The pattern pages so far have mostly been floors and walls: tin-glazed tiles, cut tile and poured cement, broken tile, clay inlaid in clay. Sutton Hoo is jewellery. It is after the gold found in the ship burial at Sutton Hoo in Suffolk: clasps and sword fittings covered in red garnets, each stone set in its own small gold cell. The technique is called cloisonné, and it is the same problem as a floor, a few millimetres across. A surface is filled with small flat pieces, and there is something between them. On a floor that is mortar and here it is a wall of gold.
The clasp preset, after one half of a shoulder clasp from mound one. Every red stone is a cell grown from squares, cut to fit, and laid over stamped foil.
What is under the stone
The ship was found in 1939 by Basil Brown, the archaeologist Edith Pretty had taken on the year before to dig the mounds on her land in Suffolk. It was twenty-seven metres long and lay under the largest of them, with a wooden chamber built in the middle of it. A team under Charles Phillips of Cambridge emptied the chamber that July. The man it was built for is usually thought to be Rædwald, king of the East Angles, who died around 625, though nothing in the grave names him. He went into the ground with a sword, a purse of thirty-seven Frankish gold coins and a set of gold fittings: shoulder clasps, the purse's lid, buckles, and the pyramids and bosses from the sword's scabbard. More than four thousand garnets were found in the burial, most of them on that gold.
Cloisonné starts with a gold back plate and thin strips of gold soldered to it on edge, so the plate becomes a tray of small cells. Each cell gets a bed of paste, then a scrap of gold foil stamped with a fine grid, then a flat slice of garnet shaped to the cell's outline, however many corners that outline has. On Anglo-Saxon jewellery of these decades the foil has been measured at about three hundredths of a millimetre thick, with between two and four and a half lines to the millimetre, stamped as a sheet and then cut up. It is there for the light. Light goes down through the stone, meets a surface with hundreds of small facets, and comes back up through the red from whichever of them face you, which is why the stones glitter as you move. Nobody has yet worked out how the garnets were cut so small and so thin. Birmingham Museums, which looks after the Staffordshire Hoard, lists it as a question still without an answer.
A stone on the page is painted in that order, and the comments in the function read like the bench:
// one stone: cut to its cell, then foil, the waffle, the red, the light
g.fillStyle = pal.foil; g.fill();
// every scrap of foil was cut and dropped in at its own turn
const pat = g.createPattern(foilTile(pal), 'repeat');
pat.setTransform(new DOMMatrix().translate(c[0] + rng(), c[1] + rng())
.rotate((rng() - 0.5) * 50).scale(st.foil / 16));
g.fillStyle = pat; g.fill();
// the garnet: a slice thin enough to see through, some thicker than others
g.globalCompositeOperation = 'multiply';
g.fillStyle = hslCss(h + (rng() - 0.5) * 0.015, s, l + (rng() - 0.5) * 0.08);
g.fill();
The foil is a sixteen-pixel tile of one stamped pyramid with four faces at four brightnesses, repeated. Each stone gets it at its own angle, up to twenty-five degrees either way, because each scrap was cut from the sheet and dropped in separately. The red is multiplied over it rather than painted on top, which is what a coloured slice does to the light coming back through it. After that come a darker rim where the wall shades the foil, a glow on the side away from the light, where the light that went in comes back out, and one band of polish across the flat top. Zoom in and the waffle is there under every stone, turned a different way in each.
The clasp at full zoom. The grid under each stone is the foil, and no two scraps of it went in at the same turn.
Cells grown on squared paper
The cells on the real pieces are stepped. The British Museum's catalogue calls the clasps' panels geometric stepped cell-work and the bosses' cells mushroom and step-cut, and nearly every edge in them is a staircase of right angles. They look like something worked out on squared paper, and that is how the page makes them. There is a grid of squares, and a rule that takes a square and gives back the name of the cell it belongs to. Squares with the same name that touch are one cell. The page then walks round the outside of them, edge by edge, to get the outline.
The stepped rhomboid is every square within n steps of a centre, counting steps along the grid and not diagonally. Put the centres on the lattice (n+1, n), (-n, n+1) and those diamonds pack with no gaps. The rule the clasp uses cuts each one in four round its middle square:
// the rhomboid quartered round its middle square, which is glass
cell(i, j, n) {
const [s, t, dx, dy] = ball(i, j, n); // which diamond, and where in it
if (!dx && !dy) return { id: `p${s},${t}`, role: 'c' };
const q = dx > 0 && dy >= 0 ? 0 : dx <= 0 && dy > 0 ? 1
: dx < 0 && dy <= 0 ? 2 : 3;
return { id: `p${s},${t},${q}`, role: 'g' };
}
Four L-shaped garnets turn round one small square, and the square is a centre, which can be glass. There are five rules: the rhomboid whole, the rhomboid quartered, a stepped Z made of two runs of squares with the lower one shifted along, a basket weave of strips, and plain running bond. A steps slider sets n, so the same rule gives small plain cells or large ones with long staircases.
Three of the five rules on the same clasp: the rhomboid whole, the rhomboid quartered, and the stepped Z.
