DEV Community

JJ Asghar
JJ Asghar

Posted on • Originally published at jjasghar.github.io on

IBM Cloud and prow setup

Setting up basic prow on the IBM Cloud

Scope

This will tell walk you through specifics on getting prow working on theIBM Cloud. A lot of this is taken from the getting started but there aresome specifics you need for the IBM Cloud. You can also take this as an examplefor a generic Kubernetes Cluster minus the IBM Cloud commands.

Create a Bot

The first thing you should do is create a GitHub bot. It’ll be the account thatwill work from your prow instance. If you don’t know how ore where use thissignup page.

Be sure to add the bot to the repositories you expect it to watch, it should bean administrator/owner, to make sure it can see and do what it needs with therepository. Next create an GitHub Personal Access Token for the bot.

For permissions add the following:Create a personal access token for the GitHub bot account, adding the following scopes

  • Must have the public_repo and repo:status scopes
  • Add the repo scope if you plan on handing private repos
  • Add the admin:org_hook scope if you plan on handling a github org

Place this API key in a file like github_token or the like.

Check out the prow code

Next you need the prow code so you can install it on your Kubernetes Cluster.Go ahead and checkout the code with the following command.

git clone git@github.com:kubernetes/test-infra.git
Enter fullscreen mode Exit fullscreen mode

Change directory into the test-infra directory you created, and continueto the next step.

Create cluster role bindings

You’ll need to create a clusterrolebinding for your user you log in as.On the IBM Cloud, your username is IAM@IBMid as an example below is mine.

export USER="IAM#jja@ibm.com"
kubectl create clusterrolebinding cluster-admin-binding-${USER} --clusterrole cluster-admin --user="${USER}"
Enter fullscreen mode Exit fullscreen mode

This will make sure that when you apply the manifests the prow instance cancreate all the different things that is required on your Kubernetes cluster.

Create a GitHub Secret

Next you need ot cerate your secrets for your instance of prow. Using the followingcommands you can create your main secret to send the Webhook endpoint.Use the github_token you created earlier for the 3rd command.

openssl rand -hex 20 > ./secret
kubectl create secret generic hmac-token --from-file=hmac=./secret
kubectl create secret generic oauth-token --from-file=oauth=../github_token
Enter fullscreen mode Exit fullscreen mode

Apply starter.yaml

Now that you have the majority set up, you need to deploy the actual manifests forprow. The following command will push and start installing your instance.

kubectl apply -f config/prow/cluster/starter.yaml
Enter fullscreen mode Exit fullscreen mode

Now verify the deployments, everything should be in READY state and AVAILABLE.

kubectl get deployments
NAME               READY   UP-TO-DATE   AVAILABLE   AGE
deck               2/2     2            2           2m
hook               2/2     2            2           2m
horologium         1/1     1            1           2m
plank              1/1     1            1           2m
sinker             1/1     1            1           2m
statusreconciler   1/1     1            1           2m
tide               1/1     1            1           2m
Enter fullscreen mode Exit fullscreen mode

Setting up Ingress correctly

Verify the ingress is set up via this next command. The default ingress controller needs some editing, but to make sure that it is “up” the following command willverify it.

kubectl get ingress ing
Enter fullscreen mode Exit fullscreen mode

If everything looks OK, you can now move to change the ingress via the next specific to IBM Cloud steps.Using the IBM cloud you get an ingress controller for free. Run the following commandto get the needed information, where k8s.asgharlabs.io is the name of your cluster:

$ ibmcloud ks cluster get --cluster k8s.asgharlabs.io
Retrieving cluster k8s.asgharlabs.io...
OK

Name:                           k8s.asgharlabs.io
ID:                             brfakb8d0dlm8ddhq91g
State:                          normal
Created:                        2020-06-08T21:15:21+0000
Location:                       dal13
Master URL:                     https://c108.us-south.containers.cloud.ibm.com:31230
Public Service Endpoint URL:    https://c108.us-south.containers.cloud.ibm.com:31230
Private Service Endpoint URL:   -
Master Location:                Dallas
Master Status:                  Ready (1 day ago)
Master State:                   deployed
Master Health:                  normal
Ingress Subdomain:              k8sasgharlabsio-706821-0e3eA_FAKE_HASH1e8aa6fe01f33bfc4-0000.us-south.containers.appdomain.cloud
Ingress Secret:                 k8sasgharlabsio-706821-0e3eA_REALLY_REALLY_FAKE_SECRETf33bfc4-0000
Ingress Status:                 healthy
Ingress Message:                All Ingress components are healthy
Workers:                        3
Worker Zones:                   dal13
Version:                        1.18.3_1514
Creator:                        jja@ibm.com
Monitoring Dashboard:           -
Resource Group ID:              5eb57fd577b64b51beb832c2e9d5287a
Resource Group Name:            Default
Enter fullscreen mode Exit fullscreen mode

Take note of your Ingress Subdomain and Ingress Secret` for the next step.

Updating Ingress to work

Go ahead and take the following yaml and change it for your subdomain and changethe prow to something else if you desire.

`
apiVersion: networking.k8s.io/v1beta1
kind: Ingress
metadata:
namespace: default
name: ing
spec:
tls:

  • hosts:
    • prow.k8sasgharlabsio-706821-0e3eA_FAKE_HASH1e8aa6fe01f33bfc4-0000.us-south.containers.appdomain.cloud secretName: k8sasgharlabsio-706821-0e3eA_REALLY_REALLY_FAKE_SECRETf33bfc4-0000 rules:
  • host: prow.k8sasgharlabsio-706821-0e3eA_FAKE_HASH1e8aa6fe01f33bfc4-0000.us-south.containers.appdomain.cloud http: paths:
    • path: /hook backend: serviceName: hook servicePort: 8888
    • path: / backend: serviceName: deck servicePort: 80 `

Conclusion

Go to that address in a web browser and verify that the “echo-test” job has a green check-mark next to it. At this point you have a prow cluster that is ready to start receiving GitHub events!

Latest comments (0)