DEV Community

Cover image for Automate the Deployment of a LAMP Stack & Laravel App with a Script and Ansible
ChigozieCO
ChigozieCO

Posted on • Edited on • Originally published at github.com

Automate the Deployment of a LAMP Stack & Laravel App with a Script and Ansible

#linux #mysql #php #bash

Let's dive into one of the most recent projects I did for a cloud engineering endeavour. We were tasked to:

  • Automate the provisioning of two Ubuntu-based servers, named “Master” and “Slave”, using Vagrant.
  • On the Master node, create a bash script to automate the deployment of a LAMP (Linux, Apache, MySQL, PHP) stack.
  • This script should clone a PHP application from GitHub, install all necessary packages, and configure Apache web server and MySQL.

  • Ensure the bash script is reusable and readable.

  • Using an Ansible playbook:

    • Execute the bash script on the Slave node and verify that the PHP application is accessible through the VM’s IP address (take screenshot of this as evidence)
    • Create a cron job to check the server’s uptime every 12 am.

Provision VMs

To begin this project I need to provision two Ubuntu servers named "Master" and "Slave" using vagrant.

I will be provisioning ubuntu 22.04 LTS for the Master and the slave and I will use a multi-machine environment, this basically means that I will define two VMs in one vagrantfile.

The first this I do is initialize the box, the box I'm using is ubuntu/jammy64 and because I am using a multi-machine environment I will pass the -m (minimal) flag so that the VagrantFile is created without all the comments.

vagrant init -m ubuntu/jammy64
Enter fullscreen mode Exit fullscreen mode

Vagrantup

When I open the VagrantFile to edit it, we can see that it has just the basic configuration without all the comments.

vi VagrantFile
Enter fullscreen mode Exit fullscreen mode

Vagrantfile

To configure my VMs, I will enter the below code into my VagrantFile.

Vagrant.configure("2") do |config|

  config.vm.define "master" do |master|
    master.vm.box = "ubuntu/jammy64"
    master.vm.hostname = "master"

    master.vm.network "private_network", type: "dhcp"
    master.vm.network :forwarded_port, guest: 22, host: 2030, id: "ssh"

    master.vm.provider "virtualbox" do |v|
      v.name = "Master"
    end
  end

  config.vm.define "slave" do |slave|
    slave.vm.box = "ubuntu/jammy64"
    slave.vm.hostname = "slave"

    slave.vm.network "private_network", type: "dhcp"
    slave.vm.network :forwarded_port, guest: 22, host: 2032, id: "ssh"

    slave.vm.provider "virtualbox" do |v|
      v.name = "Slave"
    end
  end

end
Enter fullscreen mode Exit fullscreen mode

In the VagrantFile I simply specified the type of base box with which each VM would be created, I ensured they used a private network and they get their IP address from the DHCP server. I also specified the name and hostname of each VM.

Another thing I did was to hard code the host SSH port so that I deal with the SSH clash that will happen, from the jump, another reason I did this is so that the port doesn't conflict with other VMs I have on my laptop.

To provision the VMs I ran the command

vagrant up
Enter fullscreen mode Exit fullscreen mode

From the images below you can see that both my master and slave machines were successfully provisioned.

Master-server

Slave-server

To access it and start working with it I SSH into them by specifying their names, as shown below

vagrant ssh master
vagrant ssh slave
Enter fullscreen mode Exit fullscreen mode

master&slave-ssh

Bash Script to Deploy LAMP Stack

A LAMP stack is an acronym for the operating system, Linux; the web server, Apache; the database server, MySQL; and the programming language, PHP.

This is a very common stack developers use to build websites and web applications.

The task asked that we write a script that would be used to automate the installation of the LAMP stack. With this script the LAMP stack deployment as well as the Laravel application deployment will be fully automated, this script will be written in a way as not to require any user input at all. I will try to explain my logic along the way.

