A few weeks ago I started writing articles again on DEV and I just recently had the opportunity to take it to the next step: writing an article for a programming magazine!
This is quite a challenge in a short period of time on a subject I do not fully master but it's also thrilling and challenging. So far it takes a lot of time but I am also learning a lot!
Hello, World! I'm jzombie, a passionate software developer with a knack for problem-solving and a love for open-source. I believe in the power of code to change the world and make our lives easier.
I made a project called speaker.app which uses a peer-in-the-middle as a type of WebRTC proxy virtual server so that connected participants don't have to rely on mesh networks.
It doesn't get a lot of usage but my main goals were:
Hello, World! I'm jzombie, a passionate software developer with a knack for problem-solving and a love for open-source. I believe in the power of code to change the world and make our lives easier.
It's interesting to note that Chromium uses ffmpeg internally for media transcoding in its web browser (WebRTC & related).
Someone said, "yeah, but you can't access it." Ironically, a few weeks later, his Electron app wouldn't install because of a "ffmpeg.dll not found" error.
He/him, developer, builder of things both tangible and abstract, practitioner of yoga and ukulele... All-around complicated monkey.
https://www.buymeacoffee.com/tobyplaystheuke
I write about various topics that I'm currently learning, be it front end, back end, cloud, DevOps, etc., you name it!
For any questions you may have, you can reach out to me at: hello@hungvu.tech.
I just happened to see a post of the editor calling for author on some subjects and asked if the one about .NET 7 was still up for grabs. After a couple of mails to clarify the format and the points to be covered, the deadline has been set and here I am!
I have been working on a project called Elden Ring Web3 by Moralis ,learned a lot about SDKs and also learned some C# for game development in Unity. A very Interesting Project hope to complete it by next week.
About to launch my new personal site I've been working on for the last week or so: chriis.dev - excited to hear feedback on the design. Gonna be posting a blog post showcasing how I've done some of the more fun things on the site.
Also about to start working on an Elixir library I started a few months ago and haven't had the chance to get back to called Timebomb.
When that's all done I'm planning on getting back to doing some more blogging and hopefully finishing off another Elixir project written in the PETAL stack. Phew.
Since last year I am developing saferspaces.io. In Short, saferspaces offers a low-threshold and easy way to call for help in insecure situation of any kind. For the past 6 months we were lucky to have some financing, so I could work at least in part time for it (and not only after work / on weekends). Since beginning of march we are piloting in a club and recently had a test at a local festival. From next month on, however, this will be a project for weekends again as I will need to switch to a full-time employment again.
Header-Only C++ Library for Graph Representation and Algorithms
CXXGraph
Share on
Introduction
CXXGraph is a small library, header only, that manages the Graph and it's algorithms in C++. In other words a "Comprehensive C++ Graph Library"
An alternative to Boost Graph Library (BGL).
We are Looking for...
We are looking for:
Site Developer for the development of the CXXGraph site ( for the moment on GitHub Page );
Developers and Committers, also at first experience, we will guide you step by step to the open-source world!
If you are interested, please contact us at zigrazor@gmail.com or contribute to this project. We are waiting for you!
Multi Threading Library is a set of utilities, easy and ready to use for common task in multi threading environment and development.
Roadmap
Thread Class
Thread Manager
Thread Pool
Task Class
Ordered Task
Task Flow
Complete Documentation
Doxygen Integration
First Beta Release
Test Framework
CI/CD Pipeline
First Stable Release
Thread Monitoring
...
See the open issues for a full list of proposed features (and known issues).
Getting Started
This is an example of how you may give instructions on setting up your project locally
To get a local copy up and running follow these simple example steps.
Prerequisites
The following are required to get the project up and running.
git clone https://github.com/google/googletest.git # Dowload the Google Test repositorycd googletest # Main directory of the cloned repository.
mkdir -p build # Create a directory to hold the build output.cd build # Move
Few years ago I built a simple API that would draw geojson boundaries on google maps for a freelance client. I decided to rebuild it to learn a new stack and went all in. Transformed it into a no code tool for customizing maps. My goal was 30 days, did it in 20. Soft launched it on Monday. Check it out at cartta.io 👍🏽
I worked on adding a feature to recognize seed information by taking the photo of seed packets using Google ML Kit for Text recognition. I am really surprised & excited at the level of accuracy of the recognition.
