CSS technology was one of the biggest game-changers in web development. It allowed for more styling capabilities and freedom. As CSS grew, so did its complexity. CSS in retrospect is not challenging to write, but it can be tricky to implement.
The next phase in CSS was the development of libraries and frameworks. One of the most famous examples of CSS frameworks is Bootstrap.
Frameworks like Bootstrap have one major disadvantage. Due to increased growth and usage, they became too big and offer less control over their styles. Learning frameworks like Bootstrap has become increasingly challenging because developers have to learn hundreds of classes.
In this article, we will cover:
- What Tailwind CSS is.
- Different ways to install and configure Tailwind CSS.
- How to use utility-based classes over regular pre-written classes.
To follow along with this tutorial, a basic understanding of HTML and CSS is necessary. Any prior experience with a CSS framework is an added advantage.
What is Tailwind CSS
Tailwind is a CSS framework created by Adam Wathan. Unlike other frameworks, it does not come prebuilt with classes to add to the HTML tags. Instead, it uses a different approach. It brings a much lower level of control by using utility-based classes.
Installation
Let’s get right into it and install Tailwind CSS so we can discover more about it. There are two ways to install Tailwind CSS, depending on your use case.
Method 1: Using the CDN
Using a CDN is the most common way of using any CSS framework, and Tailwind CSS is no exception. We add the Tailwind CSS file from the CDN in form of a link in the HTML page’s head section.
First, create a HTML file and give it a name. We will name ours index.html. Then inside it, Write the boilerplate HTML code and add the CDN as shown below:
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="UTF-8" />
<meta name="viewport" content="width=device-width, initial-scale=1.0" />
<title>Section Tailwind Demo</title>
<link
href="https://unpkg.com/tailwindcss@^2/dist/tailwind.min.css"
rel="stylesheet"
/>
</head>
<body></body>
</html>
Great. We have Tailwind CSS installed in our project.
Note: Installing Tailwind CSS by using its CDN has a few drawbacks such as:
- You cannot add any third-party plugins.
- Since Tailwind CSS fetches files when the file loads, you cannot purge unused files.
- You cannot tinker with some configurations like the theme.
Method 2: Using npm
Using the npm method bestows the full experience of Tailwind CSS. It is a common installation method because most JavaScript frameworks use a similar approach. There are minimal differences in the installation process, depending on the framework’s architecture.
Let’s get started.
First, let’s create a directory where we will be working.
In your terminal, run:
mkdir section-tailwind-demo && cd section-tailwind-demo
npm init -y
Next, let’s install Tailwind CSS. We also need to install some other packages alongside it. We need PostCSS because Tailwind CSS relies on a preprocessor to bundle the CSS. Tailwind uses a PostCSS plugin called autoprefixer to transpile the CSS into vanilla CSS.
In the terminal run:
npm install tailwindcss@latest postcss@latest autoprefixer@latest
The command above will install all the dependencies we need. Next, we have to create a script to configure Tailwind CSS and PostCss. To generate the scripts, we make use of the tailwind cli utility provided by Tailwind CSS.
In the terminal run:
npx tailwind init -p
It will generate two files, tailwind.config.js and postcss.config.js. The tailwind.config.js looks like this:
module.exports = {
purge: [],
darkMode: false, // or 'media' or 'class'
theme: {
extend: {},
},
variants: {
extend: {},
},
plugins: [],
};
The postcss.config.js file should look like this:
module.exports = {
plugins: {
tailwindcss: {},
autoprefixer: {},
},
};
Now that we have successfully set up the environment, let’s setup Tailwind CSS in our project.
First, create two files — an HTML file called index.html and a stylesheet called style.css.
The HTML part can have the basic boilerplate syntax at the beginning of the article. In the CSS file, we need to inform autoprefixer that we will use Tailwind CSS.
We do this by importing the Tailwind CSS files, as shown below:
@tailwind base;
@tailwind components;
@tailwind utilities;
Finally, we need to build our Tailwind CSS, so in the terminal run:
npx tailwindcss-cli@latest build -o css/tailwind.css
This command will create a tailwind.css file in the CSS folder. The -o in the command stands for the output path, and we specified that our output file would be in the css/tailwind.css path.
Note: You do not need to have a CSS file to work with that command, it will still generate the Tailwind CSS file. You may, however, need the style.css file to add custom styles, write Tailwind CSS in that file, or mix Tailwind CSS with custom CSS.
A different way of processing the CSS is to do it in production by adding a script in the package.json. We will use the postcss cli to run the operation during build time.
To do this, let’s install PostCSS CLI.
Run this in the terminal:
npm install postcss-cli
Next, we add the build script in the package.json like this:
"scripts": {
"build": "postcss style.css -o css/tailwind.css"
}
Now, when you run npm run build it should compile the Tailwind CSS file into a CSS folder, as we wanted.
We then need to add our Tailwind CSS file to the HTML like we would a regular CSS file.
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="UTF-8" />
<meta name="viewport" content="width=device-width, initial-scale=1.0" />
<title>Document</title>
<link rel="stylesheet" href="css/tailwind.css" />
</head>
<body></body>
</html>
Like that, we have everything set up.
Working with utility classes
To show and explain how utility classes work, let’s create a button using Tailwind CSS. This will show how Tailwind CSS affects the HTML elements.
Within the Body tags in the HTML page, add:
<button>Section</button>
Let’s add some classes to our button because it looks plain. In Tailwind CSS, the color value ranges depending on the color intensity from 100 to 900. The utility class for the background is bg. To make our button’s background a faint shade of green, we add the class bg-green-100.
Next, let’s style the text in the button. For this, we use the utility class text. Color rules remain, hence to add text to the color, we add the class text-green-100.
Our button is looking good so now let’s add some padding. For padding, the syntax is quite straightforward. It’s the property, size, then the value.
This applies to all size and spacing properties, like margin, for example. To add padding on the bottom, it would be pb-8. These values range from 0 to 64. To see how ranges work in-depth, check the documentation.
In our example, our padding will be py-2 for the top and the bottom and px-6 for the left and right. Let’s add some margin on the top with my-20 and some on the left with mx-20.
Now, let’s make the button more rounded with the rounded utility. You can find a full list of border-radius utilities and all their classes in the documentation. We will use the border-radius of 0.5em, which corresponds to rounded-lg.
Finally, let’s add some hover magic to make the button more lively. To do so, we add the classes hover:hover:bg-green-600 and
hover:text-green-200.
With that, we have styled our button with no CSS at all. The critical thing to take away is how much control Tailwind CSS gives you over the styling and elements. To get the full code for the tutorial.
Our final code looks like this:
`<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="UTF-8" />
<meta name="viewport" content="width=device-width, initial-scale=1.0" />
<title>Section-Tailwind-Demo</title>
<link rel="stylesheet" href="css/tailwind.css" />
</head>
<body>
<button
type="button"
class="hover:bg-green-600 hover:text-green-200 bg-green-100 text-green-700 mx-20 my-20 px-6 py-2 rounded-lg"
>
Section
</button>
</body>
</html>`
Good Luck
Top comments (2)
I think you need to fix the formatting because some code is outside of code block and there are some strange spacing.
Yes . Thankful . I edited the article