The shape now flying as Sierra Space's Dream Chaser was first sketched, in 1965, by a Soviet aerospace engineer who would not see anything resembling it reach orbit. The chain from the sketch to the spacecraft is six decades long, runs through five governments, and turns on a single roll of film taken from an Australian patrol aircraft in March 1983. The Russian-language histories tell most of it. The English-language histories tell the rest. Neither tells it cleanly, because the story does not lend itself to a clean telling.
The American Space Shuttle, contrary to a popular framing, is not part of this lineage. The Shuttle and the Soviet program ran in parallel; the Shuttle's design choices were independent and, on the Soviet side, were eventually copied wholesale into a different vehicle (Buran). What follows is the smaller, stranger story: a Soviet idea that was killed by its own defense ministry, kept alive in disguise for two decades, photographed by accident, reverse-engineered in Virginia, and finally built in Colorado.
A program called Spiral
In 1965, the Soviet Air Force tasked the Mikoyan design bureau with developing a small piloted spaceplane that could be launched, perform a mission in low Earth orbit, and return like an aircraft. The program was called Spiral. The lead engineer, Gleb Lozino-Lozinsky, was 56 years old, had come to aviation from steam-turbine engineering, and had spent the previous two decades at Mikoyan. He took the assignment as if it were the only thing he had ever wanted to do.
The Spiral system was three vehicles stacked: a hypersonic carrier aircraft on the bottom, a small orbital plane on top, and a two-stage rocket booster between them. The carrier was supposed to fly to roughly Mach 6 on liquid hydrogen, release the orbital plane and booster at altitude, and turn around. The booster would push the orbital plane the rest of the way to orbit and then drop away. The orbital plane would do its work — reconnaissance, satellite interception, in some variants a nuclear strike — and return to a runway. Most of the system was supposed to be reusable, on a quick turnaround.
The hypersonic carrier never reached production. The materials and engines required for sustained Mach 6 flight on liquid hydrogen did not exist in 1965, and Soviet industry did not develop them in time. The orbital plane was different.
The wing trick
The orbital plane's distinctive feature was a variable-dihedral wing design that no one had built before. During launch and atmospheric reentry, the wings folded upward to roughly sixty degrees, becoming near-vertical fins. After the vehicle decelerated to subsonic speeds, the wings rotated back to horizontal for landing.
The wing fold solved two problems at once. The first was heat. Reentry leading-edge temperatures on a winged spacecraft can reach roughly 1500 °C, hot enough to make aluminum a memory and titanium a suggestion. With the wings rotated into the aerodynamic shadow of the fuselage, the worst of the heating was redirected onto the lifting-body's flat bottom, which carried a heat shield assembled from interlocking metal plates on ceramic bearings — a fish-scale arrangement that expanded with temperature without losing its position relative to the airframe.
The second problem was stability. At hypersonic speeds an aircraft tends to lose lateral and directional control as the aerodynamic forces redistribute. The folded wings, standing nearly vertical, served as enormous tail fins precisely when the vehicle most needed them. When the air thickened and the speeds dropped, the same surfaces became wings again. The cabin was a separable capsule with its own tiny braking rocket and parachute, in case anything went catastrophically wrong on the way home.
A subsonic atmospheric prototype, the MiG-105.11 (colloquially the "Lapot," meaning a kind of woven peasant shoe, after the upturned nose), was built and flown from 1976. It never went to space; it was meant to validate the aerodynamics at low speeds. It was tested on landing skis. There is a much-told story about technicians using halved watermelons as lubrication under the skids when the friction with the ground was too high to break with thrust alone. The story is well-attested in Russian aerospace memoirs and is funnier than it sounds.
"This is a fantasy"
In 1969, Soviet Defense Minister Andrei Grechko wrote on the Spiral file: "this is a fantasy. We must spend money on more concrete items." The program was halted. Lozino-Lozinsky kept the engineering team working on smaller pieces of the design under different program names, but the Spiral system as a whole was dead.