A panel on a clasp is symmetric, and a rule on its own is not. So the grid is folded about its middle before the rule is asked: square (3, 5) and its mirror image ask about the same square, get the same name, and come out as the same shape reflected. Where a cell touches the fold it meets its own reflection, the two halves have one name, and they join into a single wider stone down the centre line. What goes in a cell is also decided from its name, so a blue glass on the left has a blue glass opposite it on the right.
The same grid, bent
Once the cells are a rule on a grid, the grid can go anywhere. Each panel has a function that says where a grid point lands, and three of them cover every object on the page.
Flat is the field of the clasp and the straight runs of its border. Round bends the rows about a centre. That is the clasp's curved end, and the whole of a scabbard boss, where the grid closes into a ring. The number of squares round the ring is rounded to a whole number of the rule's repeats, and the rule is asked past the seam, so a cell that crosses the join is still one cell and there is no seam to find. Leaning sets a panel back as one face of a pyramid seen from above, narrower at the top than the base. The sword pyramid is four of those and a folded square on top, and each face is lit by which way it leans, so the pyramid has a bright side and a side in shade.
The pyramid and boss presets. One rule, leant back four times for the pyramid and bent into two rings for the boss.
The real pieces have things the page does not attempt. Each round end of a clasp holds two interlocking boars, their shoulders slabs of millefiori and their tusks blue glass, and the border round the panel is a run of interlaced serpents with blue glass eyes. I have the same rules bent round half a centre, and a border of smaller cells, which keeps the outline and loses the animals. The pyramid is closer. The real ones carry the same design on all four faces, wedges of blue glass at the corners and chequered millefiori on top, and so does mine.
The cutter's third job
A cell's outline is exact, and a stone ground by hand is not. Every cell goes through cutPiece, the function that Alicatado wrote to cut glazed tile and that moved into the package when Trencadís needed to break tile with it. It shifts and turns the piece a little, nicks its corners, bows its long edges, and insets it by half the joint. For a tile floor the joint is lime mortar. Here it is passed the width of the gold wall:
const { inner, c } = cutPiece({ poly: cell.poly, area },
{ cut: st.cut * 2.5, mortar: st.wall }, rng);
The cutter was written for pieces of tile a few centimetres across and did not need changing for stones a few millimetres across, since it only ever sees a polygon. A cut slider sets how far a stone strays from its drawing. At the clasp's setting the stones sit tight in their cells. Nothing new went into the package this time. The code that turns a grid and a rule into outlines stays on the page until a second piece wants cells built from squares.
A buckle with no stones
The great gold buckle is 13.2 centimetres long and weighs 412.7 grams, and it is gold and niello with no garnets on it at all. The plate is a hollow box that opens at the back and locks with three sliders. Its face is thirteen creatures, snakes and four-legged beasts, knotted through each other, with niello, a black alloy, inlaid along their bodies.
That is Knotwork, which is in the package already. The page builds a knot on a grid ten squares by twenty, masked to the buckle's outline with holes left for the three bosses, and paints it with gold ribbons and a black line down the middle of every strand. It is a knot with a few beasts' heads on its loose ends and makes no attempt at the thirteen animals. Dots of niello are punched round the rim and the bosses sit in rings of beaded wire.
The buckle preset. Knotwork's interlace in gold, with niello where the vellum pages had ink.
Kent and Staffordshire
Two presets leave Sutton Hoo. Kingston is after the Kingston Brooch, which came out of grave 205 on Kingston Down in Kent in August 1771. Bryan Faussett ran the dig from his carriage, laid up with gout, and his son Henry did the digging. The brooch is in the World Museum in Liverpool: a disc eight and a half centimetres across, in gold, garnet, blue glass and white shell. The preset is the boss with small quartered cells, a redder gold, oranger stones, and the glass slider at its top so that every centre is blue.
Hoard is after the Staffordshire Hoard, which Terry Herbert found with a metal detector in a field near Lichfield in 2009. It holds more than 3,500 cut garnets, nearly all on fittings that had been pulled off swords before they were buried, and some of the garnet strips are snapped in half. The preset is a clasp in paler gold and darker stones with the cut turned up and age switched on. Age takes about one stone in twelve out altogether and cracks one in seven of the rest. A lost stone leaves the brown paste it was bedded on, sometimes with a scrap of foil still in the cell, and the gold wall's shadow falls across the empty floor on the side the light comes from.
The kingston and hoard presets. Kent has the blue glass, and the hoard has the empty cells.
Trying it
Sutton Hoo opens on the clasp. The six presets are the clasp, the pyramid, the boss, the buckle, kingston and hoard, and the advanced tab has the four objects, the five cell rules, three golds, and sliders for steps, the wall's width, the foil's pitch, how much glass, the cut and where the light comes from. Double-tap for a new one of whatever is showing. The presets' seeds are the dates and measures above: 1939 for the clasp, 625 for the pyramid, 27 for the boss, 412 for the buckle, 1771 for kingston and 2009 for the hoard.






Top comments (0)