Find the full script here, to create your script create a new file with the vi editor:

vi deploylamp.sh
Enter fullscreen mode Exit fullscreen mode

Install Apache

To begin, I want this script to stop running whenever it encounters an error at any point, as the successful deployment of the Laravel application is dependent on all the components of this script being present in the server. To accomplish this we will use the set -e command, start you script that way.

#!/bin/bash

# This command will make the script immediately close if any command exits with a non-zero status 
set -e
Enter fullscreen mode Exit fullscreen mode

Next we will update the apt repository so that our packages are up to date.

# Update apt repository
sudo apt update
Enter fullscreen mode Exit fullscreen mode

We finally get to the beginning of the main event, now we will add the command that installs Apache to our script, as earlier mentioned, apache is a very popular webserver used by developers.

To install apache add the command below to your script

# Install Apache and handle any errors if any
echo "Installing Apache ===================================================="
echo

sudo apt install -y apache2 || { echo "Error installing Apache"; exit 1; }
echo "Successfully installed apache ======================================="
echo
Enter fullscreen mode Exit fullscreen mode

The echo commands are there to inform us every step of the way what the script is up to.

The command sudo apt install -y apache2 || { echo "Error installing Apache"; exit 1; } will either install Apache or print an error message depending on whether the installation is successful or not.

Install MySQL

MySQL is a fast, multi-threaded, multi-user, and robust SQL database server. It is intended for mission-critical, heavy-load production systems and mass-deployed software.

Add the below to your bash script.

# Install MySQL and handle any errors if any
echo "Installing MySQL ===================================================="
echo

sudo apt install -y mysql-server || { echo "Error installing MySQL"; exit 1; }
echo "Successfully installed MySQL ======================================="
echo
echo
Enter fullscreen mode Exit fullscreen mode

Once the installation is complete, the MySQL server usually starts automatically.

Configure MySQL

The default configuration of MySQL is not secure, the root has no password and remote access is possible for the root user, it also comes with a test database and an anonymous user, these are the configs that we will be changing.

Ideally we would use the mysql_secure_installation script to secure the database but that would require user input and I'm trying to keep this LAMP deployment process as unattended as possible and so I will be using a here document that would provide all the necessary responses to the prompts that the script usually presents.

💡 NOTE

Another thing to note is that for security purposes I won't be hardcoding my root password in the script. Since this script will be run with Ansible I will save the password in Ansible vault. When we get to the Ansible configuration part of this project you will see how we will walk through the process of adding the password to Ansible vault.

Ansible provides a built-in solution called Ansible Vault for encrypting sensitive data. You can create an encrypted file to store the MySQL root password, and then Ansible will decrypt it when needed during playbook execution.

The way this will work is that ansible will decrypt the password, and pass it as an env variable as MYSQL_ROOT_PASSWORD (as we instruct it to do in the ansible playbook) which the bash script will then read and use while running the script.

This way everything is safe and secure.

Add the below to your script:

# Configure MySQL Server automatically, we won't hardcode the root password, it will be read from ansible vault
echo "Now configuring MySQL Server ======================================="

# Main MySQL configuration
sudo mysql <<EOF
CREATE DATABASE IF NOT EXISTS laravel;
ALTER USER 'root'@'localhost' IDENTIFIED WITH mysql_native_password BY '$MYSQL_ROOT_PASSWORD';
DELETE FROM mysql.user WHERE User='';
DELETE FROM mysql.user WHERE User='root' AND Host NOT IN ('localhost', '127.0.0.1', '::1');
DROP DATABASE IF EXISTS test;
DELETE FROM mysql.db WHERE Db='test' OR Db='test\_%';
FLUSH PRIVILEGES;
EOF
Enter fullscreen mode Exit fullscreen mode

The SQL commands in the above part of the script will essentially do what mysql_secure_installation does:

  • Creates a laravel database that the laravel app would use.
  • Set a new password for the root user.
  • Remove anonymous users.
  • Disallow remote root login.
  • Remove the test database and access to it.
  • Flush privileges to apply the changes.

