DEV Community

Cover image for I Built a Browser-Based 3D Dinosaur Anatomy Simulator That Lets You See Organs and Bones
Julian Neagu
Julian Neagu

Posted on Originally published at visionvix.com

I Built a Browser-Based 3D Dinosaur Anatomy Simulator That Lets You See Organs and Bones

TL;DR: Books show one side of a skeleton. Museums let you walk around bones but can't reveal where the organs sat. A browser-based 3D simulator lets you spin ten prehistoric animals, peel back the skin to see labeled organs, strip down to fossil bones, and hear science-based sound reconstructions - no download, no sign-up, just open and explore.

Dinosaur books are flat. You see the left side of a T. rex skeleton on page twelve, maybe a labeled diagram of the skull on page fourteen, and that's it. Turn the page and the dinosaur is gone.

Museums are better: you can walk around a real fossil, crouch under the ribcage, study the teeth up close. But even a museum skeleton leaves gaps. Where did the heart sit? How big were the lungs? What filled the space between the bones?

I built the VisionVix World 3D Dinosaur Anatomy simulator to close that gap. It puts ten prehistoric animals on your screen as interactive 3D models you can rotate with a finger or a mouse, switch between three anatomy layers, and hear reconstructed calls based on real paleontology research. It runs in any modern browser on a laptop, tablet, or phone. No installation, no account, nothing to download.

A laptop showing the 3D Dinosaur Anatomy simulator with a T. rex in the Inside view, labels for the brain, heart, lungs and intestines, and the list of ten dinosaurs on the right

This article walks through what the simulator is, how every part of it works, the technical decisions behind it, and what it still can't do. I built it, so I'll tell you plainly where it succeeds and where it falls short.

What the 3D Dinosaur Anatomy simulator is

The simulator features ten prehistoric animals: T. rex, Velociraptor, Spinosaurus, Triceratops, Stegosaurus, Brachiosaurus, Ankylosaurus, Parasaurolophus, Pteranodon, and Plesiosaurus.

Two are not technically dinosaurs: Pteranodon was a flying reptile, and Plesiosaurus was a marine reptile. Both lived during the Mesozoic Era, and their cards clearly explain the difference.

A laptop showing the 3D Dinosaur Anatomy simulator with a T. rex in the Inside view, labels for the brain, heart, lungs and intestines, and the list of ten dinosaurs on the right

Each animal exists in three aligned layers:

  • Full body. The animal as paleontologists reconstruct it today, with skin texture, horns, plates, crests, and color patterns based on fossil evidence and related species.
  • Inside. One side of the skin peeled away to reveal the organs. Labels point to the brain, heart, lungs, stomach, intestines, liver, and other internal structures. Tap a label and a note explains what that organ does.
  • Fossil skeleton. The bones alone, matching what you'd see mounted in a museum hall.

The three layers line up spatially. Switching from full body to inside doesn't load a different model at a different angle; it removes the skin from the same position.

The three anatomy layers line up spatially, so switching from full body to inside to skeleton feels like peeling the same animal, not loading three separate images.

How books, museum skeletons, and 3D simulators compare

Each learning method has strengths and limits. Here's what each one does well and where it breaks down:

Learning method You can See the organs? See the bones? Who sets the pace? Needs
Book or poster Look at one side Sometimes, as a drawing Drawn You The book
Museum skeleton Walk around it No Yes, the real thing The museum A trip
3D simulator Spin, zoom, peel, and listen Yes, with labels Yes, in 3D You A browser with 3D graphics

Step-by-step walkthrough of every feature

1. Open the simulator and pick a dinosaur

The simulator on a phone: a T. rex in the Full body view, and the same T. rex in the Inside view with organ labels, with the layer tabs along the top

Navigate to VisionVix World and press Enter Simulator on the 3D Dinosaur Anatomy card, or open the direct link. The ten animals appear in a list on the right side of the screen. Tap one and it loads onto a glowing podium in the center. A fact card slides in with the animal's name, pronunciation, diet, period, and a two-sentence description.

The Choose Your 3D World Simulator page with cards for 3D Human Anatomy, 3D Animal Anatomy, 3D Dinosaur Anatomy and 3D Plant Anatomy, each with an Enter Simulator button

visionvix.world on a phone: the landing page with the Open Simulators button, and the list of simulators with the 3D Dinosaur Anatomy card

2. Pick a dinosaur

On desktop, drag the model to rotate it. On a phone or tablet, swipe. Scroll or pinch to zoom. The camera always zooms toward the center of the animal and keeps the horizon level, so you never lose the podium or drift into an awkward upside-down view.

A T. rex in the Full body view on a glowing podium, with Quick Explore and Anatomy Layers on the left, the list of ten dinosaurs on the right and an info card with a Hear the T. rex button

The Quick Explore filter on the left narrows the list to Meat-eaters, Plant-eaters, or Sky and sea. Press Play Animation and the model spins slowly on its own, useful for presentations or just watching.

3. Switch to the inside layer and explore the organs

Switch on Inside in Anatomy Layers, or press Next layer. The skin peels back on one side, and labels appear on the organs. Tap a label and a note explains what that part does. The Labels button at the bottom hides them all when you just want to look.

The T. rex Inside view with the skin peeled back and labels for the brain, heart, lungs and intestines, with the heart label selected and its note shown below

4. Strip down to the fossil skeleton

The fossil skeleton shows the bones on their own. It is the best view for comparing animals: the long neck bones of Brachiosaurus, the heavy skull of T. rex, or the armour of Ankylosaurus.

