This is part 4 of a series of articles entitled Functional Patterns.
Make sure to check out the rest of the articles!
State
A big part of what defines functional programming— is the immutability of state. Because via this, we can immediately guarantee idempotence, a strict mapping of our input to output, just like in Mathematics.
Idempotence or referential transparency is just a fancy way of saying: If you give me x, I will always give you y. Moreover, referential transparency specifically, says that you can replace all occurrences of your function with the actual function body and your code should be functionally the same.
# python
def double(n):
return n * 2
double(n)
# should be replaceable by
n * 2
At first glance you might probably go: "Well, duh, a function call is pretty much substituting code."
But this is sometimes not true, specifically when your function has side-effects.
A side-effect is state mutated (or changed) outside of the scope of the function.
Example:
counter = 0
def count():
global counter
counter += 1
return counter
count() # 1
count() # 2
count() # 3
Even though we're calling count with the same argument (nothing!), we end up with different output! This is because this function has a side-effect of updating the state of counter, which is outside of its scope. Therefore, this function is not purely functional.
This immutability of state allows us to think in a simpler, and more pure way of avoiding side-effects altogether. And in this design do we find that, already, a lot of bugs start becoming impossible by design and that is truely something to give merit to functional programming for.
However, this does not come without its consequence (as it is a constraint, after all). But like any other constraint in functional programming, there is an elegant workaround to it.
In this article we'll talk about iteration, in the pure functional sense, and realizing how overrated for-loops are.
Recursion
A problem with the aforementioned constraint of immutability, is that some code structures inherently rely on state, such as the for-loop.
for (int i = 0; i < 10; i++) {
// ...
}
Here's a ubiquitous for-loop construct. We declare some state i, our counter, and then we increment it on every iteration until we fail our condition. Looks good, works pretty well. But the problem lies in how we're relying on mutable state to ensure idempotent behavior.
for (int i = 0; i < 10; i++) {
i--;
}
When we modify the logic inside of the for-loop (not modifying the for-loop itself), we can introduce bugs such as this one that creates an infinite loop. All because our iteration relies on mutable state.
You might be thinking: "Okay, so for-loops are evil, how are we going to do iterations now?"
Okay no more assumptions on what you're thinking, you're likely more clever than that (or you've read the section header). Here's the answer: Every for-loop can be written recursively.
void loop(const int i) {
if (i >= 10) return;
loop(i+1)
}
Oh yeah, computer science! Though significantly more code in an imperative sense, note that it's no longer possible to create the same bug we had in the for-loop without modifying the recursive construct itself, and in that case, skill issue.
Here's that expression in both Haskell and Elixir, which are both functional languages:
loop n
| n >= 10 = undefined
| otherwise = loop n+1
def loop(n) when n >= 10, do: nil
def loop(n), do: loop n+1
So much cleaner (and the only way to do standard iteration in these languages).
Do note that although these do the same amount of iteration, they don't actually equal each other exactly. And that's because most for-loops rely on mutable state to be useful. The reason you're probably going to be looping 10 times is imperative, or introduces some side-effect (like printing to standard output). And to make up for that, functional recursions will always have you returning something, the reason you did recursion in the first place, no side-effects.
The Call Stack
If you have ever used recursion before, you will probably be aware of its biggest drawback when compared to iterative constructs, and that is— the call stack.
Every time you enter a function, your program keeps track of it by putting it on the call stack as a stack frame. And when it's done, it simply has to pop that off, and now you're back to the function that called it, and again and again, until you get back to your main function.
This poses as a constraint as maintaining the call stack takes significantly more memory than just keeping track of a counter for iteration. In fact, this leads us to a very common error, the stack overflow.
A stack overflow occurs, when you are in a nested call deeper than what your call stack can handle, and this occurs WAY earlier than an integer overflow (when the computer can no longer represent your big number, so it loops back around to the smallest number), which is the hypothetical bound to our for-loop.
This is problematic, because what if we, for some reason, did need to iterate that many times?
-- haskell
factorial 1 = 1 -- we set the base case via pattern matching
factorial n = n * factorial (n - 1)
This factorial function would be bounded by the call stack! Not good. This form is what we call head recursion. This is the most common form of recursion, and you'd be forgiven to think that it's the only form of recursion.