Lastly we will check if the configuration succeeded or failed and print a message based on the exit code. Add the following to the script:

# Check if the configuration was successful or if there was an error and let us know which it is
if [ $? -ne 0 ]; then
    echo "Error: Failed to configure MySQL ====-============================================="
    echo
    exit 1
else
    echo "Successfully configured MySQl ==================================================="
    echo
fi
Enter fullscreen mode Exit fullscreen mode

Install PHP

PHP is a general-purpose scripting language, well-suited for Web development since PHP scripts can be embedded into HTML.

Disable any PHP Module you Might Have Previously Installed

Before installing PHP I will disable any php module I had previously installed, I found this step necessary because while testing my script, after successfully deploying the Laravel application the app didn't come up I kept getting the error shown below.

php-version-error

Upon further investigation after running apachectl -M | grep php I found out that apache was using a lower version of php (7.4) not the latest 8.2 I had just installed.

$ apachectl -M | grep php
 php7_module (shared)
Enter fullscreen mode Exit fullscreen mode

To save you that stress, first disable any old one that might exist on your server before installing the latest version using the if statement below. Add to your script

# Check if any PHP module is enabled
if apachectl -M 2>/dev/null | grep -q 'php'; then
    # Disable all PHP modules
    sudo a2dismod php*
    echo "All PHP modules disabled =========================================================="
else
    echo "No PHP modules found =========================================================="
fi
Enter fullscreen mode Exit fullscreen mode

  • The script uses apachectl -M to list all enabled Apache modules.

  • If a PHP module is found, the script disables all PHP modules using sudo a2dismod php*, which disables any module starting with "php". This is a precautionary measure in case there are multiple PHP versions installed.

  • If no PHP modules are found, it prints a message indicating that no PHP modules were found.

Install the Latest Version

Although PHP is available on Ubuntu Linux Apt repository, to be able to get the latest version I will add the OndreJ PPA and install it from there.

I will also be installing some necessary dependencies that MySQL needs to be able to work with PHP.

Add the following to the script:

# Install dependencies first
sudo apt install -y software-properties-common apt-transport-https ca-certificates lsb-release
# Add the OndreJ PPA to allow us install the latest version of PHP
sudo add-apt-repository -y ppa:ondrej/php
sudo apt update
# Install php and necessary modules
sudo apt install -y php8.2 php8.2-mysql php8.2-cli php8.2-gd php8.2-zip php8.2-mbstring php8.2-xmlrpc php8.2-soap php8.2-xml php8.2-curl php8.2-dom || { echo "Error installing php and php modules"; exit 1; }
echo "Successful installed PHP and necessary modules =================================="
echo
Enter fullscreen mode Exit fullscreen mode

Enable URL Rewriting and the new PHP module 

# Enable Apache's URL rewriting and restart Apache
sudo a2enmod rewrite
# Incase mpm_event is enabled disable it and enable mpm_forked as that is what php8.2 needs
sudo a2dismod mpm_event #In one of my tests this was enabled by default but php needed the prefork and it caused errors for me.
sudo a2enmod mpm_prefork 
sudo a2enmod php8.2
sudo service apache2 restart
echo "URL rewrite and PHP module enabled and Apache restarted ========================================================================"
echo
Enter fullscreen mode Exit fullscreen mode

Enabling the rewrite module in Apache (a2enmod rewrite) is typically necessary for Laravel applications and many other web applications that use URL rewriting for routing and clean URLs.

Laravel, like many modern PHP frameworks, relies on URL rewriting to route requests through its front controller (index.php). This allows for cleaner and more expressive URLs without the need for file extensions or query parameters.

The newly installed PHP 8.2 module won't be automatically enabled after installation. After installing PHP 8.2, we'll still need to enable the PHP 8.2 module for Apache to use it. You can do this using the a2enmod command as shown above.

Install Git

We will clone the GitHub repo that has the Laravel application and so we need to ensure that we have Git installed in our server. If Git isn't installed we will install it.

