Yes, the title is a clickbait. There is no way you can understand the basics of git technology in just 10 minutes. But you can get pretty close in about 25 minutes. And that is the purpose of this article.
If you want to get started on learning about Git technology, you’ve come to the right place. This is a comprehensive beginner’s guide to Git. There are many clients for Git. The technology is all the same no matter the client. But in this guide, we’ll be using GitHub to understand Git.
Version control is a system that records changes to a file or set of files over time so that you can recall specific versions later. So ideally, we can place any file in the computer on version control.
A Version Control System (VCS) allows you to revert files back to a previous state, revert the entire project back to a previous state, review changes made over time, see who last modified something that might be causing a problem, who introduced an issue and when, and more. Using a VCS also means that if you screw things up or lose files, you can generally recover easily. And sometimes you just want to know “who wrote this crap”, and having access to that information is worthwhile 😈.
Git is a version control system for tracking changes in computer files and coordinating work on those files among multiple people. Git is a Distributed Version Control System. So Git does not necessarily rely on a central server to store all the versions of a project’s files. Instead, every user “clones” a copy of a repository (a collection of files) and has the full history of the project on their own hard drive. This clone has all of the metadata of the original while the original itself is stored on a self-hosted server or a third party hosting service like GitHub.
Git helps you keep track of the changes you make to your code. It is basically the history tab for your code editor(With no incognito mode 🌚). If at any point while coding you hit a fatal error and don’t know what’s causing it you can always revert back to the stable state. So it is very helpful for debugging. Or you can simply see what changes you made to your code over time.
In the example above, all three cards represent different versions of the same file. We can select which version of the file we want to use at any point of time. So I can jump to and fro to any version of the file in the git time continuum.
Git also helps you synchronise code between multiple people. So imagine you and your friend are collaborating on a project. You both are working on the same project files. Now Git takes those changes you and your friend made independently and merges them to a single “Master” repository. So by using Git you can ensure you both are working on the most recent version of the repository. So you don’t have to worry about mailing your files to each other and working with a ridiculous number of copies of the original file. And collaborating long distance becomes as easy as HTML 🙃.
Before we start working with Git commands, it is necessary that you understand what it represents.
A repository a.k.a. repo is nothing but a collection of source code.
Working Directory, Staging Area, Local Repository and Remote Repository.
If you consider a file in your Working Directory, it can be in three possible states.
It can be staged. Which means the files with the updated changes are marked to be committed to the local repository but not yet committed.
It can be modified. Which means the files with the updated changes are not yet stored in the local repository.
It can be committed. Which means that the changes you made to your file are safely stored in the local repository.
git add is a command used to add a file that is in the working directory to the staging area.
git commit is a command used to add all files that are staged to the local repository.
git push is a command used to add all committed files in the local repository to the remote repository. So in the remote repository, all files and changes will be visible to anyone with access to the remote repository.
git fetch is a command used to get files from the remote repository to the local repository but not into the working directory.
git merge is a command used to get the files from the local repository into the working directory.
git pull is command used to get files from the remote repository directly into the working directory. It is equivalent to a git fetch and a git merge.
Now that we know what Git is and it’s basic terminologies, let’s see how we can place a file under git. We’re going to do it the right way and the difficult way. Without any GUI applications.
I’m assuming you already have a file you want to place under version control. If not create a sample folder named ‘MuskCult’ and place some sample code files in it.
If you don't already have one, you can make one here.
If you are on a Mac, fire up the terminal and enter the following command:
$ git --version
This will prompt open an installer if you don’t already have git. So set it up using the installer. If you have git already, it’ll just show you which version of git you have installed.
If you are running Linux(deb), enter the following in the terminal:
$ sudo apt install git-all
If you are on Windows:
$ get a mac
Introduce yourself. Slide in. Seriously, mention your Git username and email address, since every Git commit will use this information to identify you as the author.
$ git config --global user.name "YOUR_USERNAME" $ git config --global user.email "firstname.lastname@example.org" $ git config --global --list # To check the info you just provided
Why you ask? Using the SSH protocol , you can connect and authenticate to remote servers and services. With SSH keys, you can connect to GitHub without supplying your username or password at each visit.
Follow this link to learn more about SSH.
Go here to check if you have an existing SSH key.
Go here to generate a SSH Key.
Go here to add the SSH key to your GitHub account.
And finally, go here to test its connection.