The Tail Call Optimization
factorial a 1 = a
factorial a n = factorial (a * n) (n - 1)
This is the same factorial function, but in tail recursive form. Spot the differences. For clarity, here's an imperative example as well:
# head recursive
def factorial(n):
if n == 1: return 1
return n * factorial(n-1)
# tail recursive
def factorial_t(a = 1, n):
if n == 1: return a
return factorial_t(a * n, n - 1)
The difference in these implementations is that— in tail recursion, we don't need the previous stack frame. We don't need anything from the previous call. We can store all the information we need in our a parameter, which stands for the accumulator (because this is where you accumulate your computation, instead of relying on the call stack).
In fact, we can just re-use our stack frame for our new call. This is called tail-call optimization, a compiler trick done by functional languages (and some imperative languages such as Rust, Lua, and Javascript) wherein it sees that there is no more computation needed after the recursive call, so it reuses the same stack frame. Not only is this much faster, it actually removes the possibility of a stack overflow entirely.
To better understand what it means to no longer have any other computation past the recursive call, think about how when you get to the lowest depth of head recursion, you now have to go back down the call stack, multiplying the accumulated ns while you were nesting calls. But in tail-recursion, you can get your return value (your accumulator) when you get to your final recursive call, no need for traversing the call stack twice.
The most common example of tail-recursion, and is actually just the generalization of it, is the reduce/fold function.
Function Origami
If you are from a Javascript background, you've most likely encountered the reduce function. In fact, you might be familiar with this idiom for summing numbers:
sum = arr => arr.reduce((a,b) => a + b, 0)
reduce is actually (roughly) equivalent to this tail recursive function:
# python (because i don't want to deal with array prototype)
def reduce(arr, fn, acc):
if len(arr) == 0: return # base case, no more array
acc = fn(acc, arr[0]) # apply fn to the head of the array and the accumulator
return reduce(arr[1:], fn, acc) # recur with the rest of the array and the new accumulator
As we can see, reduce (also known as fold) is just a generalization over a tail recursive function! And you'd be surprised at how many things you can express as a reduce.
reduce/foldgets its name from the fact that itreduces/foldsdimensions of an array. Reducing a 2D array yields you a 1D array, and reducing a 1D array yields you an atom (single value). Neat!
Haskell provides us with two standard fold functions, foldr (reduces from the right) and foldl (reduces from the left).
Here are some examples:
sum = foldr (+) 0 -- partial application
product = foldr (*) 1 -- it doesn't matter whether we use foldr or foldl
any = foldr (||) False -- because these operations are monoids over their inputs
all = foldr (&&) True -- (which guarantees associativity)
factorial n = foldr1 (*) [1..n] -- foldr1 takes the first element as the initial value
-- Folding from the left and prepending the result to an accumulator returns you the reversed array
reverse = foldl (\acc x -> x : acc) []
{-
ARRAY | ACCUMULATOR
[1 2 3] [ ]
[2 3] [1]
[3] [2 1]
[ ] [3 2 1]
-}
max = foldr1 compare
where compare a b -- a helper function is defined to handle the condition
| a > b = a
| otherwise = b
{-
ARRAY | ACCUMULATOR
[3 4 2 5] 3
[4 2 5] 3
[2 5] 4
[5] 4
[ ] 5
-}
And here is the imperative pattern that reduce generalizes:
// go
// the input array is of type U because your accumulator doesn't have to be
// the same type as your elements
func reduce[T any, U any](arr []U, fn func(U, T) T, initial T) T {
result := initial
for i := 0; i < len(arr); i++ { // standard for loop syntax used for clarity
result = fn(arr[i], result)
}
return result
}
Best part is, most modern languages that support higher-order functions (Python, Rust, Kotlin, ...) come with a built-in reduce/fold function, so you don't have to implement your own, just have to read documentation :>
Except Go, Go likes to do its own thing.
And that should be it for this part, I figured a break was needed right after the Functors article, so here's one that's a bit more application-oriented. As always, I hope you enjoyed the article, and learned something new!
Top comments (0)