I'm building a project in Laravel, I've called it "LaraRental" 🤣
It's a fun project using Tailwind CSS - I'm keen to learn the framework. I've been working on it the past 2 weekends, I've got my CRUD functionality & authentication working, it needs a little more work and then I can jump back to the frontend.
I am a professional DevOps Engineer with a demonstrated history of working in the internet industry. I am an avid Linux lover and supporter of the open-source movement philosophy.
educating about proxies - a technology enabling public data collection in large volumes, providing businesses with valuable insights into markets and their competitors
HTML, CSS, Bootstrap, XML, ajax, react js, WordPress, Magento, Shopify, Photoshop, Camtasia, SEO & learning new skills every moment 👨🏼💻 | I believe in learning and sharing with others 🛴
Hi, my team just released a brand new feature for image optimization. It's called VanceAI Image Enhancer. You can use it to improve image quality, enhance details, eliminate blurriness, and increase the resolution to get the best of your images.
I'm in MVP #1 of building a GYM Management System.
Using laravel for backend stuff and APIs, and Vuejs for frontend, at the same time I am trying to learn more about Unit Testing and TDD pattern.
Hello!
I'm Mohammed, I work on Java, C++ and sometimes web projects. I'm not a huge fan of web stuff, sounds boring. I love working close to the machine and working on computer graphics.
A few weeks ago I started writing articles again on DEV and I just recently had the opportunity to take it to the next step: writing an article for a programming magazine!
This is quite a challenge in a short period of time on a subject I do not fully master but it's also thrilling and challenging. So far it takes a lot of time but I am also learning a lot!
That is quite a step-up, congrats!
It is! Thank you 😄
Working on developing an open-source hassel-free audio/video SDK to help developers save time and money.
SDK will consist following features
Ambitious! Very exciting.
Thanks ben:)
I am interested in this.
I made a project called speaker.app which uses a peer-in-the-middle as a type of WebRTC proxy virtual server so that connected participants don't have to rely on mesh networks.
It doesn't get a lot of usage but my main goals were:
First three sounds like FFMPEG :) On what abstraction level are you operating?
It does, and a replacement for ffmpeg is sorely needed! Would love to hear more.
It's interesting to note that Chromium uses ffmpeg internally for media transcoding in its web browser (WebRTC & related).
Someone said, "yeah, but you can't access it." Ironically, a few weeks later, his Electron app wouldn't install because of a "ffmpeg.dll not found" error.
Playing around with Appsmith, working on building out a dashboard for another side project. Blown away by how slick the low-code solution works!
I'm attending a local game jam with the theme or retro remake, so grabbed one of the old favs of mine and went ham on programming!
Reasearching on options to build my own blog website. Ideally, it will be my portfolio too (my current one is way out dated 😢).
I just created a discussion on this topic too, so any recommendation is appreciated!
Which headless CMS would you recommend for a blog site?
Hung Vu ・ Jun 26 ・ 1 min read
To be honest: luck!
I just happened to see a post of the editor calling for author on some subjects and asked if the one about .NET 7 was still up for grabs. After a couple of mails to clarify the format and the points to be covered, the deadline has been set and here I am!
I have been working on a project called Elden Ring Web3 by Moralis ,learned a lot about SDKs and also learned some C# for game development in Unity. A very Interesting Project hope to complete it by next week.
About to launch my new personal site I've been working on for the last week or so: chriis.dev - excited to hear feedback on the design. Gonna be posting a blog post showcasing how I've done some of the more fun things on the site.
Also about to start working on an Elixir library I started a few months ago and haven't had the chance to get back to called Timebomb.
When that's all done I'm planning on getting back to doing some more blogging and hopefully finishing off another Elixir project written in the PETAL stack. Phew.
Since last year I am developing saferspaces.io. In Short, saferspaces offers a low-threshold and easy way to call for help in insecure situation of any kind. For the past 6 months we were lucky to have some financing, so I could work at least in part time for it (and not only after work / on weekends). Since beginning of march we are piloting in a club and recently had a test at a local festival. From next month on, however, this will be a project for weekends again as I will need to switch to a full-time employment again.