If you did setup SSH, every git command that has a link you replace it by:
**Instead of: https://github.com/username/reponame** **You use : email@example.com/username/reponame.git** **Note: You can use both ways alternatively**
I’ll be using SSH protocol in this tutorial.
Create a new repository on GitHub. Follow this link.
Now, locate to the folder you want to place under git in your terminal.
$ cd Desktop/MuskCult
And to place it under git, enter:
$ touch README.md # To create a README file for the repository $ git init # Initiates an empty git repository
Now go edit the README.md file to provide information about the repository.
Now to add the files to the git repository for commit:
$ git add . # Adds all the files in the local repository and stages them for commit OR if you want to add a specific file $ git add README.md # To add a specific file
$ git status # Lists all new or modified files to be committed
Now to commit files you added to your git repo:
$ git commit -m "First commit" # The message in the " " is given so that the other users can read the message and see what changes you made
Now suppose you just made some error in your code or placed an unwanted file inside the repository, you can unstage the files you just added using:
$ git reset HEAD~1 # Remove the most recent commit # Commit again!
Now each time you make changes in your files and save it, it won’t be automatically updated on GitHub. All the changes we made in the file are updated in the local repository. Now to update the changes to the master:
$ git remote add origin remote_repository_URL # sets the new remote
The git remote command lets you create, view and delete connections to other repositories.
$ git remote -v # List the remote connections you have to other repositories.
The git remote -v command lists the URLs of the remote connections you have to other repositories.
$ git push -u origin master # pushes changes to origin
Now the git push command pushes the changes in your local repository up to the remote repository you specified as the origin.
And now if we go and check our repository page on GitHub it should look something like this:
And that’s it. You’ve just added the files to the repository you just created on GitHub.
Once you start making changes on your files and you save them, the file won’t match the last version that was committed to git. To see the changes you just made:
$ git diff # To show the files changes not yet staged
Now you can choose to revert back to the last committed version by entering:
$ git checkout . OR for a specific file $ git checkout -- <filename>
You can use the git log command to see the history of commit you made to your files:
$ git log
Each time you make changes that you want to be reflected on GitHub, the following are the most common flow of commands:
$ git add . $ git status # Lists all new or modified files to be committed $ git commit -m "Second commit" $ git push -u origin master
Now if we go and see our repo, we can identify whether the commit was successful by looking at the commit message for each file.
Locate to the directory you want to clone the repo. Copy the link of the repository you want and enter the following:
$ git clone remote_repository_URL
Feel free to go ahead and clone the repo I created above using: https://github.com/Gothamv/MuskCult
Now you can work on the files you want and commit to changes locally. If you want to push changes to that repository you either have to be added as a collaborator for the repository or you have to create something known as a pull request. Go and check out how to do one here and give me a pull request with your code file.
So imagine you and your friend are collaborating on a project. You both are working on the same project files. Each time you make some changes and push it into the master repo, your friend has to pull the changes that you pushed into the git repo. Meaning to make sure you’re working on the latest version of the git repo each time you start working, a git pull command is the way to go.
Now below is an example of a project my friend and I are collaborating on:
So to make sure those changes are reflected on my local copy of the repo:
$ git pull origin master
$ git fetch AND $ git merge
In the simplest terms, git fetch followed by a git merge equals a git pull. But then why do these exist?
When you use git pull, Git tries to automatically do your work for you. It is context sensitive, so Git will merge any pulled commits into the branch you are currently working in. git pull automatically merges the commits without letting you review them first.
When you git fetch, Git gathers any commits from the target branch that do not exist in your current branch and stores them in your local repository. However, it does not merge them with your current branch. This is particularly useful if you need to keep your repository up to date, but are working on something that might break if you update your files. To integrate the commits into your master branch, you use git merge.
So what is it?
.gitignore tells git which files (or patterns) it should ignore. It's usually used to avoid committing transient files from your working directory that aren't useful to other collaborators, such as compilation products, temporary files IDEs create, etc.
So in the above example, files like pycache, .DS_Store are used by the system to store information for faster access. This is not useful for other collaborators. So we can tell git to ignore them by adding a .gitignore file.
Use the touch command to create the .gitignore file:
$ touch .gitignore
And you can add the following patterns to tell git to ignore such files.
etc. depending upon the files you want git to untrack
And that’s pretty much it for the basics. Stay tuned for Part 2 which will focus on Branch, Merge, Stash, Rebase etc.