I'd use an if statement for this logic:

# Check if git is installed, if it isn't, install it.
if ! command -v git &> /dev/null; then
  echo "installing git ================================================================="
  sudo apt update
  sudo apt install -y git
  echo "Git Installation complete ======================================================="
  echo
fi
Enter fullscreen mode Exit fullscreen mode

Install Composer

Composer is a PHP dependency manager that facilitates the download of PHP libraries in our projects. Composer both works great with and makes it much easier to install Laravel.

I will first download the Composer installer script from the composer site using curl, pipe it directly to php, and execute it.

Then move it into a location on my server's PATH so that it is globally accessible and lastly make it executable.

# Install composer, composer is required to install laravel dependencies
# Use curl to download the Composer installer script and pipe it directly to php for execution.
curl -sS https://getcomposer.org/installer | php
# Move the script to a location in your path so that it is executable globally
sudo mv composer.phar /usr/local/bin/composer
# Make composer executable
sudo chmod +x /usr/local/bin/composer
Enter fullscreen mode Exit fullscreen mode

Clone the Repository and Install Dependencies

We will clone this repo, this is the official Laravel application repo.

Before cloning the repo I want to delete any content that was in that directory, we will be cloning directly into the /var/www/html directory. You could create a new directory for this but I want to keep this whole process as simple as possible.

Now I navigate into the /var/www/html directory and then I'll go ahead and clone the repo, I will do this in Apache document root and then install the dependencies with composer.

# Before cloning the git repository and installing it's dependencies with composer first remove the content in the /var/www/html directory so we can clone directly into it
echo
sudo rm -rf /var/www/html/*
Enter fullscreen mode Exit fullscreen mode

⚡ SIDE NOTE

I was running into a lot of permission errors when root owned the files in the /var/www/html directory and so I had to change the ownership so that my user would be the owner. Wherever you see vagrant replace that with your username (the one you are using for this deployment).

# Add Vagrant user to the www-data group and correct file permissions
sudo usermod -a -G www-data vagrant
# Set the group ownership of the /var/www/html directory to www-data
sudo chown -R vagrant:www-data /var/www/html
echo "Group ownership of /var/www/html changed ========================================================================"
echo

# Grant write permissions to the www-data group for the /var/www/html directory
sudo chmod -R 775 /var/www/html
echo "Group can now write to the /var/www/html directory =============================================================="
echo

# Navigate to Apache Document root first
cd /var/www/html
# Clone the repo directory in this directory (remember the full stop at the end of the command, it is very important)
git clone https://github.com/laravel/laravel.git .
# Install dependencies with composer
composer install
Enter fullscreen mode Exit fullscreen mode

Update ENV File and Generate an Encryption Key

We need to create a .env file after cloning the git repository or starting a new Laravel project. The .env.example file is typically copied, and the contents of the copied .env file are then updated.

The following commands are what we will use to copy the file from .env.example to .env and generate an encryption key. So add the below to your script:

# Update the env file and generate an encryption key
cd /var/www/html
cp .env.example .env
php artisan key:generate
Enter fullscreen mode Exit fullscreen mode

The php artisan key:generate command is typically used in Laravel projects to generate a new application key. This key is used for encryption and hashing within the Laravel application, such as encrypting session data and generating secure hashes.

When you run php artisan key:generate, Laravel generates a new random key and updates the APP_KEY value in the .env file of your Laravel project with this new key.

Change Permissions on Storage and Bootstrap Directory

Honestly this step could have been carried out right before we create our .env file and generate our APP_KEY, immediately after cloning the repo but whatever, it hurts no one.

If your /var/www/html/storage file and your /var/www/html/bootstrap/cache files do not belong to the www-data user you experience the error message below because the www-data user which Apache uses for web related activities won't have the necessary permissions that Laravel needs to fully function.

permission-denied-error

Add the below to your script to change the ownership of those directories.

# Set permission for the storage and bootstrap directories
sudo chown -R www-data /var/www/html/storage
sudo chown -R www-data /var/www/html/bootstrap/cache
echo "Permission changed for the storage and bootstrap directories ===================================================="
Enter fullscreen mode Exit fullscreen mode

Update ENV

We also need to update the .env file with our database credentials and update the APP_URL value. Presently it points to the localhost as the APP_URL but I need it to point to my server's IP address so that I can access the Laravel application from my IP address and not just localhost (127.0.0.1).