The T. rex fossil skeleton in 3D on the podium, with Fossil skeleton switched on in Anatomy Layers

On a phone, the layers sit as one row of tabs under the header, as in the phone pictures above, and the dinosaur list opens from the bottom bar.

5. Hear the reconstructed calls

Every animal has a Hear it button on its card and a small speaker icon at the top of the screen. Press it and the model shakes slightly while a sound plays. Some animals have multiple calls, so pressing it cycles to the next one again.

Parasaurolophus in the Full body view with its info card showing a Hear the Parasaurolophus button and a note on how scientists modelled its crest

Nobody has recorded a living dinosaur, so these sounds are educated guesses. A 2016 study led by the University of Texas found that many large relatives of dinosaurs, including cassowaries and crocodiles, produce calls with their mouths closed, creating low booms and coos that travel long distances.

Large dinosaurs likely did the same. In 1997, a team at Sandia National Laboratories scanned a Parasaurolophus crest, modeled its internal nasal passages, and played air through the digital reconstruction. The result was a low, rumbling tone around 30 Hz, similar to a foghorn.

A 1997 Sandia National Laboratories study scanned a Parasaurolophus crest and played air through a digital model of its nasal passages, producing a low rumbling tone around 30 Hz.

Each dinosaur has a reconstructed sound based on scientific research and modern animal calls. For example, T. rex has a deep bellow inspired by crocodiles, while Pteranodon has a high screech inspired by herons and pelicans.

The full research and explanation behind all ten sounds are available on the simulator's sound research page.

6. Filter by sky and sea

The Sky and sea filter in Quick Explore isolates Pteranodon and Plesiosaurus, the two animals that were not dinosaurs. Pteranodon flew with wings made of skin stretched between elongated finger bones, and Plesiosaurus swam with four flippers. Filtering to this pair is useful for teaching the difference between dinosaurs and other Mesozoic reptiles.

The Sky and sea filter selected, with Pteranodon on the podium and only Pteranodon and Plesiosaurus in the list

7. Switch between dark mode and white mode

The button at the top right toggles between a dark green theme and a bright white one. The white mode works better in classrooms with projectors or overhead lights. The dark mode reduces eye strain during long sessions at home.

A Stegosaurus split down the middle: the left half in the dark green mode with a green podium, the right half in the bright white mode with a volcano and waterfalls behind

Next to the theme toggle, an HD / Lite switch controls model detail. The simulator automatically selects Lite on older phones or tablets and displays a small note explaining the switch. Lite models use compressed textures and reduced polygon counts to keep frame rates smooth. You can manually switch to HD at any time, but on a device that defaulted to Lite, HD models may stutter during rotation.

How I built the simulator and why it works on any device

The simulator uses Three.js for browser-based 3D graphics and supports desktop and mobile devices.

It offers two quality modes: HD for powerful devices and Lite for older devices, selected automatically based on GPU performance.

Organ labels follow camera movement and disappear when hidden. Dinosaur sounds play through the Web Audio API, with shaking animations powered by GSAP.

The What did dinosaurs sound like page on visionvix.world, with the T. rex row playing and buttons to see it in 3D or read its facts

All 3D models were created in Blender, exported as GLTF files, and compressed using gltf-pipeline. Each animal has three versions: full body, internal organs, and fossil skeleton.

The simulator is built as a single-page React app and hosted on Vercel. It loads around 8 MB of model data for the first animal and loads others only when selected. All three layers are preloaded, making transitions between them instant.

The simulator detects device performance on load and automatically switches between HD models for strong hardware and Lite models with compressed textures for older phones.

What the simulator does not do yet

The simulator has clear limits. Here's what it can't do right now and what I plan to add:

**No Muscle Layer: **The inside view shows organs but not muscles. A future layer will reveal how muscles support the jaw, neck, and body.

No Movement Animations: Animals can rotate but cannot walk, run, fly, or swim yet.

**No Injuries or Diseases: **Models show healthy anatomy, without healed fractures, bite marks, or other fossil evidence of injuries.

**Only Ten Animals: **More dinosaurs are planned, to expand the collection to 20–30 species.

No AR or VR: The simulator currently works on regular screens. Future WebXR support could bring dinosaurs into augmented or virtual reality.

For a broader look at how I approach interactive 3D projects, I covered the design principles behind spatial navigation in my earlier walkable 3D space article, and you can see the full range of simulators and demos on my YouTube channel.

Why I built this and who it's for

I built this simulator for curious kids who want to discover what's inside a T. rex, going beyond what books and drawings can show.

It's also designed for teachers, students, and dinosaur enthusiasts who want an interactive way to explore dinosaur anatomy and compare skeletons.

The simulator is completely free, with no sign-up, account, or installation required. Just open the link and explore.

Teachers and paleontology students are welcome to share feature suggestions or report anatomical errors through the website's contact link.

What dinosaur would you add to the simulator first, and what feature would make it more useful for you?

Top comments (1)

Collapse
 
alexshev profile image
Alex Shev •

The anatomy layers become more useful when they are tied to an explicit coordinate convention and an inspectable scene graph. I’d expose stable identifiers for each organ and bone plus a saved camera pose, so an educator can link a lesson or bug report to the same view across renderer upgrades. That turns a visual exploration tool into something reproducible.