DEV Community


Writing a Image Processing Codes from Python on Scratch

qviper profile image Viper ・5 min read

Writing a Image Processing Codes from Python on Scratch

1.1 What am i using?

  • Numpy for array operations
  • imageio builtin library for reading image
  • warnings to show warning
  • matplotlib for visualizing

1.2 What this blog includes?

  • Converting an image into Grayscale from RGB.
  • Convolution of an image using different kernels.

2 Steps

  • Initializing a ImageProcessing class.
  • Adding a read method
  • Adding a show method
  • Adding color converison method
  • Adding a convolution method

Initializing a ImageProcessing class

class ImageProcessing:
    def __init__(self):
        self.readmode = {1 : "RGB", 0 : "Grayscale"} # this dictionary will hold readmode values
Enter fullscreen mode Exit fullscreen mode

Adding a read method

    def read_image(self, location = "", mode = 1):
            Uses imageio on back.
            location: Directory of image file.
            mode: Image readmode{1 : RGB, 0 : Grayscale}.
        img = imageio.imread(location)
        if mode == 1:
            img = img
        elif mode == 0:
            img = 0.21 * img[:,:,0] + 0.72 * img[:,:,1] + 0.07 * img[:,:,2]
        elif mode == 2:
            raise ValueError(f"Readmode not understood. Choose from {self.readmode}.")
        return img
Enter fullscreen mode Exit fullscreen mode
  • This method only wraps the imageio, but i am applying a concept of RGB to GRAYSCALE conversion.
  • By default, imageio reads on RGB format.
  • A typical RGB to GRAYSCALE can be done on below concepts (taken from):-
    • Average Method:
      Grayscale=R+G+B3Grayscale = \frac{R + G + B}{3}

      All channels are given 33% contribution.

    • Weighted Method of luminosity method
      Grayscale=0.3R+0.59G+0.11BGrayscale = 0.3*R + 0.59*G + 0.11*B

      Red channel have 30%, Green have 59 and Blue have 11% contribution.\
      But I am using different version of method (taken from).

  • If user enter different mode, then raise error.

Adding a show method

def show(self, image, figsize=(5, 5)):
        Uses Matplotlib.pyplot.
        image: A image to be shown.
        figsize: How big image to show. From plt.figure()
    fig = plt.figure(figsize=figsize)
    im = image
    plt.imshow(im, cmap='gray')
Enter fullscreen mode Exit fullscreen mode

Nothing to say here, docstring is enough.

Color conversion

    def convert_color(self, img, to=0):
        if to==0:
            return  0.21 * img[:,:,0] + 0.72 * img[:,:,1] + 0.07 * img[:,:,2]
            raise ValueError("Color conversion can not understood.")
Enter fullscreen mode Exit fullscreen mode

I have still have not thought about grayscale to RGB conversion. But even using OpenCV cv2.cvtColor(img, cv2.COLOR_GRAY2BGR), we can not get complete BGR image.