Like you might have already noticed I am trying to make this script as unattended as possible and so I will use sed to search and replace the APP_URL line in the .env file with the actual value I want and then echo the other database credentials I want in the file.

This will allow my updating the .env file be as unattended as possible. Add the following to your script, ensure to replace with your own credentials where necessary.

# Change the APP_URL value to be the IP address of your server
# Get the IP address of the machine
ip_address=$(hostname -I | awk '{print $2}')

# Update the value of APP_URL in the .env file
sed -i "s/^APP_URL=.*/APP_URL=http:\/\/$ip_address/" /var/www/html/.env
Enter fullscreen mode Exit fullscreen mode

  • hostname -I | awk '{print $2}' retrieves the IP address of the machine.

  • hostname -I gets a list of IP addresses associated with the hostname, and awk '{print $2}' selects the second IP address from the list. (I prefer to use the second that comes up on my server as that is the unique one for me, you can change 2 to 1 as you see fit).

We also need to add some database configuration parameters, we will use sed to replace what needs replacing and echo the new items into the file.

Add the following to your script

# Add additional database config

# Update the value of DB_CONNECTION to mysql
sed -i "s/^DB_CONNECTION=.*/DB_CONNECTION=mysql/" /var/www/html/.env

# Add additional database configuration parameters
echo -e "\nDB_HOST=127.0.0.1\nDB_PORT=3306\nDB_DATABASE=laravel\nDB_USERNAME=root\nDB_PASSWORD=\"\$MYSQL_ROOT_PASSWORD\"" >> /var/www/html/.env
Enter fullscreen mode Exit fullscreen mode

Adjust the VirtualHost File

Usually you will find your index.html or index.php file directly in the /var/www/html directory but with laravel it is different, the index.php file is located in the public directory and so we have to tell apache to route the traffic into the public directory so it can find our home page there and serve that page by default.

We just have to add /public at the end of the DocumentRoot and at other places in the virtual host file where we have to define the document root of our project.

Add the below to your script.

SERVER_ADMIN="<your email address>"
DOCUMENT_ROOT="/var/www/html/public"

# Update the 000-default.conf file
sudo sed -i -E "s/#?\s*ServerName .*/ServerName $ip_address/" /etc/apache2/sites-available/000-default.conf
sudo sed -i "s/ServerAdmin .*/ServerAdmin $SERVER_ADMIN/" /etc/apache2/sites-available/000-default.conf
sudo sed -i "s|DocumentRoot .*|DocumentRoot $DOCUMENT_ROOT|" /etc/apache2/sites-available/000-default.conf

# Restart Apache to apply changes
sudo systemctl restart apache2
Enter fullscreen mode Exit fullscreen mode

Run Database Migration

The last step is to run your migrations to build your application’s database tables. This step is necessary if you don't want to get the error message below

db-error

Ideally when you run the migrate command, as we will next, your database gets created (if it previously didn't exist) along with the tables and necessary schema.

cli-prompt

Note however that this command does not have a built-in -y flag to automatically accept the database creation and so will require user input which is why I went back and added the creation of the database in the MySQL installation (you don't have to sweat it).

Add the following to your script:

# Run outstanding migrations
php artisan migrate
echo "Database migrated successfully =================================================================================="
echo
echo "LAMP stack deployment complete, Laravel Repo fully cloned and configured ========================================"
Enter fullscreen mode Exit fullscreen mode

And that's it for the bash script, save the changes and close the file

Make the Script Executable

To be able to run the script we need to make it executable. Use the command below.

chmod +x deploylamp.sh
Enter fullscreen mode Exit fullscreen mode

Install Ansible

The first part of this task was to automate our deployment with a bash script which we have done up until now, the second part is to run the aforementioned script using an Ansible playbook.

