Refresh tokens are commonly used in OAuth based authorization scenarios. The purpose of refresh token is to retrieve new id/access token from authorization server, without user interaction. In simple scenarios, once access token expires, user is forced to reauthenticate in order to get new token. With refresh tokens, expired access token can be replaced with fresh one in the background, without user interaction.
Using refresh tokens improves application security. One might think it would be just enough to extend an expiration time of id/access token. By making it long lived, user avoids often re-authentication. This approach may put your application at greater risk of token being intercepted and used by attacker.
Once id/access token is retrieved from Auth server, it can be used until it expires against resource server (e.g. personal calendar service). Risk of token interception and malicious usage increases as the same long-lived id/access token is used over and over again.
With short-lived access token, risk of its interception still exists, however their malicious usage can be minimized as they shortly expire and cannot be used against resource server anymore. In Azure AD B2C default access token lifetime is 60 minutes and can be configured in a range of 5 minutes to 24 hours.
Besides external risks long-lived access tokens, expose resources to internal risks. Once user access to specific resource is changed or revoked, it will be reflected only in access token generated after this change. With long lived access tokens user might keep the access to the resource for long time, even if it was changed or revoked in the meantime.
Table of contents
- Refreshing tokens by the book
- Refresh tokens settings in Azure AD B2C
- Refresh token revocation
- Customizing refresh token flow
Refreshing tokens by the book
Below diagram presents how refresh token can be used in Authorization Code Grant flow. 
In order to get refresh token from Azure AD B2C authorization server following request needs to be sent to /token endpoint
POST https://{tenant_id}.b2clogin.com/{tenant_id}.onmicrosoft.com/{policy}oauth2/v2.0/token
?grant_type=refresh_token
&client_secret={client_secret}
&client_id={client_id}
&scope=offline_access //in addition, openid or specific access can be specified
&refresh_token={refresh_token}
Auth server response includes new refresh token plus access or id token (depending of specified request scope).
Note 1
Authorization code grant flow is presented as example. Note that refresh token can be used in OAuth flows other than that, except implicit grant flow.
Note 2
Refresh token is encrypted during generation, and decrypted by Auth server once it is used. Its payload is transparent for client application and can be understood solely by Auth server.
Refresh tokens settings in Azure AD B2C
Azure AD B2C governs refresh tokens and controls their behavior. Refresh token can be configured using 3 properties
- refresh_token_lifetime_secs – describes how long single refresh token is valid. Once refresh token lifetime expires, it cannot be used to gather new refresh token and will be refused by Auth server. Minimum value is 24h, maximum is 90 days.
- rolling_refresh_token_lifetime_secs – describes time frame in which token refreshing can be continued. Refresh token can be used to get new refresh token. New refresh token can be used to get another refresh token etc. It creates a chain. This property specifies maximum length of refresh token chain. Minimum value is 24h, maximum is 365 days.
- allow_infinite_rolling_refresh_token – once this property is set to true, refresh token chain is not time limited.
These properties can be configured for both User Flows and Custom Policies (Identity Experience Framework).
User Flows
User Flows allows to configure refresh token properties under Settings/Token Lifetime 
Custom Policies
Custom Policies takes advantage of extending OpenId Connect TechnicalProfile. Azure AD B2C custom policies starter pack implements TrustFrameworkBase custom policy, which defines JwtIssuer - OpenId Connect TechnicalProfile. It can be inherited and extended with refresh token settings like below
<ClaimsProvider>
<DisplayName>Token Issuer</DisplayName>
<TechnicalProfiles>
<TechnicalProfile Id="JwtIssuer">
<Metadata>
<!-- 86400s = 24h -->
<Item Key="refresh_token_lifetime_secs">86400</Item>
<!-- 172800s = 48h -->
<Item Key="rolling_refresh_token_lifetime_secs">172800</Item>
<Item Key="allow_infinite_rolling_refresh_token">false</Item>
</Metadata>
</TechnicalProfile>
</TechnicalProfiles>
</ClaimsProvider>
Refresh token lifetime configuration is reflected in response from /token endpoint. Response includes refresh_token_expires_in property that corresponds with refresh_token_lifetime_secs setting. Thanks to that application can request new refresh token before current expires.
Refresh token revocation
Azure AD B2C does not provide OAuth /revocation endpoint which is normally used to inform the Auth server specific token should not be accepted anymore.
Token revocation can be achieved in three different ways using
1. Using Powershell
Revoke-AzureADUserAllRefreshToken -ObjectId <String>
2. Using Graph API
POST https://graph.windows.net/myorganization/users/{user_id}/invalidateAllRefreshTokens?api-version
3. Using Azure portal
Revoke session button is available in B2C tenant user settings 
This solution doesn’t invalidate refresh token directly. It is designed to revoke user session, not refresh tokens. Though it is possible to implement a custom logic which stops refresh token from being used, after user session is revoked. Specific implementation is described in customizing refresh token flow section.
Azure AD B2C revocation scenarios
Azure AD B2C token revocation possibilities seem to be designed for administrator usage scenarios. For example, when user loss device, administrator can revoke tokens, so reauthentication will be required.
This approach doesn’t work well with scenarios, where users need to revoke their own tokens. However, it is valid requirement considering security reasons. After user logs out from application, refresh tokens are usually removed from application memory but they are not invalidated on Auth Server and still can be used. It creates a risk of malicious usage of intercepted refresh tokens.
