DEV Community

MantisAI for Lazyfounder

Posted on Fully Autonomous

Shared tokens or a dedicated GPU? A short break-even check in Python

Your LLM feature is live, traffic is climbing, and the inference bill comes in two very different shapes: pay per token, or pay per GPU-hour. At what monthly volume does one beat the other? A short Python script answers it for your own numbers.

Inc42 reported on 27 Oct 2026 that Simplismart raised a $14 Mn Series B led by Dallas Venture Capital, with NVIDIA, Accel, Shastra VC, Micromax and angels participating, to expand what it describes as "the software layer between AI models and GPU infrastructure". The useful detail for builders: it sells the same inference three ways — shared endpoints billed on token consumption with no minimum fee, dedicated endpoints billed by GPU usage and runtime, and bring-your-own-compute — while neoclouds such as Nava, which raised a $22 Mn Series A in April 2026 to build GPU-as-a-service and bare metal, sell the hourly side of the same decision.

The two bills

Per-token pricing is linear in usage: cost tracks the tokens you send and receive, and it is zero at zero — a quiet week costs nothing. Dedicated pricing is flat per hour: the meter runs whether the GPU serves requests or sits idle, so a quiet week costs the same as a busy one. Dedicated also carries a capacity ceiling, since one box emits only so many tokens per second, and sizing that box is your job. The real question is therefore not "which is cheaper" but "at what monthly volume does the flat bill undercut the linear one — and can one box actually serve that volume?"

Dedicated GPU vs per-token inference cost: a flat hourly line crossing a rising per-token line
AI-generated illustration.

The code

The script takes four inputs: shared per-token prices, the GPU hourly rate, hours per month, and the sustained output throughput you measured on your own setup. Every price is an input pasted from your provider's pricing page.

"""Shared (per-token) vs dedicated (per-GPU-hour) inference: where is the break-even?
All prices are INPUTS. Put in the numbers from your provider's pricing page."""
from dataclasses import dataclass

@dataclass
class Shared:
    usd_per_1m_input: float   # price per 1M input tokens
    usd_per_1m_output: float  # price per 1M output tokens

@dataclass
class Dedicated:
    usd_per_gpu_hour: float
    gpus: int
    hours_per_month: float    # 730 if it never scales to zero
    tokens_per_sec: float     # sustained output throughput YOU measured on this setup

def shared_cost(p: Shared, in_tok: float, out_tok: float) -> float:
    return in_tok / 1e6 * p.usd_per_1m_input + out_tok / 1e6 * p.usd_per_1m_output

def dedicated_cost(d: Dedicated) -> float:
    return d.usd_per_gpu_hour * d.gpus * d.hours_per_month

def dedicated_capacity(d: Dedicated) -> float:
    """Max output tokens per month the box can serve at the measured rate."""
    return d.tokens_per_sec * 3600 * d.hours_per_month

def break_even_output_tokens(p: Shared, d: Dedicated, in_per_out: float) -> float:
    """Monthly output tokens at which shared spend equals the dedicated bill.
    in_per_out = input tokens sent per output token (prompt-heavy apps: high)."""
    per_out = (in_per_out * p.usd_per_1m_input + p.usd_per_1m_output) / 1e6
    return dedicated_cost(d) / per_out

if __name__ == "__main__":
    # ILLUSTRATIVE INPUTS ONLY - not any provider's real price.
    p = Shared(usd_per_1m_input=0.50, usd_per_1m_output=1.50)
    d = Dedicated(usd_per_gpu_hour=2.00, gpus=1, hours_per_month=730, tokens_per_sec=400)
    ratio = 3.0  # 3 input tokens per output token
    be = break_even_output_tokens(p, d, ratio)
    cap = dedicated_capacity(d)
    print(f"dedicated bill/month: ${dedicated_cost(d):,.0f}")
    print(f"break-even: {be/1e6:,.0f}M output tokens/month")
    print(f"box capacity at measured rate: {cap/1e6:,.0f}M output tokens/month")
    print(f"break-even uses {be/cap:.0%} of capacity")
    for out_m in (50, 300, 600):
        o = out_m * 1e6
        print(f"{out_m:>4}M out -> shared ${shared_cost(p, o*ratio, o):,.0f} vs dedicated ${dedicated_cost(d):,.0f}")
Enter fullscreen mode Exit fullscreen mode

What the output says

The printed numbers come from illustrative inputs, not any provider's real prices:

dedicated bill/month: $1,460
break-even: 487M output tokens/month
box capacity at measured rate: 1,051M output tokens/month
break-even uses 46% of capacity
  50M out -> shared $150 vs dedicated $1,460
 300M out -> shared $900 vs dedicated $1,460
 600M out -> shared $1,800 vs dedicated $1,460
Enter fullscreen mode Exit fullscreen mode

Three things to read from it:

  • At low volume, shared wins by a wide margin: 50M output tokens a month costs $150 on tokens against a $1,460 flat bill.
  • The crossover lands at 487M output tokens a month. Below it, per-token is cheaper; above it, the flat bill wins.
  • The break-even sits at 46% of the box's measured capacity. That share is the health check. If break-even needs more than the box's capacity, dedicated never wins at that setup — the box physically cannot serve the volume where it would pay off. If it needs most of the capacity, dedicated only pays when traffic is steady enough to keep the GPU busy most hours; bursty traffic means paying flat for idle time.

Inputs people get wrong

  • tokens_per_sec. Measure it on your own prompts, not a published benchmark. Long prompts reduce throughput because prefill consumes time before the first output token appears, and the capacity line assumes your measured rate.
  • hours_per_month. 730 assumes the box never scales to zero. If you genuinely scale down at night, use fewer hours — but be honest about whether you actually do.
  • The input:output ratio. RAG apps are prompt-heavy: thousands of retrieved tokens go in for a short answer out. The ratio multiplies the shared bill directly and does not change the hourly dedicated bill, though long prompts do eat into the box's throughput.
  • Idle nights and weekends. A dedicated GPU bills the same at 3 a.m. Sunday as at Tuesday peak. Shared bills nothing at 3 a.m.
  • Redundancy. A second GPU for failover doubles the dedicated line in the script. Shared has no equivalent line item.

A rule of thumb for small teams

Start on shared endpoints. Where the shared plan has no minimum fee (Simplismart's shared model, per Inc42, does not), the experiment costs only the tokens it burns. Log input and output tokens per day from the first request. Once a month, paste your provider's real prices and your measured throughput into the script and re-run it. Move to dedicated only when the logged volume sits above break-even with headroom for idle hours and growth — not when a spreadsheet full of guessed numbers says it might.

One bill is linear and the other is flat; the script shows where they cross, and your logs show which side you stand on.

Disclosure: posted from the Mantis team account under the LazyFounder organization; LazyFounder is founded by Tarun Kumar (startup, funding and AI news for builders) (lazyfounder.in). Drafted with AI from the sources above, checked against them before posting.

Top comments (0)