Adding a convolution method

    def convolve(self, image, kernel = None, padding = "zero", stride=(1, 1), show=False, bias = 0):
            image: A image to be convolved.
            kernel: A filter/window of odd shape for convolution. Used Sobel(3, 3) default.
            padding: Border operation. Available from zero, same, none. 
            stride: How frequently do convolution?
            show: whether to show result
            bias: a bias term(used on Convolutional NN)
        if len(image.shape) > 3:
            raise ValueError("Only 2 and 3 channel image supported.")
        if type(kernel) == type(None):
            warnings.warn("No kernel provided, trying to apply Sobel(3, 3).")
            kernel = np.array([[1, 0, -1],
                              [1, 0, -1],
                              [1, 0, -1]])
            kernel += kernel.T
        kshape = kernel.shape
        if kshape[0] % 2 != 1 or kshape[1] % 2 != 1:
            raise ValueError("Please provide odd length of 2d kernel.")
        if type(stride) == int:
                 stride = (stride, stride)
        shape = image.shape
        if padding == "zero":
            zeros_h = np.zeros(shape[1]).reshape(-1, shape[1])
            zeros_v = np.zeros(shape[0]+2).reshape(shape[0]+2, -1) 
            padded_img = np.vstack((zeros_h, image, zeros_h)) # add rows
            padded_img = np.hstack((zeros_v, padded_img, zeros_v)) # add cols
            image = padded_img
            shape = image.shape   
        elif padding == "same":
            h1 = image[0].reshape(-1, shape[1])
            h2 = image[-1].reshape(-1, shape[1])
            padded_img = np.vstack((h1, image, h2)) # add rows
            v1 = padded_img[:, 0].reshape(padded_img.shape[0], -1)
            v2 = padded_img[:, -1].reshape(padded_img.shape[0], -1)
            padded_img = np.hstack((v1, padded_img, v2)) # add cols
            image = padded_img
            shape = image.shape
        elif padding == None:
        rv = 0
        cimg = []
        for r in range(kshape[0], shape[0]+1, stride[0]):
            cv = 0
            for c in range(kshape[1], shape[1]+1, stride[1]):
                chunk = image[rv:r, cv:c]
                soma = (np.multiply(chunk, kernel)+bias).sum()
                    chunk = int(soma)
                    chunk = int(0)
                if chunk < 0:
                    chunk = 0
                if chunk > 255:
                    chunk = 255
        cimg = np.array(cimg, dtype=np.uint8).reshape(int(rv/stride[0]), int(cv/stride[1]))
        if show:
            print(f"Image convolved with \nKernel:{kernel}, \nPadding: {padding}, \nStride: {stride}")
        return cimg
Enter fullscreen mode Exit fullscreen mode

What is happening above?

  • First the kernel is checked, if not given, used from sobel 3 by 3
  • If the given kernel shape is not odd, error is raised.
  • For padding, numpy stack methods are used.
  • Initialize an empty list to store convoluted values
  • For convolution,
    • we loop through every rows in step of kernel's row upto total img rows
    • loop through every cols in step of kernel's col up to total img cols
    • get a current chunk of image and multiply its elements with the kernel's elements
    • if current sum is geater than 255, set it 255
    • append sum to list
  • Finally convert the list into array then into right shape.

Recall the mathematics of Convolution Operation

g(x,y)=f(x,y)h(x,y) g(x, y) = f(x,y) * h(x,y)

Where f is a image function and h is a kernel or mask or filter.

What happens on convolution can be clear from the matrix form of operation.
Lets take a image of 5X5 and kernel of 3X3 sobel y.
(Using KaTex for Matrix was hard so I am posting image instead.)

We have to move the kernel over the each and every pixels of the image from top left to bottom. Placing a kernel over a image and taking a elementwise matrix multiplication of the kernel and chunk of image of the kernel shape. For most cases, we use odd shaped kernel. By using odd shaped kernel, we can place a center of kernel to the center of image chunk.

Now we try to start from the top right pixel, but since our kernel is 3 by 3, we don't have any pixels that will be facing the 1st row of kernel. So we have to work with the concept of padding or we will loose those pixels of the border. For the sake of simplicity, lets take a zero padding.


Now the first chunk of image will be:

Now the convolution operation:

Similarly, the final image will be like below after sliding through row then column:


But we will set 255 to all values which exceeds 255.

A better visualisation of a convolution operation can be seen by below gif(i don't own this gif):-

Finally, visualizing our convolutated image:-

    ip = ImageProcessing()
    img = np.array([1, 10, 11, 200, 30, 12, 200, 152, 223, 60, 100, 
                190, 11, 20, 10, 102, 207, 102, 223, 50, 18, 109, 117, 200, 30]).reshape(5, 5)
    cv = ip.convolve(img)
Enter fullscreen mode Exit fullscreen mode

If we printed the output of this code, i.e. cv, then we will see the array just like above.

I have written a code to do Convolution Neural Network from scratch using Python too, please read it here.

Discussion (0)

Editor guide