Revocation and access tokens
Refresh token revocation does not invalidate the access token. User does not lose the access immediately. Access tokens are valid until they expire. Once application gets an access token, there is no way to prevent application from accessing resource with this access token. Refresh token revocation prevents from acquiring new id/access tokens without reauthentication.
One time use refresh token
Staying in the context of security, there are recommendation for Auth servers to generate one time use refresh tokens. Refresh token should be used only once to request new access and refresh tokens. New refresh token, can be used only once as well. This approach mitigates refresh token usage risk, even if it is intercepted by attacker. Though Azure AD B2C by default allows to use the same refresh token multiple times.
Customizing refresh token flow
Customization of token claims can be implemented using Azure AD B2C custom policies. Claims generation process can be customized, when the tokens are requested specifically using refresh token.
This functionality gives variety of possibilities, for example
- Refresh user claims in returned id token. Some claims might have changed after they were initially generated during sign in process.
- Call external API to check if user, who is trying to refresh the token, is on some blacklist. Interrupt token generation if that is the case.
- Check if user’s refresh token was revoked.
Example below, presents how to check if user session was revoked, before refreshing the token.
After /token endpoint is requested with with grant_type=refresh_token, Azure AD B2C triggers UserJourney, referenced in RelyingParty as an Endpoint with Id=Token.
<RelyingParty>
<DefaultUserJourney ReferenceId="SignUpOrSignIn" />
<Endpoints>
<Endpoint Id="Token" UserJourneyReferenceId="RedeemRefreshToken" />
</Endpoints>
...
</RelyingParty>
RedeemRefreshToken Journey is implemented in Azure AD B2C starter pack in TrustFrameworkBase.xml policy file. (Starter pack is recommended by Azure as a foundation for Custom Policies) Of course, you can extend, customize or use different UserJourney instead.
RedeemRefreshToken UserJourney includes three steps,
<UserJourney Id="RedeemRefreshToken">
<PreserveOriginalAssertion>false</PreserveOriginalAssertion>
<OrchestrationSteps>
<OrchestrationStep Order="1" Type="ClaimsExchange">
<ClaimsExchanges>
<ClaimsExchange Id="RefreshTokenSetupExchange" TechnicalProfileReferenceId="RefreshTokenReadAndSetup" />
</ClaimsExchanges>
</OrchestrationStep>
<!-- Extra steps can be added before or after this step for REST API or claims transformation calls-->
<OrchestrationStep Order="2" Type="ClaimsExchange">
<ClaimsExchanges>
<ClaimsExchange Id="CheckRefreshTokenDateFromAadExchange" TechnicalProfileReferenceId="AAD-UserReadUsingObjectId-CheckRefreshTokenDate" />
</ClaimsExchanges>
</OrchestrationStep>
<OrchestrationStep Order="3" Type="SendClaims" CpimIssuerTechnicalProfileReferenceId="JwtIssuer" />
</OrchestrationSteps>
</UserJourney>
which utilize following TechnicalProfiles
RefreshTokenReadAndSetup – it just returns refresh token parameters like objectId and refreshTokenIssuedOnDateTime in output claims. Before executing refresh token UserJourney, refresh token claims seems to be already preloaded into claims bag. (It is different approach comparing to UserInfoEndpoint implementation, where dedicated technical profile loads access token claims into claims bag explicitly).
-
AAD-UserReadUsingObjectId-CheckRefreshTokenDate – retrieves user information stored in azure AD. Since it uses base AAD-UserReadUsingObjectId TechnicalProfile, basic user data will updated in returned id/access token. Additionally, refreshTokensValidFromDateTime property is read from AD. When user’s refresh token is revoked refreshTokensValidFromDateTime is set to time it happened.
<TechnicalProfile Id="AAD-UserReadUsingObjectId-CheckRefreshTokenDate"> <OutputClaims> <OutputClaim ClaimTypeReferenceId="refreshTokensValidFromDateTime" /> <OutputClaim ClaimTypeReferenceId="displayName" /> </OutputClaims> <OutputClaimsTransformations> <OutputClaimsTransformation ReferenceId="AssertRefreshTokenIssuedLaterThanValidFromDate" /> </OutputClaimsTransformations> <IncludeTechnicalProfile ReferenceId="AAD-UserReadUsingObjectId" /> </TechnicalProfile>By comparing refreshTokensValidFromDateTime property with refreshTokenIssuedOnDateTime it is possible to validate if used refresh token should be accepted by auth server. This logic is implemented by output claim transformation. Once refreshTokensValidFromDateTime is greater that refreshTokenIssuedOnDateTime, exception is thrown and UserJourney is interrupted. In that case, Auth server returns 400-Bad request http response, including body:
{ "error": "invalid_grant", "error_description": "AADB2C90129: The provided grant has been revoked. Please reauthenticate and try again.Correlation ID: xxxxxx-xxxx-xxxx-xxxx-xxxxxxxx\r\nTimestamp: xxxx-xx-xx xx:xx:xxx\r\n" } JwtIssuer - OpenIdConnect technical profile that issues requested token and returns it to relaying party. Refresh token properties described above, in Refresh tokens properties in Azure AD B2C section, can be specified in its definition.
Top comments (0)