DEV Community

Cover image for The C Roguelike Tutorial - Part 4: Field of View
Ignacio Oyarzabal
Ignacio Oyarzabal

Posted on

The C Roguelike Tutorial - Part 4: Field of View

It's not much of an adventure if you can't get surprised by hidden goblins and sudden encounters with big angry trolls. Right now the player can see everything in the dungeon. In this part of the tutorial we'll add an algorithm which will give the player a limited field of view, so that he has to walk around in order to discover the dungeon around him. Before we go ahead with that, however, we will add color to our game so that we can differentiate what we are currently seeing from what we have seen in the past.

Adding color

When we use ncurses, color is not enabled by default, it only uses black and white. In order to use color we need to use a function from ncurses which initializes the color scheme mode. Before we do that, we will use another function that verifies whether the current terminal that is running the application actually supports colors. If it returns true we will proceed to initialize the color mode, if it returns false, we will give the player an appropriate message informing him that his terminal does not support colors and we will close the game.

Once color is initialized, ncurses provides 8 different predefined colors which we can use. Colors are not used individually in ncurses, they must be used in pairs. A background color and a foreground color go together to make up a color pair that you can give to the different parts in your game. I will show you how to initialize a color pair with the default colors provided by ncurses. Ncurses also allows you to define your own colors in case you need more than the eight default ones, but we will stick to the basic eight colors for this tutorial. If you want more colors you will have to look into the ncurses documentation. Be aware that if you decide to use more than the eight basic colors not all terminals will be able to display them. While the linux terminal emulators usually support 256 colors, I've found that the windows Command Line only supports 8.

To initialize color pairs, ncurses takes an int which defines each pair. In order to use more appropriate names for each color first we will define a set of constants in our header file. Add the following lines to our rogue.h:

#include <ncurses.h>
#include <stdlib.h>
#include <time.h>
+
+// color pairs
+#define VISIBLE_COLOR 1
+#define SEEN_COLOR 2

typedef struct
...
Enter fullscreen mode Exit fullscreen mode

Here we are defining a constant for each of the color pairs we will use in this part of the tutorial. We will use these constants when we initialize our color pairs to avoid having to use non-descriptive numbers every time we want to use the color pairs.

Next we will add the initialization code to our engine.c file, making our cursesSetup() function look like this:

void cursesSetup(void)
{ 
  initscr();
  noecho();
  curs_set(0);

  if (has_colors())
  {
    start_color();

    init_pair(VISIBLE_COLOR, COLOR_WHITE, COLOR_BLACK);
    init_pair(SEEN_COLOR, COLOR_BLUE, COLOR_BLACK);
  }
}
Enter fullscreen mode Exit fullscreen mode

In the first new line if (has_colors()) checks whether the terminal supports colors. If it does, we initialize ncurse's color system with start_color(). Finally, we initialize two color pairs:

    init_pair(VISIBLE_COLOR, COLOR_WHITE, COLOR_BLACK);
    init_pair(SEEN_COLOR, COLOR_BLUE, COLOR_BLACK);
Enter fullscreen mode Exit fullscreen mode

The ncurses init_pair() function takes an int as a first parameter to identify the new color pair. The second parameter is the foreground color and the third is the background color. The uppercase constants that we have passed for these parameters are some of the color constants defined by ncurses. We have now established that our VISIBLE_COLOR will have a white font color on a black background and our SEEN_COLOR will have a blue font color on a black background. Since we don't have gray in our predefined ncurses colors we'll use blue, which will substitute nicely to make up the parts of the dungeon which we have already seen but which are plunged into shadow once the player moves on.

