In compact, power-sensitive designs, every microamp and every millivolt matters. That’s where the TPS7A2033PDBVR, a high-performance low-dropout (LDO) linear regulator from Texas Instruments, comes in. Delivering ultra-low quiescent current, high PSRR, and tight voltage regulation, this device is engineered to power precision analog and microcontroller applications with minimal noise and exceptional stability.
Let’s dive into the features, applications, and design insights of the TPS7A2033PDBVR and see why it's a go-to LDO for engineers designing battery-powered and noise-sensitive systems.
⚙️ What is the TPS7A2033PDBVR?
The TPS7A2033PDBVR is part of the TPS7A20 series, a family of LDO voltage regulators optimized for ultra-low IQ performance. This specific variant provides a fixed 3.3V output at up to 300mA, with a typical quiescent current of just 1 μA.
It is packaged in a space-saving SOT-23-5 form factor and is ideal for applications requiring tight regulation with low power consumption.
🔑 Key Features
Output Voltage: Fixed 3.3V
Output Current: Up to 300 mA
Dropout Voltage: Typically 115 mV at 100 mA
Quiescent Current (IQ): 1 μA (typical), 4 μA max
PSRR: 62 dB at 1 kHz
Output Voltage Accuracy: ±1.5%
Operating Temperature: –40°C to +125°C
Package: SOT-23-5 (PDBV), compact and thermally efficient
Protection Features: Thermal shutdown, current limit, short-circuit protection
📌 Why It Stands Out
✅ Ultra-Low Power: At just 1 μA, it extends battery life in always-on designs
✅ High PSRR: Suppresses noise from DC/DC converters or RF sources
✅ Tight Regulation: Maintains stable output for sensitive analog circuitry
✅ Small Footprint: Ideal for wearable and handheld devices
✅ Robust Protections: Prevents overheating and overcurrent failure
📈 Application Use Cases
Thanks to its compact form and power efficiency, the TPS7A2033PDBVR is an ideal fit for:
🔋 Battery-Powered Devices
Smart sensors
Fitness trackers
Wireless earbuds and headsets
📡 Low-Noise Analog Systems
Operational amplifier circuits
Precision ADC/DAC power rails
Low-noise RF systems
📱 Portable Electronics
Smartphones and tablets (subsystems)
Bluetooth and Wi-Fi modules
Wearable medical devices
🧠 Microcontroller-Based Applications
MSP430 / STM32 / ESP32 low-power systems
RTC and memory backup supplies
🔧 Design Considerations
When integrating the TPS7A2033PDBVR, keep in mind:
Output Capacitor: Use a low-ESR ceramic capacitor (typically 1 μF) for stability
Thermal Dissipation: Despite its size, layout should account for heat dissipation under full load
Enable Pin: Tie to VIN for always-on, or connect to GPIO for software control
Input Filtering: Decoupling with a 1 μF input capacitor helps suppress line transients
Load Transients: Fast response makes it suitable for MCUs with quick wake-up bursts
The TPS7A2033PDBVR is a highly efficient and compact LDO regulator designed to meet the demands of today’s power-conscious designs. Whether you’re powering analog sensors, RF circuits, or ultra-low-power microcontrollers, this device delivers rock-solid performance with minimal current draw.
For developers seeking a compact yet reliable power source with outstanding noise performance and efficiency, the TPS7A2033PDBVR stands out as an ideal choice.
Top comments (0)