaid return label, a tracking dashboard, automated employee notifications and a tamper-evident seal, with optional insurance up to $5,000. There are no subscriptions, and it works across the US.
The takeaway
An office closure is the last time all of your devices sit under one roof. Spend a few days getting the list right before move-out, give leavers during the transition their own checklist, and set up a single remote return process before you need it. The lease ends once; the device process has to keep working long after.
The ReRoutd team
Top comments (0)