DEV Community

Cover image for Automating BLE Development with BleuIO: Run Without a Host Computer
Bleuio tech
Bleuio tech

Posted on

Automating BLE Development with BleuIO: Run Without a Host Computer

#bluetoothlowenergy #bluetooth #bleuio

When working with Bluetooth Low Energy (BLE) devices, most developers expect to rely on a computer or microcontroller to send commands. BleuIO changes that expectation. More than a USB dongle, BleuIO is now capable of running standalone BLE automation — no host computer required.

This means you can plug BleuIO into any power source (USB adapter, hub, or power bank) and let it execute predefined tasks completely on its own.

Why Standalone Automation Matters

Traditional BLE prototyping involves:

  • Writing custom firmware
  • Using a host PC or MCU to send AT commands
  • Managing drivers, code, and extra hardware

With BleuIO, you can store AT commands inside the dongle itself. Once powered, the device automatically runs those commands in sequence or in a loop. No drivers. No host system. Just power → BLE.

This reduces development overhead, speeds up prototyping, and makes deployment more reliable.

Quick Example: A Beacon That Starts on Power-Up

Want to turn your BleuIO into a beacon without writing a single line of host code? Just set the auto execution list:

AT+AUTOEXEC=AT+ADVSTART
Enter fullscreen mode Exit fullscreen mode

Now, every time you power the dongle, it will begin advertising as a BLE beacon automatically.

Example: A Loop That Changes Beacon Data

You can also create dynamic advertising by alternating the beacon name every 10 seconds.

AT+AUTOEXECLOOP=START
AT+AUTOEXEC=AT+ADVDATA=04:09:42:6C:65:75:49:4F   // Name: BleuIO
AT+AUTOEXEC=AT+ADVSTART
AT+AUTOEXEC=AT+WAIT=10
AT+AUTOEXEC=AT+ADVDATA=04:09:43:41:54            // Name: CAT
AT+AUTOEXEC=AT+ADVSTART
AT+AUTOEXECLOOP=END
Enter fullscreen mode Exit fullscreen mode

Now BleuIO will broadcast as “BleuIO,” switch to “CAT” after 10 seconds, and repeat endlessly — all without a host device.

What You Can Build With This

  • Smart beacons that rotate data for marketing or tracking

  • Sensor broadcasting devices that push data to nearby scanners

  • Device-to-device automation where dongles communicate directly

  • Prototypes that don’t need PCs or microcontrollers to run

Learn More

If you’re new to BleuIO, check out the Getting Started guide and AT command reference.

BleuIO is more than a dongle — it’s your plug-and-play BLE automation engine.

Ready to cut out the middleman? Try running BleuIO without a host and see how much simpler BLE development can be.

Top comments (0)