Work gloves are often reused across multiple shifts, so proper storage is important for maintaining their condition and protective function. Gloves should be cleaned when necessary, dried properly, and stored in a suitable place between shifts.
** Clean Gloves Before Storage
If gloves are dirty after work, clean them according to the manufacturer's instructions. Gloves exposed to chemicals or other hazardous substances may require special handling.
** Let Gloves Dry Properly
Wet gloves should be allowed to dry completely before storage. Keep them in a well-ventilated area and avoid excessive heat, which can damage some materials.
** Store Gloves in a Suitable Place
Work gloves should be kept in a clean, dry, and well-ventilated area, away from direct sunlight, excessive heat, moisture, and chemicals.
Different types of gloves should also be separated when necessary to prevent contamination and make it easier to select the right gloves for each task.
** Inspect Gloves Before Reuse
Before the next shift, check for:
- Holes or tears
- Excessive wear
- Cracked or hardened material
- Damaged coatings
- Chemical contamination
Damaged gloves should be removed from use rather than returned to storage.
** Follow the Manufacturer's Instructions
Storage and cleaning requirements vary depending on the glove material and purpose. Always follow the manufacturer's instructions, especially for chemical-resistant, cut-resistant, and electrical protective gloves.
** What Should Be Done With Damaged Gloves?
If gloves are no longer suitable for the job, they should be removed from service. Depending on the manufacturer's instructions, they may need to be cleaned, evaluated, or replaced.
Good storage practices are simple: clean, dry, store properly, and inspect before reuse. This helps workers begin each shift with gloves that are appropriate for their task.
Top comments (0)