DEV Community

Cover image for Deep dive into the Vue Composition API's watch() method
Ekene Eze (Kenny)
Ekene Eze (Kenny)

Posted on

Deep dive into the Vue Composition API's watch() method

Introduction to the Watch API

The watch API is part of the larger Vue Composition APIs. It takes a data source and a callback function that executes when the provided data changes.

watch(data, (currentValue, oldValue) => {
  console.log(currentValue);
  console.log(oldValue);
});
Enter fullscreen mode Exit fullscreen mode

In my experience, I’ve found that whenever I need to track reactive data and perform some operation when the data changes, computed properties were all I needed.

However, like the Options API, the Vue Composition API also shipped with watch(), which offers developers another way of watching and reacting to data changes. I have found that there’s some nuance around it and I wanted to deep dive into it in this post and shine more light on the different ways you can use it.

This is largely because it behaves differently depending on the type of data you’re watching, and it can get confusing if you’re not already familiar with it. In this post, we’ll look at how to use it when dealing with ref and reactive states as well as with arrays and objects.

Watch API with ref

A general rule of thumb when working with the watch API is to know that it takes two arguments. The first is the data source you want to watch and the second is a callback function that applies side effects to that data.

Watching a single ref

The examples that will follow are based on simple data types like: numbers, strings booleans. You can skip to examples on complex data types arrays and objects

The watch API allows us to watch a single ref or to collectively watch multiples refs. Let’s demonstrate how to watch a single ref with simple data types (strings, numbers booleans).

When watching a single ref, we simply pass it as the first argument to the watch API. Here’s a quick example:

import { watch, ref } from "vue";
export default {
  setup() {
    const name = ref("Jay");
    watch(name, (currentValue, oldValue) => {
      console.log(currentValue);
      console.log(oldValue);
    });
  },
};
Enter fullscreen mode Exit fullscreen mode

This is fairly straightforward. We are watching name to ensure that when its value changes, we perform any operation we want in the callback. In this case, we just log the current and old values to the console. The same applies to all other ref’s of simple data types like booleans and numbers.

However, that’s not the case when watching a ref of more complex data types like arrays and objects.

Complex data types

Let’s see how to do that with an array:

import { watch, ref } from "vue";
export default {
  setup() {
    const level = ref([1, 2, 3, 4]);
    watch(() => [...level.value], (currentValue, oldValue) => {
      console.log(currentValue);
      console.log(oldValue);
    });
  },
};
Enter fullscreen mode Exit fullscreen mode

Two things to notice here:

  1. We used a function to return the array we want to watch (not passed-in directly as we did in the last example)

  2. We returned a copy of the values of the array i.e ...level.value (not the existing array itself).

This is different from what we saw earlier with simple data types. But this is just an array, what if it was an object, would it be any different? Let’s find out:

import { watch, ref } from "vue";
export default {
  setup() {
    const state = ref({
      name: "",
    });   
    watch(state.value, (currentValue, oldValue) => {
      console.log(currentValue);
      console.log(oldValue);
    });
  },
}
Enter fullscreen mode Exit fullscreen mode

The difference here is that with objects, we pass the data directly into the watch API, no need to return it with a function or make a copy as we did with the array.

One more thing you’ll notice is that for both cases (array and object), the value of currentValue and oldValue is in fact the same thing. Why? here’s why and how to fix it.

Nested objects/arrays

What if we had nested objects or arrays, how do we use the watch API to monitor changes in nested arrays/objects?. Let’s start with a nested array example:

import { watch, ref } from "vue";
export default {
  setup() {
    const secondLevel = ref([5, 6, 7]);
    const level = ref([1, 2, 3, 4, secondLevel.value]);
    watch(() => [...level.value], (currentValue, oldValue) => {
        console.log(currentValue);
        console.log(oldValue);
      }
    );
  },
};
Enter fullscreen mode Exit fullscreen mode

We are watching level, which is the parent of the nested secondLevel array. Ideally, when the value of secondLevel changes, the watch API should execute and log the different values to the console. However, that won’t happen because:

Watching a reactive object or array will always return a reference to the current value of that object for both the current and previous value of the state. To fully watch deeply nested objects and arrays, a deep copy of values may be required. This can be achieved with a utility such as lodash.cloneDeep

As a result, we can use lodash to “deeply” watch the level array (this time with access to the nested secondLevel array):

import { watch, ref } from "vue";
import _ from "lodash";
export default {
  setup() {
    const secondLevel = ref([5, 6, 7]);
    const level = ref([1, 2, 3, 4, secondLevel.value]);

    watch(() => _.cloneDeep(level.value), (currentValue, oldValue) => {
        console.log(currentValue);
        console.log(oldValue);
      }
    );
  },
};
Enter fullscreen mode Exit fullscreen mode

With this, the values of both our arrays will be tracked just fine. The good thing with this approach is that we did’t have to copy the array’s values anymore, we can simply pass it into cloneDeep() and it handles the rest for us. This also applies to nested objects:

import { watch, ref } from "vue";
export default {
  setup() {
    const state = ref({
      name: "",
      location: {
        country: "",
      },
    });
    watch(() => _.cloneDeep(state.value), (currentValue, oldValue) => {
        console.log(currentValue);
        console.log(oldValue);
      }
    );
  },
}
Enter fullscreen mode Exit fullscreen mode