Now that the colors are initialized we can use them with a function called COLOR_PAIR() which takes as argument one of our predefined color numbers such as VISIBLE_COLOR and returns an int that we can use to modify ASCII characters when we print them to the ncurses screen. In order to assign each map tile and each entity a color, we'll add an int color variable to our Tile and Entity structs in our rogue.h file, like so:

typedef struct
{
  char ch;
+  int color;
  bool walkable;
} Tile;

typedef struct
{
  ...
} Room;

typedef struct
{
  Position pos;
  char ch;
+  int color;
} Entity;
Enter fullscreen mode Exit fullscreen mode

Now that our structs are set up to include a color variable, we need to modify a few functions. Open map.c and add the following line to our createMapTiles() function:

Tile** createMapTiles(void)
{
  Tile** tiles = calloc(MAP_HEIGHT, sizeof(Tile*));

  for (int y = 0; y < MAP_HEIGHT; y++)
  {
    tiles[y] = calloc(MAP_WIDTH, sizeof(Tile));
    for (int x = 0; x < MAP_WIDTH; x++)
    {
      tiles[y][x].ch = '#';
+      tiles[y][x].color = COLOR_PAIR(VISIBLE_COLOR);
      tiles[y][x].walkable = false;
    }
  }

  return tiles;
}
Enter fullscreen mode Exit fullscreen mode

And open the player.c file and modify the createPlayer() function with the following:

Entity* createPlayer(Position start_pos)
{
  Entity* newPlayer = calloc(1, sizeof(Entity));

  newPlayer->pos.y = start_pos.y;
  newPlayer->pos.x = start_pos.x;
  newPlayer->ch = '@';
+  newPlayer->color = COLOR_PAIR(VISIBLE_COLOR);

  return newPlayer;
}
Enter fullscreen mode Exit fullscreen mode

Now that our struct variables have a color assigned we have to modify some code to use their colors when we draw them on the screen. In order to use the color pairs, we will use the bitwise OR operator | to modify each struct's char variable. Open our draw.c file and change the lines like this:

void drawMap(void)
{
  for (int y = 0; y < MAP_HEIGHT; y++)
  {
    for (int x = 0; x < MAP_WIDTH; x++)
    {
-      mvaddch(y, x, map[y][x].ch);
+      mvaddch(y, x, map[y][x].ch | map[y][x].color);
    }
  }
}

void drawEntity(Entity* entity)
{   
-  mvaddch(entity->pos.y, entity->pos.x, entity->ch);
+  mvaddch(entity->pos.y, entity->pos.x, entity->ch | entity->color);
}
Enter fullscreen mode Exit fullscreen mode

What we are adding to the ch variables is a bitwise OR operation. The bitwise OR is an operation that compares the binary of each side of the operation and returns a binary that will retain 1s whenever one or both of those sides have a 1, or will return a 0 otherwise. In this case the OR operation is returning an int that represents the same character as before but with a modified color scheme.

If we run our code now, it should do exactly the same as it did before, with no change. And now we can move on to implementing a field of vision for our player where we will use our SEEN_COLOR and actually put our color scheme to use.

Field of Vision

We will now create a new file where we will write all of the code needed to use a field of vision for our player that will only allow us to see up to a certain range. We will code two functions that will be used by other c modules in our game, those will be makeFOV() and clearFOV(). makeFOV() will make the appropriate calculations and modify the Tiles around the player accordingly so that the game shows them on the screen. 'clearFOV()' will make sure that every time we move we clear all of the tiles which we had previously seen, so that the next time makeFOV() is called everything is cleared and we don't get a trail of light left behind us as we move. makeFOV() will make use of several other functions in this file, the most complicated of which is lineOfSight() which is the function that will make sure that our player can't see through walls. This function is used by implementing the simplest algorithm for line of sight I could find. It is a just an adaptation of this algorithm by Steve Register.

Before we start programming the algorithms for field of view we need to add three new boolean variables to our Tile struct in our rogue.h file, like so:

...
typedef struct
{
  char ch;
  int color;
  bool walkable;
+  bool transparent;
+  bool visible;
+  bool seen;
} Tile;
...
Enter fullscreen mode Exit fullscreen mode

The transparent boolean will be used by our lineOfSight() function to determine which parts of the map the player can see through, while the visible and seen will be used by makeFOV() and clearFOV() as they go about modifying the map to fit what the player can actually see.

