DEV Community

Cover image for How do you Integrate Emissary Ingress with OPA
InfraCloud Technologies profile image Tayyab J
Tayyab J for InfraCloud Technologies

Posted on • Originally published at infracloud.io

How do you Integrate Emissary Ingress with OPA

#opa #emissaryingres #security #api

API gateways play a vital role while exposing microservices. They are an additional hop in the network that the incoming request must go through in order to communicate with the services. An API gateway does routing, composition, protocol translation, and user policy enforcement after it receives a request from client and then reverse proxies it to the appropriate underlying API. As the API gateways are capable of doing the above-mentioned tasks, they can be also configured to send the incoming client requests to an external third-party authorization (authz) server. The fate of the incoming request then depends upon the response from this external authz server to the gateway. This is exactly where Open Policy Agent (OPA) comes into the picture.

There are many open source Kubernetes native API gateways out there like Contour, Kong Gateway, Traefik, Gloo, etc.. In this article, we will be exploring the Emissary Ingress.

Let's dive deep and start understanding more bit about Emissary Ingress.

What's Emissary Ingress?

Emissary Ingress was earlier known as Ambassador API gateway, it is an open source Kubernetes native API gateway and is currently a CNCF Incubation Project. Like many other Kubernetes gateways, Emissary has also been built to work with Envoy Proxy. It is deployed as complete stateless architecture and supports multiple plugins such as traditional SSO authentication protocols (e.g.: OAuth, OpenID Connect), rate limiting, logging, and tracing service. Emissary utilizes its ExtAuth protocol in AuthService resource to configure the authentication and authorization for incoming requests. ExtAuth supports two protocols: gRPC and plain HTTP. For gRPC interface, the external service must implement Envoy's external_auth.proto.

OPA

Open Policy Agent is a well-known general-purpose policy engine and has emerged as a policy enforcer across the stacks be it API gateways, service meshes, Kubernetes, microservice, CICD, or IAC. OPA decouples decision making from policy enforcement such that whenever your software needs to make a decision regarding the incoming requests, it queries OPA. OPA-Envoy extends OPA with a gRPC server that implements the Envoy External Authorization API, thus making itself compatible to be as an external authz server to Emissary.

Integrating Emissary Ingress with OPA

Emissary OPA

The above figure shows highlevel architecture of Emissary and OPA integration. When incoming request from client reaches Emissary, it sends an authorization request to OPA which contains input JSON. OPA evaluates this JSON against the Rego policies provided to it and responds to Emissary, if this result JSON from OPA has allow as true then only the client request is further routed to API or else the request is denied by Emissary and never reaches the API. Now, we will be installing Emissary Ingress and integrate it with OPA for external authorization.

Getting Started

First, we will be needing to start a Minikube cluster. If you don't have Minikube, you can install it from here.

minikube start
Enter fullscreen mode Exit fullscreen mode

Install the Emissary Ingress to the minikube through Helm.

# Add the Repo:
helm repo add datawire https://app.getambassador.io
helm repo update

# Create Namespace and Install:
kubectl create namespace emissary && \
kubectl apply -f https://app.getambassador.io/yaml/emissary/2.2.2/emissary-crds.yaml
kubectl wait --timeout=90s --for=condition=available deployment emissary-apiext -n emissary-system
helm install emissary-ingress --namespace emissary datawire/emissary-ingress && \
kubectl -n emissary wait --for condition=available --timeout=90s deploy -lapp.kubernetes.io/instance=emissary-ingress
Enter fullscreen mode Exit fullscreen mode

Or go to Emissary Ingress Documentation to install it through Kubernetes YAMLs.

Configuring the routing for demo application

Different gateways have their own set of configurations for exposing a service. In Emissary, we need to configure the routing through Mappings and Listeners.

Mapping resource simply tells Emissary which service to redirect the incoming request to. It is highly configurable like Ingress. You can learn more about Mapping resource on Introduction to the Mapping resource page.
We will create a simple Mapping resource which will redirect all the incoming requests to our demo application's service that is demo-svc.

cat <<EOF | kubectl apply -f -
apiVersion: getambassador.io/v3alpha1
kind: Mapping
metadata:
  name: demo-app-mapping  
spec:
  hostname: "*"
  prefix: /
  service: demo-svc
EOF
Enter fullscreen mode Exit fullscreen mode

The Listener resource instructs Emissary where to listen on the network for the incoming request. Here we will create a listener to listen on port 8080 and HTTP protocol and associates with hosts in All namespace . For detailed info visit Listener Docs.

cat <<EOF | kubectl apply -f -
apiVersion: getambassador.io/v3alpha1
kind: Listener
metadata:
  name: demo-app-listener-8080
  namespace: emissary
spec:
  port: 8080
  protocol: HTTP
  securityModel: XFP
  hostBinding:
    namespace:
      from: ALL
EOF
Enter fullscreen mode Exit fullscreen mode

Install the Demo Application

Install a simple echo server as a demo application.

cat <<EOF | kubectl apply -f -
apiVersion: apps/v1
kind: Deployment
metadata:
  name: demo-app
spec:
  replicas: 1
  selector:
    matchLabels:
      app: demo-app
  template:
    metadata:
      labels:
        app: demo-app
    spec:
      containers:
      - name: http-svc
        image: gcr.io/google_containers/echoserver:1.8
        ports:
        - containerPort: 8080
        env:
        - name: NODE_NAME
          valueFrom:
            fieldRef:
              fieldPath: spec.nodeName
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        - name: POD_IP
          valueFrom:
            fieldRef:
              fieldPath: status.podIP
---
apiVersion: v1
kind: Service
metadata:
  name: demo-svc
  labels:
    app: demo-app
spec:
  ports:
  - name: http
    port: 80
    protocol: TCP
    targetPort: 8080
  selector:
    app: demo-app
EOF
Enter fullscreen mode Exit fullscreen mode

Communicate with the demo app at different paths.

minikube service emissary-ingress -n emissary
Enter fullscreen mode Exit fullscreen mode

Note: The above exposing method may not work for macOS users. They can use busybox and configure it to hit the emissary local endpoint instead.