Watching multiple ref’s

If we had more than one item that we wanted to watch at once, we can pass them all into the watch API with an array. For instance, if we had firstName and lastName, we could watch for changes in their values at once like so:

import { watch, ref } from "vue";
export default {
  setup() {
    const firstName = ref("Jay");
    const lastName = ref("Pritchett");
    watch([firstName, lastName], (currentValue, oldValue) => {
      console.log(currentValue);
      console.log(oldValue);
    });
  },
};
Enter fullscreen mode Exit fullscreen mode

Watch API with Reactive

The way the watch API handles ref values is somewhat different from how it handles reactive. Everything we’ve done so far has been with ref values, let’s try redoing them, but this time with reactive. This way, we’ll cover both values and you will be equipped to use the watch API either way.

Watching a reactive array

Once again we start off with an array. Here’s how to watch a reactive array and react to changes in its value:

import { watch, reactive } from "vue";
import _ from "lodash";
export default {
  setup() {
    const level = reactive([1, 2, 3, 4]);
    watch(() => _.cloneDeep(level),(currentValue, oldValue) => {
        console.log(currentValue);
        console.log(oldValue);
      }
    );
}
Enter fullscreen mode Exit fullscreen mode

Using the watch API with a reactive array is no different from how we used it with a ref. In both cases, we deep cloned the array with lodash and return it as the first argument to the watch API. The only difference here is that we did not append .value to read the value of the level array.

Watching a nested reactive array

To cut to the chase quickly, using lodash like we did in the last example ensures that we track every aspect of the data we want to watch. As a result, if we have deeply nested arrays, it will track the values as well:

import { watch, reactive } from "vue";
import _ from "lodash";
export default {
  setup() {
    const secondLevel = reactive([5, 6, 7]);
    const level = reactive([1, 2, 3, 4, secondLevel]);
  watch(() => _.cloneDeep(level), (currentValue, oldValue) => {
      console.log(currentValue);
      console.log(oldValue);
    }
  );
}
Enter fullscreen mode Exit fullscreen mode

This is almost exactly the same with the ref example, with the exception of the .value appends.

Watching a reactive object

When dealing with objects, I personally tend to go with reactive by default. However the implementation is also not very different from how you would approach a ref:

import { watch, reactive } from "vue";
import _ from "lodash";
export default {
    const state = reactive({
      name: "",
    });
    watch(() => _.cloneDeep(state),(currentValue, oldValue) => {
        console.log(currentValue);
        console.log(oldValue);
      }
    );
}
Enter fullscreen mode Exit fullscreen mode

You can watch an object or an array by deep cloning it using lodash. I have made this approach my default since in most cases, I want to track both the previous and current values of the data I’m watching. If you’re okay tracking just the current values, you don’t need to use lodash here.

Watching a nested object

deep

The watch API can also take a third argument deep, which when set to true, will extend its functionality to keep an eye on deeply nested values:

import { watch, reactive } from "vue";
export default {
  setup() {
    const state = reactive({
      name: "",
      location: {
        country: "",
      },
    });
    watch(() => state, (currentValue, oldValue) => {
        console.log(currentValue);
        console.log(oldValue);
      },
      { deep: true }
    );
}
Enter fullscreen mode Exit fullscreen mode

However, because it doesn’t track both previous and current values of state, lodash is still my preferred option for using the watch API with reactive nested arrays and objects:

import { watch, reactive } from "vue";
import _ from "lodash";
export default {
  setup() {
    const state = reactive({
      name: "",
      location: {
        country: "",
      },
    });
    watch(() => _.cloneDeep(state), (currentValue, oldValue) => {
        console.log(currentValue);
        console.log(oldValue);
      },
    );
}
Enter fullscreen mode Exit fullscreen mode

Watch a specific property in the reactive object

When watching a specific property in a reactive object, the first argument you pass to watch() will be an anonymous function that returns the specific property you want to watch.

Note that in this case, deep copying the object is not required:

import { reactive, toRefs, watch } from 'vue'
export default {
  setup() {
    const state = reactive({
      name: "",
    })
    watch(() => state.name, (currentValue, oldValue) => {
      console.log(currentValue)      
      console.log(oldValue)
    })
  }
}
Enter fullscreen mode Exit fullscreen mode

It is worthy to note that there’s a significant difference in how we watch an entire reactive object and how we watch a specific property in a reactive object as I just demonstrated above. If it’s not clear, feel free to text me on Twitter and I’ll be happy to provide some more clarity.

watchEffect

It would be incomplete to finish this post without telling you a little bit about watchEffect(). Unlike the watch API, it takes only one argument, which is a callback function that runs immediately and re-runs when any of its dependencies change. Maybe in a future post, we can look at watchEffect in more detail but in the meantime, you can learn more about it here.

Hope this helps you understand how to use the watch API in more detail. If you prefer to learn with videos, I made a not so comprehensive tutorial on YouTube as well.

More resources

Official Vue.js documentation
Vue 3 watch API deep dive – YouTube tutorial
Launching with the Composition API — Free Video Course

Top comments (0)