I share with you my Open Source Projects that I'm working on:
ZigRazor / CXXGraph
Header-Only C++ Library for Graph Representation and Algorithms
CXXGraph
Share on
Introduction
CXXGraph is a small library, header only, that manages the Graph and it's algorithms in C++. In other words a "Comprehensive C++ Graph Library" An alternative to Boost Graph Library (BGL).
We are Looking for...
We are looking for:
If you are interested, please contact us at zigrazor@gmail.com or contribute to this project. We are waiting for you!
Roadmap
ZigRazor / CXXMicroService
A C++ Library that give microservice framework ( Server / Client ) upon 0mq framework
CXXMicroService
A C++ Library that give microservice framework ( Server / Client )
Introduction
CXXMicroService is a C++ library, that manages MicroServices, upon different Framework ( actually only 0mq is implemented).
We are Looking for...
We are looking for:
If you are interested, please contact us at zigrazor@gmail.com or contribute to this project. We are waiting for you!
Roadmap
ZigRazor / MTL
Multi Thread Library
MTL (Multi Threading Library)
Multi Threading Library is a set of utilities, easy and ready to use for common task in multi threading environment and development.
Roadmap
See the open issues for a full list of proposed features (and known issues).
Getting Started
This is an example of how you may give instructions on setting up your project locally To get a local copy up and running follow these simple example steps.
Prerequisites
The following are required to get the project up and running.
Google Test
GoogleTest
ZigRazor / PyStateMachine
Python State Machine
PyStateMachine
Python State Machine
Introduction
PyStateMachine is a Framework that support state machines in Python
Requirements
How to Run
Work in Progess
Example
Work in Progess
Test Suite
Work in Progress
How to contribute
Read the CONTRIBUTING GUIDE
Hacktoberfest
We are pleased to inform you that this repository is participating in the #Hacktoberfest!
Happy Coding!
Contact
E-Mail : zigrazor@gmail.com
GitHub Profile
Support
To support me just add Star the project or follow me
To get updated watch the project
Project Info
I wrote my first npm package: dev.to/quachhengtony/climan-is-a-s...
I created this..
https://marketplace.visualstudio.com/items?itemName=msamgan.laravel-pint-vscode&ssr=false#overview
Few years ago I built a simple API that would draw geojson boundaries on google maps for a freelance client. I decided to rebuild it to learn a new stack and went all in. Transformed it into a no code tool for customizing maps. My goal was 30 days, did it in 20. Soft launched it on Monday. Check it out at cartta.io 👍🏽
Rewriting a fluid simulation I built that was originally in Rust + Typescript to pure Rust (and CSS of course)
I worked on adding a feature to recognize seed information by taking the photo of seed packets using Google ML Kit for Text recognition. I am really surprised & excited at the level of accuracy of the recognition.
I'm building a project in Laravel, I've called it "LaraRental" 🤣
It's a fun project using Tailwind CSS - I'm keen to learn the framework. I've been working on it the past 2 weekends, I've got my CRUD functionality & authentication working, it needs a little more work and then I can jump back to the frontend.
Got a few users to try out the early Tails V2 beta 🙌
I have a side hussle for you!
If there are people interested in technical writing on web scraping and data colletion topics, get in touch :)
Celestron CPC 800 XLT!! I'm having a BLAST :D
First day ... ;)
Website templates and online tools 🥴
Hi, my team just released a brand new feature for image optimization. It's called VanceAI Image Enhancer. You can use it to improve image quality, enhance details, eliminate blurriness, and increase the resolution to get the best of your images.
I'm in MVP #1 of building a GYM Management System.
Using laravel for backend stuff and APIs, and Vuejs for frontend, at the same time I am trying to learn more about Unit Testing and TDD pattern.
I'm working on Editor4J, a slimmed-down code editor that makes learning to code a less-stressful process.
Just finished a blockchain project for a hackathon:
cloaked.network
Using blockchain anyone can confirm that their secret has been deleted after being read.