Go ahead and create a file called fov.c and add the following code to it:

#include "rogue.h"

void makeFOV(Entity* player)
{ 
  int y, x, distance;
  int RADIUS = 15;
  Position target;

  map[player->pos.y][player->pos.x].visible = true;
  map[player->pos.y][player->pos.x].seen = true;

  for (y = player->pos.y - RADIUS; y < player->pos.y + RADIUS; y++)
  { 
    for (x = player->pos.x - RADIUS; x < player->pos.x + RADIUS; x++)
    { 
      target.y = y;
      target.x = x;
      distance = getDistance(player->pos, target);

      if (distance < RADIUS)
      { 
        if (isInMap(y, x) && lineOfSight(player->pos, target))
        { 
          map[y][x].visible = true;
          map[y][x].seen = true;
        } 
      } 
    } 
  } 
} 
Enter fullscreen mode Exit fullscreen mode

The makeFOV() function returns void and takes a single Entity* as an argument.

  int y, x, distance;
  int RADIUS = 15;
  Position target;
Enter fullscreen mode Exit fullscreen mode

Here we define the variables that we will use for this function. y and x will be iterated according to the RADIUS variable in order to get a square field that extends as many tiles as the RADIUS function to all sides of the player. We are hardcoding a RADIUS for now but we will later add a radius variable to the player and take the radius from there. The Position target will be used to send the y and x coordinates to our getDistance() function.

  map[player->pos.y][player->pos.x].visible = true;
  map[player->pos.y][player->pos.x].seen = true;
Enter fullscreen mode Exit fullscreen mode

Here we are simply assigning true to the position in the map that the player is standing on, since he will always be able to see at least where he stands. Making a tile visible will allow our drawMap() function to draw the tile and anything on it, but we also set seen to true, so that when we move away from that position we can switch the visible variable to false, and our drawMap() function will then check if the position is seen and draw it in blue so that the player remembers where he's been, even if he can't see it at the moment.

Next, we enter the loop:

  for (y = player->pos.y - RADIUS; y < player->pos.y + RADIUS; y++)
  { 
    for (x = player->pos.x - RADIUS; x < player->pos.x + RADIUS; x++)
    {
Enter fullscreen mode Exit fullscreen mode

As I mentioned previously, the loop iterates y and x to go through all of the coordinates around the player by as much as the RADIUS variable.

      target.y = y;
      target.x = x;
      distance = getDistance(player->pos, target);
Enter fullscreen mode Exit fullscreen mode

Inside the loop first we assign the y and x variables to the target variable and use that to call the getDistance() function, which we will code shortly, and assign it's return value to distance. getDistance() will return the distance from the player's position to the target position coordinate that the loop is iterating through at the moment.

      if (distance < RADIUS)
      { 
        if (isInMap(y, x) && lineOfSight(player->pos, target))
        { 
          map[y][x].visible = true;
          map[y][x].seen = true;
        } 
Enter fullscreen mode Exit fullscreen mode

Finally, we check whether the distance from the player to the target is shorter than the RADIUS. Performing this check allows us to make the FOV of the player a pseudo-circular area around him, instead of a sharp square. If the distance is shorter than the RADIUS, then we proceed with the final check to verify if the player can actually see the given location.

In the final if statement, we first verify if the y-x coordinate is inside our map with the isInMap() function, this will prevent us from crashing the game by going out of bounds in the map array. If, and only if, this function returns true, then the call to lineOfSight(player->pos, target) is made, and, if that also returns true, we switch the appropriate map Tile's visible and seen variables to true.

Now add the following function to the same fov.c file:

...
void clearFOV(Entity* player)
{ 
  int y, x;
  int RADIUS = 15;

  for (y = player->pos.y - RADIUS; y < player->pos.y + RADIUS; y++)
  { 
    for (x = player->pos.x - RADIUS; x < player->pos.x + RADIUS; x++)
    {
      if (isInMap(y, x))
        map[y][x].visible = false;
    }
  } 
} 
Enter fullscreen mode Exit fullscreen mode

In this function we are again iterating through the section of map around the player just like in the makeFOV() function, except in this case we are simply turning every single Tile's visible variable to false, in order to clear the map and allow for a fresh run of the makeFOV() function. We use the isInMap() function again to avoid going out of bounds of the map array.