The Soviet leadership eventually replied to the American Space Shuttle program with Buran — a much larger vehicle that copied the Shuttle's basic configuration, flew once on November 15, 1988, and was cancelled along with the Soviet Union three years later. Buran was not Spiral. It used different aerodynamics, different scale, different operational concept. The connection is Lozino-Lozinsky himself, who led the Buran team after Spiral was killed and ran a parallel test program for the Spiral-derived shape under the cover of Buran thermal-protection research.
The Indian Ocean photographs
The most important thing Lozino-Lozinsky kept alive was a series of unmanned scaled prototypes called BOR-4 — Bespilotny Orbitalny Raketoplan, "unmanned orbital rocketplane." A BOR-4 was a half-scale model of the Spiral orbiter, less than four meters long and under one and a half tonnes. It was launched on a Kosmos-3M rocket from the Kapustin Yar test range, flew about one and a half orbits, deorbited, deployed a parachute, and splashed down in the Indian Ocean for recovery by Soviet ships.
The first orbital BOR-4 flight was June 3, 1982, recovered at 17 °S 98 °E, about 560 kilometers south of the Cocos Islands. The vehicle was given a Cosmos-series cover designation, Cosmos-1374, to obscure its purpose. On the second flight, recovered March 16, 1983, a Royal Australian Air Force P-3 Orion patrol aircraft happened to be in the area. The Orion took photographs of the recovery operation — the small wedge-shaped craft floating in the water, then being hoisted aboard a Soviet ship.
Those photographs were sent to NASA.
Reverse engineering at Langley
Starting in 1983, the Vehicle Analysis Branch at NASA Langley Research Center used the photographs to estimate the BOR-4's dimensions, mass, and center of gravity. They built scale models and tested them in the wind tunnel. The shape's aerodynamic performance from orbital reentry down to low supersonic speeds was, according to NASA's own materials, very good.
In 1989 those findings became the basis of a NASA concept called the HL-20 Personnel Launch System, a six- to eight-person crew vehicle for low Earth orbit. Rockwell International ran a year-long study under NASA Langley contract starting October 1989. North Carolina State University and North Carolina A&T students built a full-size engineering mockup in 1991, used for studying crew layout and ingress. The HL-20 program was cancelled in 1993, having built no flight hardware.
The shape, however, kept moving.
In 2006, NASA transferred the HL-20 design materials to SpaceDev, a small private space company. SpaceDev signed a Space Act Agreement with NASA in June 2007 and began building what it called Dream Chaser. On October 21, 2008, Sierra Nevada Corporation acquired SpaceDev for $38 million and continued development. In 2021, the program was spun out as Sierra Space. The first Dream Chaser cargo vehicle, Tenacity, is contracted to deliver supplies to the International Space Station.
The Dream Chaser dropped Lozino-Lozinsky's most striking innovation. Its wings do not fold. The fish-scale heat shield was replaced with the standard ceramic-tile approach. But the lifting-body shape is recognizably the BOR-4 shape, which is recognizably the Spiral shape, which was sketched on Soviet drafting tables in 1965.
After Spiral
Lozino-Lozinsky died on November 28, 2001, at ninety-one. He had spent the previous decade trying to revive a successor program — MAKS, an air-launched orbiter that would have used the Antonov An-225 as a carrier — and had gotten as far as cooperative agreements with British Aerospace before the dissolution of the Soviet Union and the rupture of Soviet-Ukrainian aerospace ties killed it. He was the chief designer at NPO Molniya until the day he died.
The Russian aerospace industry's institutional memory of Spiral is preserved in a museum at Monino, where the MiG-105.11 still sits on its lawn. The American institutional memory is in the Sierra Space factory in Colorado, where Tenacity is being prepared for flight.
What an idea outlives
The lesson is not that the Soviets were robbed, or that the Americans plagiarized, or that one system worked and the other didn't. The lesson is that an aerospace shape — a particular wedge, with a particular ratio of length to span, with a particular bottom curvature — has a half-life of decades regardless of the country that thinks it owns it. The Spiral program was killed by a defense minister who called it a fantasy and was, in his time, correct: the carrier aircraft was infeasible, the budget was unsustainable, the political moment was wrong. He was wrong about the shape.
The shape is still flying. It will land on a runway, eventually, the way Lozino-Lozinsky drew it.
Top comments (0)