To achieve this, we first need to install Ansible on our server, do this by running the following commands:

sudo apt update
sudo apt install software-properties-common
sudo add-apt-repository --yes --update ppa:ansible/ansible
sudo apt install ansible
Enter fullscreen mode Exit fullscreen mode

⚠️ EXPERT TIP

You need to have a common user amongst your servers so that Ansible can function properly. Go ahead and create matching users on all your servers and ensure that the users have sudo privilege and can run sudo commands without password. If you don't know how to, you can checkout my previous Ansible guide here to see how it's done.

I will be using my vagrant user as I have one on all my servers.

You also need to generate an ssh key on your master server (also called control node, this is the machine from which you will run your Ansible commands) and copy the public key to your slave server(s) (the managed node where you want the final result on). You can also find the steps in this post

Create Inventory

To use Ansible, all our slave servers (managed nodes) has to be listed in a file known as the inventory. You can name this file anything you choose and the file will contain the IP address or URL of the managed nodes.

Create a file, name it anything you want, I will name mine examhost as this project is for my exam and enter the IP address of your managed node(s).

You can retrieve the IP address of your server by running the ip a command on the server you want it's IP address.

vi examhost
Enter fullscreen mode Exit fullscreen mode

Save the IP addresses

<machine IP>
Enter fullscreen mode Exit fullscreen mode

Save your file.

Configure Ansible Vault

Ansible provides a built-in solution called Ansible Vault for encrypting sensitive data. We will create an encrypted file to store the MySQL root password as discussed here, and then decrypt it when needed during playbook execution.

Using Ansible Vault allows you to encrypt sensitive data within Ansible playbooks, roles, or other files. First we will create the file with the below command.

When you run the command you will be prompted for a password. After providing a password, the tool will launch whatever editor you have defined with $EDITOR, and defaults to vim if you haven't defined any. Once you are done with the editor session, the file will be saved as encrypted data.

💡 EXPERT TIP

Take note of the directory you're at while creating the vault file, you will need to enter the file path in your play book. If you already missed it though, no worries you can use the command find / -name [file name] 2>/dev/null to find the path

ansible-vault create mysql_pass.yml
Enter fullscreen mode Exit fullscreen mode

ansible-vault

Ensure you do not forget your password as you will need it when you run your playbook.

When the file opens, enter the below:

mysql_root_password: <YourMySQLRootPasswordHere>
Enter fullscreen mode Exit fullscreen mode

To prove that the file has been encrypted, display the content using the cat command and you will see something similar to the below image:

encrypted-vault-secret

💡 TIP

If for any reason you need to edit an encrypted file in place, use the ansible-vault edit command. This command will decrypt the file to a temporary file and allow you to edit the file, saving it back when done and removing the temporary file:

ansible-vault edit <file name>
Enter fullscreen mode Exit fullscreen mode

Configure Your Ansible Configuration File

The default ansible configuration file is in the ansible.cfg file however when you open that file you will find it almost empty with instructions on how to populate it.

When you run the ansible --version you will see where your current config file is located.

For what we want to do though we want our configuration very basic and so I will create a new ansible.cfg file and populate it with the basic configuration I want to use for this project.

vi ansible.cfg
Enter fullscreen mode Exit fullscreen mode

Enter the below into the file:

[defaults]
inventory = examhost
remote_user = vagrant
host_key_checking = False

[privilege_escalation]
become = true
become_method = sudo
become_user = root
become_ack_pass = false

[ssh_connection]
ssh_args = -o ControlMaster=auto -o ControlPersist=3600s
Enter fullscreen mode Exit fullscreen mode

When I first ran my playbook, the execution took a whole lot of time and so I added the ssh_connection parameters to try and speed things up.

Check Connectivity

You can check your connectivity to your server(s) using adhoc commands. So long as you correctly saved the public key of your ssh key in the authorized keys file of your slave node(s) and the slave node IP address in your inventory file is correct your ping should go through.

Check your connection using the command below:

ansible all -m ping
Enter fullscreen mode Exit fullscreen mode

The below image confirms that the connection was established successfully

successful-ping

💡 EXPERT TIP

Because we specified our inventory file in the ansible.cfg file and we are running the command from the same directory as where the ansible config file is saved, we do not need to pass the inventory file path along with the -i flag with the adhoc command.