Next, we will start adding our helper functions that we used in these functions. Append the following code below the clearFOV() function:

...
int getDistance(Position origin, Position target)
{ 
  double dy, dx;
  int distance;
  dx = target.x - origin.x;
  dy = target.y - origin.y;
  distance = floor(sqrt((dx * dx) + (dy * dy)));

  return distance;
}

bool isInMap(int y, int x)
{ 
  if ((0 < y && y < MAP_HEIGHT - 1) && (0 < x && x < MAP_WIDTH - 1))
  { 
    return true;
  }

  return false;
}
Enter fullscreen mode Exit fullscreen mode

The getDistance() function simply calculates the distance between two points using the hypotenuse formula. It uses floor() and sqrt() functions which are defined in the math.h header. We will have to add this header to our rogue.h file before compiling.

The isInMap() function checks whether the y and x parameters are in the correct range, keeping a padding of 1 both at the beginning and end of the range. It returns true if the respective ints are within the range of the map array or false otherwise.

Next we will add the most complicated of the helper functions, this function will do the brunt of the calculations. The algorithm is not entirely efficient and if you were making a more complicated game with higher graphical requirements this algorithm would likely slow your game down. As it is, our game will be perfectly fine with this algorithm and due to its relative simplicity it serves the purpose of this tutorial nicely.

Add the following code to the bottom of our fov.c file:

...
bool lineOfSight(Position origin, Position target)
{
  int t, x, y, abs_delta_x, abs_delta_y, sign_x, sign_y, delta_x, delta_y;

  delta_x = origin.x - target.x;
  delta_y = origin.y - target.y;

  abs_delta_x = abs(delta_x);
  abs_delta_y = abs(delta_y);

  sign_x = getSign(delta_x);
  sign_y = getSign(delta_y);

  x = target.x;
  y = target.y;

  if (abs_delta_x > abs_delta_y)
  {
    t = abs_delta_y * 2 - abs_delta_x;

    do
    {
      if (t >= 0)
      {
        y += sign_y;
        t -= abs_delta_x * 2;
      }

      x += sign_x;
      t += abs_delta_y * 2;

      if (x == origin.x && y == origin.y)
      {
        return true;
      }
    }
    while (map[y][x].transparent);

    return false;
  }
  else
  {
    t = abs_delta_x * 2 - abs_delta_y;

    do
    {
      if (t >= 0)
      {
        x += sign_x;
        t -= abs_delta_y * 2;
      }

      y += sign_y;
      t += abs_delta_x * 2;

      if (x == origin.x && y == origin.y)
      {
        return true;
      }
    }
    while (map[y][x].transparent);

    return false;
  }
}

int getSign(int a)
{
  return (a < 0) ? -1 : 1;
}
Enter fullscreen mode Exit fullscreen mode

The lineOfSight() function takes two Position arguments, an origin and a target and returns a boolean. It will return true if the origin is in line of sight of the target. Using the transparent variable of the Tiles in our map, the function goes through all of the Tiles that make the shortest line from the origin to the target, if it can go through the whole line without encountering a Tile that has a transparent value of false, it returns true, and it returns false otherwise. I won't analyze this function line per line as it is quite long and complex, but you can take a look at the original documented code by Steve Register here if you want to get a better explanation of how the algorithm works.

The getSign() function simply returns a 1 or a -1 depending on the sign of the int provided. This function is used in lineOfSight() as a helper function.

Now all we need to do to use our new field of view functions is make a few small changes in our code. First, we need to initialize all of the new boolean variables we added to our tiles. Open our map.c file and add the following lines to the createMapTiles() function:

Tile** createMapTiles(void)
{
  Tile** tiles = calloc(MAP_HEIGHT, sizeof(Tile*));

  for (int y = 0; y < MAP_HEIGHT; y++)
  {
    tiles[y] = calloc(MAP_WIDTH, sizeof(Tile));
    for (int x = 0; x < MAP_WIDTH; x++)
    {
      tiles[y][x].ch = '#';
      tiles[y][x].color = COLOR_PAIR(VISIBLE_COLOR);
      tiles[y][x].walkable = false;
+      tiles[y][x].transparent = false;
+      tiles[y][x].visible = false;
+      tiles[y][x].seen = false;
    }
  }

  return tiles;
}
Enter fullscreen mode Exit fullscreen mode

Since we initialize all of our Tiles to be walls, we assign their transparent variable to be false, as well as the other two.

