DEV Community

Cover image for Some helpful syntax/conventions in Rails to you 🍵🍵
minhtienvu
minhtienvu

Posted on

Some helpful syntax/conventions in Rails to you 🍵🍵

Some helpful syntax/conventions in Rails to you

Hi guys, Tien again, after I read some articles and my hands-on experience in some Rails projects. I write this post to summarize some helpful conventions that can improve your Rails knowledge.

Sip a cup of tea and enjoy it ❤️ Have fun guys!!

1. Use _ in the console to get the value of the previous command in your console

YOUR CONSOLE

a = [1,2,3,4,5]

User.where(id: _)
=> SELECT `users`.* FROM `users` WHERE `users`.`id` IN (1, 2, 3, 4, 5)
Enter fullscreen mode Exit fullscreen mode

2. Existence Check Shorthand

Use &&= to set variables that may or may not exist. Using &&= will change the value only if it exists, removing the need to check its existence with if. Use &&= to set variables that may or may not exist. Using &&= will change the value only if it exists, removing the need to check its existence with if.

# bad
if something
  something = something.downcase
end

# bad
something = something ? something.downcase : nil

# ok
something = something.downcase if something

# good
something = something && something.downcase

# better
something &&= something.downcase
Enter fullscreen mode Exit fullscreen mode

3. map/find/select/reduce/include?/size

Prefer map over collect, find over detect, select over find_all, reduce over inject, include? over member? and size over length. This is not a hard requirement; if the use of the alias enhances readability, it’s ok to use it. The rhyming methods are inherited from Smalltalk and are not common in other programming languages. The reason the use of select is encouraged over find_all is that it goes together nicely with reject and its name is pretty self-explanatory.

3.1. count vs size

Don’t use count as a substitute for size. For Enumerable objects other than Array it will iterate the entire collection in order to determine its size.

# bad
some_hash.count

# good
some_hash.size
Enter fullscreen mode Exit fullscreen mode

3.2. flat_map

Use flat_map instead of map + flatten. This does not apply for arrays with a depth greater than 2, i.e. if users.first.songs == ['a', ['b','c']], then use map + flatten rather than flat_map. flat_map flattens the array by 1, whereas flatten flattens it all the way.

# bad
all_songs = users.map(&:songs).flatten.uniq

# good
all_songs = users.flat_map(&:songs).uniq
Enter fullscreen mode Exit fullscreen mode

4. Conditional Variable Initialization Shorthand

Use ||= to initialize variables only if they’re not already initialized.

# bad
name = name ? name : 'Bozhidar'

# bad
name = 'Bozhidar' unless name

# good - set name to 'Bozhidar', only if it's nil or false
name ||= 'Bozhidar'
Enter fullscreen mode Exit fullscreen mode
**NOTE: Don’t use ||= to initialize boolean variables. 
Consider what would happen if the current value happened to be false.**

# bad - would set enabled to true even if it was false
enabled ||= true

# good
enabled = true if enabled.nil?
Enter fullscreen mode Exit fullscreen mode

5. Underscores in Numerics

Add underscores to large numeric literals to improve their readability.

# bad - how many 0s are there?
num = 1000000

# good - much easier to parse for the human brain
num = 1_000_000
Enter fullscreen mode Exit fullscreen mode

6. Convert a range to an array

I use some below syntax to convert a range to an array. I hope that you can apply it

(1..10).to_a
=> [1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
Enter fullscreen mode Exit fullscreen mode

7. Get array characters from a string

# bad
string.split(//)
string.split('')

# good
string.chars
Enter fullscreen mode Exit fullscreen mode

8. Prefer to use Time.current, Date.current or DateTime.current rather than Time.now, Date.now, DateTime.now

.current will use the Rails environment is set to, .now will use server's timezone (Rails.application.config.time_zone). If it's not set, then .current
 will be the same as .now .Be careful when use them to avoid conflict and unmatched.

Time.current
=> Returns Time.zone.now when Time.zone or config.time_zone are set,
otherwise just returns Time.now.

DateTime.current
=> Returns Time.zone.now.to_datetime when Time.zone or config.time_zone are set,
otherwise returns Time.now.to_datetime.
Enter fullscreen mode Exit fullscreen mode

9. Predicate Methods

Prefer the use of predicate methods to explicit comparisons with ==. Numeric comparisons are OK.

# bad
if x % 2 == 0
end

if x % 2 == 1
end

if x == nil
end

# good
if x.even?
end

if x.odd?
end

if x.nil?
end

if x.zero?
end

if x == 0
end
Enter fullscreen mode Exit fullscreen mode

10. Hash#values_at

Use Hash#values_at when you need to retrieve several values consecutively from a hash.

# bad
email = data['email']
username = data['nickname']

# good
email, username = data.values_at('email', 'nickname')
Enter fullscreen mode Exit fullscreen mode

11. Proc Application Shorthand

Use the Proc call shorthand when the called method is the only operation of a block.

