DEV Community

Sean Killeen
Sean Killeen

Posted on • Originally published at seankilleen.com on

How To Automate AWS CloudFront Distribution Folder Changes When Deploying a Static Web Site

I was working on a project that deployed its UI, an Angular site, to an S3 bucket that was then placed behind CloudFront.

So that we had repeatable builds and weren’t overwriting code, every deployment went into a new folder in the S3 bucket.

The Challenge

When our code was deployed, we still needed to update the CloudFront distribution to point to the new location in order to pick up the latest files. Unlike, say, a Lambda deployment, AWS doesn’t allow you to specify a new folder for the CloudFront distribution as its own CLI command. You instead have to pull the entire configuration, modify it in a few ways, and then update the configuration.

The Ingredients

At our disposal in this case we had:

  • An OctopusDeploy instance
  • An Octopus Linux Worker with jq installed.
  • The AWS CLI with a profile we could make use of that had appropriate permissions

The approach outlined below should work for an environment that has a deployment worker that can run jq and a bash script or similar.

The Overall Approach

We need to:

  • Get the CloudFront distribution’s configuration, and save the JSON
  • Strip out the ETag (per Amazon’s docs)
  • Modify the configuration to make our intended updates
  • Save the new JSON
  • Update the configuration using that JSON

Danger! It’s really important that you understand the sequence above. CloudFront updates are full replacements, not additive. If you only supply the changed part of the configuration, the rest will be reset, which doesn’t sound like a fun time to me.

A Few Things I Tried That Didn’t Work

  • Using sed to do a regex find/replace : Prior to using jq, I attempted to use sed to accomplish the find/replace. I spent a long time looking into the right regex to use, only to discover that sed doesn’t easily support multi-line regex. I could have forced sed to do what I wanted, but it wouldn’t have been easily understandable to a fresh set of eyes.
  • Using Perl for a multi-line regex : I’ve never been great at Perl. This time was no exception.
  • Some incorrect approaches to jq : I hit a wall a few times understanding jq’s syntax but StackOverflow came to my rescue.

Thinking about this more deeply led me to jq when I realized I didn’t want to find/replace – I wanted to modify the structure of a JSON document. That’s the purpose of jq.

Walking Through the Script

Below is the solution I wound up with. Note that all the steps below are all a part of the same bash script; I’ve only broken them out here to walk through them.

A Few General Points to Understand

  • We escape the quotes using \.
  • We’re escaping them because we’re using " vs ' because my actual script uses references to variables, e.g. $myVariable, which needs double quotes in order to be interpolated. (…I think. My bash is rusty.)

Setting Up Our Variables

We use variable references that Octopus fills in here (I love their variable management, btw), but you can feel free to populate them however you’d like.

cloudfront_distribution_id=`get_octopusvariable "CloudfrontDistributionId"`
profile_name=`get_octopusvariable "AWSProfileName"`
region=`get_octopusvariable "AWSRegion"`
release_number=`get_octopusvariable "Octopus.Release.Number"`
cloudfront_s3_origin_id=`get_octopusvariable "CloudfrontS3OriginId"`

echo "Distribution ID: $cloudfront_distribution_id"
echo "Profile Name: $profile_name"
echo "Region: $region"
echo "Release Number: $release_number"
echo "Cloudfront S3 Origin ID: $cloudfront_s3_origin_id"

Enter fullscreen mode Exit fullscreen mode

Getting the Current Configuration

# Get the current distribution's config as a JSON file and output it 
# to a file.
aws cloudfront get-distribution-config --id $cloudfront_distribution_id --profile $profile_name --region $region > output.json

echo "----- ORIGINAL JSON -----"

cat output.json

Enter fullscreen mode Exit fullscreen mode

Filtering and Modifying the JSON With jq

We need to remove the ETag field and update the origin path in the JSON, and output that to an updated JSON file.

echo "----- RUNNING JQ -----"

# This takes the JSON file, removes the ETag field, selects the 
# appropriate distribution config item, and sets the origin path 
# to the S3 folder we expect. It then spits that config out to 
# its own file

cat output.json | jq "del(.ETag) | (.DistributionConfig.Origins.Items[] | select(.Id == \"$cloudfront_s3_origin_id\")).OriginPath = \"/$release_number\" | .DistributionConfig" > updated-config.json

echo "----- UPDATED JSON: -----"
cat updated-config.json

Enter fullscreen mode Exit fullscreen mode

Getting the ETag

Even though we’re removing the ETag, we still need to supply it to the update command, which is how AWS makes sure we’re not supplying conflicting changes. If the ETag has changed since we last pulled the configuration, our command will fail.

echo "----- GETTING ETAG VALUE FOR LATER USE -----"

# AWS CLI Requires us to specify the etag from this request, to make 
# sure nobody has made a change since we last pulled the config.
# This extracts the content of that tag. The -r parameter outputs
# the field as "raw" data, without quotes, which we want for our
# variable.
etag=`cat output.json | jq -r ".ETag"`
echo $etag

Enter fullscreen mode Exit fullscreen mode

Updating the CloudFront Distribution

I initially got stuck here on the ETag issue and then on passing in the JSON string. Upon reading further, I was relieved to know I could specify file:// and a path to the JSON rather than the long escaped text itself.

echo "----- CALLING TO UPDATE -----":
# Pass in the modified configuration file and the etag value to
# the cli command to update the distribution.
aws cloudfront update-distribution --id $cloudfront_distribution_id --profile $profile_name --region $region --if-match="$etag" --distribution-config file://updated-config.json

Enter fullscreen mode Exit fullscreen mode

That Ought to do it…

With this script in place in our build step and the variables populated correctly, the CloudFront distribution is updated to point to the S3 folder of our latest deployment.

…but, wait!

In this case, I mean that literally.

Our CloudFront distribution is updated, but the old files are still cached. We need to invalidate the cache, and in order to do that, we need to wait for the current deployment to complete.

So, I add the command below to wait on the deployment:

aws cloudfront wait distribution-deployed --id $cloudfront_distribution_id --profile $profile_name --region $region

Enter fullscreen mode Exit fullscreen mode

And then once that’s complete, we move on to the command to initiate the cache invalidation:

aws cloudfront create-invalidation --distribution-id $cloudfront_distribution_id --paths "/*" --profile $profile_name --region $region

Enter fullscreen mode Exit fullscreen mode

I could wait for that to complete as well, but in our case once it’s kicked off I have a high degree of confidence it will complete.

That’s a Wrap!

It was fun for me to dive into AWS, the AWS CLI, jq, and bash all at the same time to pull this off. And being on the other side of it feels good.

Do you have a different approach to accomplishing this? I’d love to hear about it – drop a line in the comments.

Top comments (0)