Now open the room.c file and modify the addRoomToMap() and the connectRoomCenters() functions to use the new transparent variable:

void addRoomToMap(Room room)
{
  for (int y = room.pos.y; y < room.pos.y + room.height; y++)
  {
    for (int x = room.pos.x; x < room.pos.x + room.width; x++)
    {
      map[y][x].ch = '.';
      map[y][x].walkable = true;
+      map[y][x].transparent = true;
    }
  }
}

void connectRoomCenters(Position centerOne, Position centerTwo)
{
  Position temp;
  temp.x = centerOne.x;
  temp.y = centerOne.y;

  while (true)
  {
    if (abs((temp.x - 1) - centerTwo.x) < abs(temp.x - centerTwo.x))
      temp.x--;
    else if (abs((temp.x + 1) - centerTwo.x) < abs(temp.x - centerTwo.x))
      temp.x++;
    else if (abs((temp.y + 1) - centerTwo.y) < abs(temp.y - centerTwo.y))
      temp.y++;
    else if (abs((temp.y - 1) - centerTwo.y) < abs(temp.y - centerTwo.y))
      temp.y--;
    else
      break;

    map[temp.y][temp.x].ch = '.';
    map[temp.y][temp.x].walkable = true;
+    map[temp.y][temp.x].transparent = true;
  }
}
Enter fullscreen mode Exit fullscreen mode

With these simple additions our map is ready to use the field of vision functions. Let's add our functions to our rogue.h file and also add a new include for the math functions:

#ifndef ROGUE_H
#define ROGUE_H

#include <ncurses.h>
#include <stdlib.h>
#include <time.h>
#include <math.h>

...

// room.c functions
Room createRoom(int y, int x, int height, int width);
void addRoomToMap(Room room);
void connectRoomCenters(Position centerOne, Position centerTwo);
+
+// fov.c functions
+void makeFOV(Entity* player);
+void clearFOV(Entity* player);
+int getDistance(Position origin, Position target);
+bool isInMap(int y, int x);
+bool lineOfSight(Position origin, Position target);
+int getSign(int a);

...
Enter fullscreen mode Exit fullscreen mode

Now we just need to use our makeFOV() and clearFOV() functions in the right place for it to work. First, we will add a call to makeFOV() at the start of the game, right before the loop begins. Open engine.c and add the following line:

...
void gameLoop(void)
{
  int ch;
+    
+  makeFOV(player);
  drawEverything();

  while(ch = getch())
  {
    if (ch == 'q')
    {
      break;
    }

    handleInput(ch);
    drawEverything();
  }
}

...
Enter fullscreen mode Exit fullscreen mode

This line will create the field of view for the first time right before the map is drawn.

Now open the player.c file and modify the movePlayer() function like this:

...
void movePlayer(Position newPos)
{
  if (map[newPos.y][newPos.x].walkable)
  {   
+    clearFOV(player);
    player->pos.y = newPos.y;
    player->pos.x = newPos.x;
+    makeFOV(player);
  }
}
Enter fullscreen mode Exit fullscreen mode

In this way, we are clearing the field of view before we actually make a move, and then we are remaking the field of view once we have performed the player's move.

Finally, we need to modify our draw function. Open draw.c file and modify our drawMap() function like this:

...

void drawMap(void)
{
  for (int y = 0; y < MAP_HEIGHT; y++)
  {
    for (int x = 0; x < MAP_WIDTH; x++)
    {
-      mvaddch(y, x, map[y][x].ch | map[y][x].color);
+      if (map[y][x].visible)
+      {
+        mvaddch(y, x, map[y][x].ch | map[y][x].color);
+      }
+      else if (map[y][x].seen)
+      {
+        mvaddch(y, x, map[y][x].ch | COLOR_PAIR(SEEN_COLOR));
+      }
+      else
+      {
+        mvaddch(y, x, ' ');
+      }
    }
  }
}

...
Enter fullscreen mode Exit fullscreen mode

In the first if block, we check if the position is visible to the player and draw the Tile using it's own color if it is. If the position is not visible, but it has been seen, the second block will draw the Tile using the darker SEEN_COLOR. Finally, if the position is neither visible nor seen, the last block will draw an empty space. If we did not do this, the previous drawings would remain.