Copy the private URL with target port 80. The URL must be IP 192.168.49.2 followed by a NodePort like http://192.168.49.2:30329. Export the NodePort value to $NODEPORT environment variable and curl to that at paths as follows:

curl http://192.168.49.2:$NODEPORT/public
Enter fullscreen mode Exit fullscreen mode

and

curl http://192.168.49.2:$NODEPORT/secured
Enter fullscreen mode Exit fullscreen mode

OPA has not yet been added to the setup and the above curl requests are directly sent to API without any policy enforcement.

How to Install and Configure OPA?

OPA will be reading the policies fed to it via a configmap. Create the following configmap which contains a policy that allows all incoming requests only through GET method.

cat <<EOF | kubectl apply -n emissary -f  -
apiVersion: v1
kind: ConfigMap
metadata:
  name: demo-policy
data: 
  policy.rego: |-
    package envoy.authz

    default allow = false

    allow {
       input.attributes.request.http.method == "GET" 
    }
EOF
Enter fullscreen mode Exit fullscreen mode

OPA can be configured as an external authorization server via deploying it as an independent deployment or as a sidecar to the emissary-ingress. Here we will add it as a sidecar. Save the following YAML as opa-patch.yaml.

spec:
  template:
    spec:
      containers:
      - name: opa
        image: openpolicyagent/opa:latest-envoy
        ports:
        - containerPort: 9191
        args:
          - "run"
          - "--server"
          - "--addr=0.0.0.0:8181"
          - "--set=plugins.envoy_ext_authz_grpc.addr=0.0.0.0:9191"
          - "--set=plugins.envoy_ext_authz_grpc.query=data.envoy.authz.allow"
          - "--set=decision_logs.console=true"
          - "--ignore=.*"
          - "/policy/policy.rego"
        volumeMounts:
          - mountPath: /policy
            name: demo-policy
            readOnly: true
      volumes:
      - name: demo-policy
        configMap:
          name: demo-policy
Enter fullscreen mode Exit fullscreen mode

patch the emissary-ingress deployment and wait for the all the emissary-ingress pods to restart.

kubectl patch deployment emissary-ingress -n emissary --patch-file opa-patch.yaml
Enter fullscreen mode Exit fullscreen mode

Wait until all the emissary-ingress pods come to Running state with OPA sidecar.

Create the following AuthService. AuthService is a resource which configures Emissary to communicate with an external service for Authn and Authz of incoming request. We are configuring it communicate with OPA on localhost since OPA is deployed as a sidecar.

cat <<EOF | kubectl apply -f -
apiVersion: getambassador.io/v3alpha1
kind: AuthService
metadata:
  name: opa-ext-authservice
  namespace: emissary
  labels:
    product: aes
    app: opa-ext-auth
spec:
  proto: grpc
  auth_service: localhost:9191
  timeout_ms: 5000
  tls: "false"
  allow_request_body: true
  protocol_version: v2
  include_body:
    max_bytes: 8192
    allow_partial: true
  status_on_error:
    code: 504
  failure_mode_allow: false
EOF
Enter fullscreen mode Exit fullscreen mode

Try doing curl now, since the policy accepts requests coming through GET method and there are no restrictions on path, both the request will get a 200 OK response.

curl -i http://192.168.49.2:$NODEPORT/public
curl -i http://192.168.49.2:$NODEPORT/private
Enter fullscreen mode Exit fullscreen mode

Now lets edit the policy to accept incoming requests at path /public only and request to any other path will be denied.

cat <<EOF | kubectl apply -n emissary -f  -
apiVersion: v1
kind: ConfigMap
metadata:
  name: demo-policy
data: 
  policy.rego: |-
    package envoy.authz

    default allow = false

    allow {
       input.attributes.request.http.method == "GET"
       input.attributes.request.http.path == "/public" 
    }
EOF
Enter fullscreen mode Exit fullscreen mode

Now restart the emissary ingress deployment for policy changes to take effect.

kubectl rollout restart deployment emissary-ingress -n emissary
Enter fullscreen mode Exit fullscreen mode

Wait until all the emissary-ingress pods come to Running state after restart.

Now do a curl request at path /public, it will be accepted but at path /private it will be denied by OPA with a 403 response and hence the request will not reach the demo API.

curl -i http://192.168.49.2:$NODEPORT/public
curl -i http://192.168.49.2:$NODEPORT/private
Enter fullscreen mode Exit fullscreen mode

Conclusion

The decision-making about the incoming request from the client to exposed API can be decoupled to OPA as an external authorization server in the Emissary Ingress setup. OPA can be added as a plug-and-play policy enforcer to Emissary and any other gateways supporting the Envoy External Authorization API.

We hope you found this post informative and engaging. Connect with us over Twitter and Linkedin and start a conversation.

References and further reading

Top comments (0)

Read next

nr18 profile image

Compliant infrastructure using infrastructure as code

Joris Conijn -

soul-diallo profile image

Consommer une API avec React JS

Diallo Souleymane -

marianvarga profile image

Why I don't like "v1" in an API URL

marian-varga -

satokenta profile image

Guide to Using the Stable Diffusion API: Testing and Implementation Online

Sato Kenta -