DEV Community

Eview GNSS
Eview GNSS

Posted on Originally published at gnss-solutions.com AI-assisted

Dual-antenna GNSS heading receivers compared: which one for your robot, tractor or vessel?

If your machine needs to know which way it is facing, not just where it is, you need GNSS heading. A dual-antenna receiver measures the vector between two antennas and gives true heading at standstill: no magnetometer, no need to move first, and no interference from steel, motors or cabling.

At Eview we build five dual-antenna heading receivers, all powered by Septentrio modules. They share the same RTK accuracy and 0.15° heading at a 1 m antenna baseline, so the right choice depends on your platform: size, power, mounting, output rate and interfaces.

Quick answer: which model for which machine

Your platform Model (Septentrio module) Why
Compact robot, AGV or small machine with a tight power budget HB50H (mosaic-G5 P3H) 59 × 44 × 12 mm, 50 g, 0.60 W typical
System that needs a fallback when GNSS heading is unavailable HB51 (mosaic-G5 P3H + magnetometer) Adds a 3-axis magnetometer
Weight-critical integration HB52H (mosaic-G5) 48 × 35 × 12.6 mm, USB-C and microSD
Field robot, tractor or implement needing rugged mounting and logging HB56H (mosaic-H) Flange mount, SD/MMC logging, raw data up to 100 Hz
Boat, USV or fast vehicle with 100 Hz control loops HB10 (AsteRx-m3 Pro+) 100 Hz output, under 10 ms latency

Full comparison

HB50H HB51 HB52H HB56H HB10
Septentrio module mosaic-G5 P3H mosaic-G5 P3H + magnetometer mosaic-G5 mosaic-H AsteRx-m3 Pro+
Heading / pitch-roll at 1 m 0.15° / 0.25° 0.15° / 0.25° 0.15° 0.15° / 0.25° 0.15° / 0.25°
Max. output rate 20 Hz 20 Hz 20 Hz 20 Hz (raw 100 Hz) 100 Hz
Interfaces 2 × UART, USB-C, SD/MMC 2 × UART, I2C, PPS, event, 2 × MMCX USB-C, microSD 2 × UART, Micro USB, SD/MMC, PPS, event 3 × UART, USB-C, microSD, xPPS, event
Size 59 × 44 × 12 mm, 50 g see product page 48 × 35 × 12.6 mm 76 × 69 × 13 mm, 60 g 71.8 × 20.5 × 12.5 mm

All five give RTK accuracy of 0.6 cm + 0.5 ppm horizontal and 1 cm + 1 ppm vertical (RMS). With a 5 m baseline, heading improves to 0.03° and pitch/roll to 0.05°.

Five questions to answer before you choose

1. How far apart can you mount the antennas? Heading accuracy scales with the baseline: 0.15° at 1 m, 0.03° at 5 m. On a small robot 0.5–1 m is typical; on a tractor or boat 1.5–3 m. Use the longest rigid separation the platform allows.

2. How fast does the machine move and turn? Robots, tractors and implements are well served by 20 Hz. For boats, USVs and fast vehicles, 100 Hz output with low latency makes a measurable difference.

3. What does your controller read? All models output NMEA 0183 (including heading), accept RTCM 3 corrections and support Septentrio SBF. Count the serial ports you need.

4. Do you need to log raw data? On-board logging saves a laptop on every field test. The HB56H and HB50H log to SD/MMC; the HB52H and HB10 to microSD.

5. How will it be mounted? The HB56H has mounting ears for bolting to a frame; the others are designed to sit inside an enclosure.

FAQ

Do I need RTK corrections for heading? No. Heading comes from the two antennas and works without corrections. Corrections (NTRIP or your own base) are needed for centimetre-level position.

Can a single-antenna receiver give heading? Only from movement (course over ground), so not at standstill and noisy at low speed.


Disclosure: I work at Eview GNSS. Written with AI assistance. Originally published on gnss-solutions.com, where you'll find links to each model and the datasheets.

Top comments (0)