Now all of the source code is ready, but before we try to compile the program again, we need to add a new flag in our makefile so that the compiler knows to link the math.h header file properly when compiling. Open the makefile and add the following:

CC = gcc
-CFLAGS = -lncurses -I./include/
+CFLAGS = -lncurses -lm -I./include/
SOURCES = ./src/*.c

...
Enter fullscreen mode Exit fullscreen mode

Now we can finally compile our game again. It should now show you only the nearest parts of the dungeon to the player. If you move around you will see how the shadows move around with the player and the light is stopped by the walls of the dungeon.

Congratulations! We now have a game where we can discover things instead of being shown everything at once!

The only issue now is that if you run the game in a terminal which doesn't support colors, the game will crash when it tries to use colors. Therefore we need to add some logic to our code that will prevent the game from running if it doesn't find color support and inform the user that he should try running the game in a color-compatible terminal.

First we'll modify our cursesSetup() function to return a boolean. It will return true if it managed to initialize colors, and false otherwise. Open engine.c and make the following modifications:

...
-void cursesSetup(void)
+bool cursesSetup(void)
{
  initscr();
  noecho();
  curs_set(0);

  if (has_colors())
  {
    start_color();

    init_pair(VISIBLE_COLOR, COLOR_WHITE, COLOR_BLACK);
    init_pair(SEEN_COLOR, COLOR_BLUE, COLOR_BLACK);
+
+    return true;
  }
+  else
+  {
+    mvprintw(20, 50, "Your system doesn't support color. Can't start game!");
+    getch();
+    return false;
+  }
}

...
Enter fullscreen mode Exit fullscreen mode

This new code will return true if the colors are initialized. If they are not, it will print a message to the user informing him of the issue, wait for the user to press any key and then return false.

Modify the function declaration in our rogue.h file:

...
//engine.c functions
-void cursesSetup(void);
+bool cursesSetup(void);
void gameLoop(void);
void closeGame(void);
...
Enter fullscreen mode Exit fullscreen mode

Now we need to modify our main.c file to use the boolean value returned by cursesSetup(). Modify the main() function to look like this:

...
int main(void)
{
  Position start_pos;
  bool compatibleTerminal;

  compatibleTerminal = cursesSetup();

  if (compatibleTerminal)
  {
    srand(time(NULL));

    map = createMapTiles();
    start_pos = setupMap();
    player = createPlayer(start_pos);

    gameLoop();

    closeGame();
  }
  else
  {
    endwin();
  }

  return 0;
}
Enter fullscreen mode Exit fullscreen mode

With this in place any errors due to color compatibility will be dealt with smoothly, warning the player of the issue.

That's all for this part of the tutorial. If you want to look at the full code up to this part, you can download it here!

In the next part of this tutorial we'll be looking into adding monsters to our dungeon!

Top comments (6)

Collapse
 
connorjbryant profile image
Connor Bryant

This is a great tutorial series! I have a question, do you know how to reduce screen flickering in the program? Everytime I move the character the screen flickers.

Collapse
 
ignaoya profile image
Ignacio Oyarzabal

Hi Connor! I haven't experienced any flicker myself, it always runs smoothly. Perhaps it has to do with the environment you are running it. What OS, and terminal are you using? If you are using Linux, maybe try a different terminal emulator, and make sure to play it with the terminal window maximized, if the window is too small for the size of the map that can cause visual glitches.

Collapse
 
connorjbryant profile image
Connor Bryant

I use the Windows OS and installed Windows Subsystem for Linux to run ncurses on my computer. I might try and use a different terminal emulator and see if that helps. Thanks for your help! By the way, you should consider making more parts to the series like adding monsters or something, that would be awesome.

Collapse
 
liandrapereira profile image
Liandra Pereira

Where would you add the monsters?

please respond

Collapse
 
kevdev444 profile image
KevDev444

Where is part 6?

Collapse
 
sn33ds profile image
SN33DS

This is great ! Do you ever intend to finish the series ?