Assuming you wanted to run the command from somewhere else this is the command to use:

ansible all -i </path/to/inventory> -m ping
Enter fullscreen mode Exit fullscreen mode

Create Playbook

We have finally gotten to the main event. An Ansible playbook is a YAML file that contains a set of instructions or tasks to be executed by Ansible on remote hosts.

Playbooks allow you to define configurations, orchestrate multiple tasks, and automate complex deployments in a structured and repeatable way.

vi deploylaravel.yml
Enter fullscreen mode Exit fullscreen mode

Add the below to your playbook:

---
- name: Deploy Laravel app and create cron job
  hosts: all
  become: false
  vars_files:
    - /home/vagrant/ansible/mysql_pass.yml
  tasks:
    - name: Run bash script to deploy laravel app
      ansible.builtin.script: /home/vagrant/deploylamp.sh
      environment:
        MYSQL_ROOT_PASSWORD: "{{ mysql_root_password }}"

    - name: Ensure the MAILTO variable is present so we can receive the cron job output
      cronvar:
        name: MAILTO
        value: "cnma.devtest@gmail.com"
        user: "vagrant"

    - name: Create a cron job to check the server’s uptime every 12 am
      ansible.builtin.cron:
        name: Check server uptime
        minute: "0"
        hour: "0"
        job: "/usr/bin/uptime | awk '{ print \"[\" strftime(\"\\%Y-\\%m-\\%d\"), \"]\", $0 }' >> /home/vagrant/uptime.log 2>&1"
        #"date && /usr/bin/uptime && echo >> /home/vagrant/uptime.log"
Enter fullscreen mode Exit fullscreen mode

This playbook has 3 tasks, the first task will execute the script we wrote earlier.

The second is optional to this project, it will set MAILTO along with the email address. This simply tells cron to send an email with the output of the cron job to the mentioned email address when ever the job runs. Skip this task if you do not want to receive emails concerning the cron job. If you leave this however, you need to have already configured the ability to send email from your terminal. You can check out this post to see how to achieve this.

The last task will create a cron job that will run at every 12am and send the output to an uptime.log file located in our user's home directory. If you took out the second task, then ensure to add the user parameter as seen in the second task in your 3rd task if not it defaults to root as the user creating the job.

Run Playbook

Run the play book now with the below command:

ansible-playbook -i <path/to/inventory> <path/to/playbook> --ask-vault-pass
Enter fullscreen mode Exit fullscreen mode

The --ask-vault-pass is necessary so that ansible will ask us for our vault password and it can use it to decrypt our secret (our mysql root password) and use it while running our script.

For verbosity, to see the logs as the playbook is executed use the -v flag. -v being the lowest and -vvvvv being the highest.

⚠️ NOTE
The playbook execution might take some time, so sit tight.

What a successful playbook execution looks like:

successful-run

You can confirm that the cronjob was successfully set by listing the crontab for that user, cronjobs are user specific so ensure you run the command for the user you used.

crontab -l
Enter fullscreen mode Exit fullscreen mode

cronjob

Laravel App Homepage

After successfully going through this process you should see either of these displayed when you enter your IP address in your browser.

They are both the same page just in light mode and dark mode. This was a very tumultuous ride. Take note of my IP address in the images.

Light mode

light-mode-laravel

Dark mode

dark-mode-laravel

Link to a copy of the uptime.log file.

And that's it. Exam done and dusted!!!

Top comments (0)

Some comments may only be visible to logged-in visitors. Sign in to view all comments.

Read next

xxzeroxx profile image

How to update composer

Antonio Silva -

jackmacwindows profile image

Printing coredumps automatically with systemd and ReceiptIO

JackMacWindows -

crazycomplete profile image

crazy-complete: Generate shell auto-completion files with a single configuration file

Benjamin Abendroth -

sergelogvinov profile image

Proxmox cpu affinity for VMs

Serge Logvinov -