# bad
names.map { |name| name.upcase }

# good
names.map(&:upcase)
Enter fullscreen mode Exit fullscreen mode

12. Single-line Blocks Delimiters

Prefer {…} over do…end for single-line blocks. Avoid using {…} for multi-line blocks (multi-line chaining is always ugly). Always use do…end for "control flow" and "method definitions" (e.g. in Rakefiles and certain DSLs). Avoid do…end when chaining.

names = %w[Bozhidar Filipp Sarah]

# bad
names.each do |name|
  puts name
end

# good
names.each { |name| puts name }

# bad
names.select do |name|
  name.start_with?('S')
end.map { |name| name.upcase }

# good
names.select { |name| name.start_with?('S') }.map(&:upcase)
Enter fullscreen mode Exit fullscreen mode

Some will argue that multi-line chaining would look OK with the use of {…}, but they should ask themselves - is this code really readable and can the blocks' contents be extracted into nifty methods?

13. Defining Class Methods

Use def self.method to define class methods. This makes the code easier to refactor since the class name is not repeated.

class TestClass
  # bad
  def TestClass.some_method
    # body omitted
  end

  # good
  def self.some_other_method
    # body omitted
  end

  # Also possible and convenient when you
  # have to define many class methods.
  class << self
    def first_method
      # body omitted
    end

    def second_method_etc
      # body omitted
    end
  end
end
Enter fullscreen mode Exit fullscreen mode

14. Hash#each

Use Hash#each_keyinstead of Hash#keys.each and Hash#each_value instead of Hash#values.each

# bad
hash.keys.each { |k| p k }
hash.values.each { |v| p v }
hash.each { |k, _v| p k }
hash.each { |_k, v| p v }

# good
hash.each_key { |k| p k }
hash.each_value { |v| p v }
Enter fullscreen mode Exit fullscreen mode

15. Hash#fetch

Use Hash#fetch when dealing with hash keys that should be present.

heroes = { batman: 'Bruce Wayne', superman: 'Clark Kent' }
# bad - if we make a mistake we might not spot it right away
heroes[:batman] # => 'Bruce Wayne'
heroes[:supermann] # => nil

# good - fetch raises a KeyError making the problem obvious
heroes.fetch(:supermann)
Enter fullscreen mode Exit fullscreen mode

16. Hash#fetch defaults

Introduce default values for hash keys via Hash#fetch as opposed to using custom logic.

batman = { name: 'Bruce Wayne', is_evil: false }

# bad - if we just use || operator with falsy value we won't get the expected result
batman[:is_evil] || true # => true

# good - fetch works correctly with falsy values
batman.fetch(:is_evil, true) # => false
Enter fullscreen mode Exit fullscreen mode

17. Use Hash Blocks

Prefer the use of the block instead of the default value in Hash#fetch if the code that has to be evaluated may have side effects or be expensive.

batman = { name: 'Bruce Wayne' }

# bad - if we use the default value, we eager evaluate it
# so it can slow the program down if done multiple times
batman.fetch(:powers, obtain_batman_powers) # obtain_batman_powers is an expensive call

# good - blocks are lazy evaluated, so only triggered in case of KeyError exception
batman.fetch(:powers) { obtain_batman_powers }
Enter fullscreen mode Exit fullscreen mode

18. Hash#transform_keys and Hash#transform_values

Prefer transform_keys or transform_values over each_with_object or map when transforming just the keys or just the values of a hash.

# bad
{a: 1, b: 2}.each_with_object({}) { |(k, v), h| h[k] = v * v }
{a: 1, b: 2}.map { |k, v| [k.to_s, v] }.to_h

# good
{a: 1, b: 2}.transform_values { |v| v * v }
{a: 1, b: 2}.transform_keys { |k| k.to_s }
Enter fullscreen mode Exit fullscreen mode

19. reverse_each

Prefer reverse_each to reverse.each because some classes that include Enumerable will provide an efficient implementation. Even in the worst case where a class does not provide a specialized implementation, the general implementation inherited from Enumerable will be at least as efficient as using reverse.each.

# bad
array.reverse.each { ... }

# good
array.reverse_each { ... }
Enter fullscreen mode Exit fullscreen mode

20. Unused Variables Prefix

Prefix with _ unused block parameters and local variables. It’s also acceptable to use just _
 (although it’s a bit less descriptive). This convention is recognized by the Ruby interpreter and tools like RuboCop will suppress their unused variable warnings.

# bad
result = hash.map { |k, v| v + 1 }

def something(x)
  unused_var, used_var = something_else(x)
  # some code
end

# good
result = hash.map { |_k, v| v + 1 }

def something(x)
  _unused_var, used_var = something_else(x)
  # some code
end

# good
result = hash.map { |_, v| v + 1 }

def something(x)
  _, used_var = something_else(x)
  # some code
end
Enter fullscreen mode Exit fullscreen mode

❤️ Thank you for reading and see you ❤️
Follow me: https://tienvm.com/
Donate me: tienvm.com/donate

Top comments (0)