DEV Community

Cover image for Step By Step Guide To Create A Twitter Bot Using Nodejs Hosted On DigitalOcean For Free
Sahil Jain
Sahil Jain

Posted on • Originally published at webbrainsmedia.com

Step By Step Guide To Create A Twitter Bot Using Nodejs Hosted On DigitalOcean For Free

#node #twitter #ssh

Original Post Link => https://webbrainsmedia.com/blogs/twitter-bot-using-nodejs-hosted-on-digitalocean

Recently, I posted the tweet shown below. The special thing about this tweet is that when the like or retweet counter gets updated my profile name will also get updated to show the current likes and retweet value. This is done by the Nodejs script running behind the scene on a DigitalOcean Droplet.

To see this in action you need to like and retweet the below tweet (It will take a minute to reflect the changes in the profile name)

So, In this article i will explain all the steps that i took to create this twitter bot from scratch and also explain how you can host it on the DigitalOcean Droplet for free.

Steps:

Firstly, If you are new to DigitalOcean. Then, you need to create a new digitalocean account using this Link.

Complete the simple signup process and visit the DigitalOcean dashboard by clicking on the DigitalOcean Logo. After that click on the 'New Project' option to create a new project.

DigitalOcean New Project

After creation, You will see your project been added on the left sidebar. Now, click on the 'Get Started with a Droplet' Button to create your new Droplet (DigitalOcean Droplets are simple Linux-based virtual machines (VMs) that run on top of virtualized hardware)

DigitalOcean New Project Added

After this, You will be asked to configure your droplet. For image selection we will start with a fresh 'Ubuntu 20.04(LTS)x64' image.

DigitalOcean Choose Image

Now, Select the Basic $5 Plan for our Droplet.

DigitalOcean Droplet Plan

Now, Scroll down directly to 'Authentication' Section and select SSH Keys as the Authentication Method. Click on 'New SSH Key' Button to add a new SSH Key. After clicking, A modal will open asking for your public SSH key.

DigitalOcean Add New SSH Key

To create a new SSH Key pair just type the below command in your terminal.

ssh-keygen -o -t rsa -C "your@email.com"
Enter fullscreen mode Exit fullscreen mode

(Remember to replace the comment with your own email)

After That, you will be asked for the path to save the keys. hit enter to accept the default location.

Generating public/private rsa key pair.
Enter file in which to save the key (/home/sj/.ssh/id_rsa):
Enter fullscreen mode Exit fullscreen mode

Next, you will get an option to provide the passphrase to make your keys more secure. This is optional and you can skip it by pressing enter two times.

Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Enter fullscreen mode Exit fullscreen mode

Finally, After your keys are generated. You will see the below message.

Your identification has been saved in /home/sj/.ssh/id_rsa
Your public key has been saved in /home/sj/.ssh/id_rsa.pub
The key fingerprint is:
SHA256:40XYRaLv66J9UVk1wrMVgMFQh0/BaV5OhJG2ZsOsbEU your@email.com
The key's randomart image is:
+---[RSA 3072]----+
|         .=+O*O=o|
|         + *.Eo+.|
|        o o XoO  |
|         o  o% . |
|        S +.= .  |
|       . +.+     |
|        . o.     |
|       .. ..     |
|      ...+o      |
+----[SHA256]-----+
Enter fullscreen mode Exit fullscreen mode

So, we have generated our SSH key pairs. Now, we can access content of our public key by using cat command.

cat ~/.ssh/id_rsa.pub
Enter fullscreen mode Exit fullscreen mode

Output:

ssh-rsa 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 your@email.comcat ~/.ssh/id_rsa.pub
Enter fullscreen mode Exit fullscreen mode

Copy your public SSH key and paste it in the 'SSH key content' Box and also give a name to your key. I am going to give 'Droplet SSH' Name to my key for this tutorial. After that click on 'Add SSH Key' Button.

DigitalOcean Added New SSH Key

Select your new key.

DigitalOcean Select New SSH Key

Next, Under 'Choose a hostname' Section give your droplet a name that you want. I am going to call it 'twitter-bot' for this tutorial.

DigitalOcean Hostname

Now, You are all set to go. Just click on the 'Create Droplet' Button and wait for DigitalOcean to create your droplet.

DigitalOcean Droplet

Okay, Now to access your droplet via SSH, copy your ipv4 address. In my case it is 206.189.183.112 and in your terminal type the below command with your ipv4 address.

ssh root@206.189.183.112
Enter fullscreen mode Exit fullscreen mode

After that, You will be asked if you trust the host. Just enter 'yes' and click enter. If you see the prompt then, you have successfully logged in to your droplet.

DigitalOcean Droplet Login

Okay, Now will create our new user in ubuntu. We can do that by typing the below command.

adduser wbm
Enter fullscreen mode Exit fullscreen mode

You will be prompted for a new password. Give a new password, retype it and click enter.

Next, you will be asked some user information. You can fill it if you want otherwise, Just click enter. Finalise the information by typing 'y' and clicking enter.

After this, You will get back to your root prompt again. To verify your new user just type the below command.

id wbm
Enter fullscreen mode Exit fullscreen mode

Output:

uid=1000(wbm) gid=1000(wbm) groups=1000(wbm)
Enter fullscreen mode Exit fullscreen mode

Now, You will notice that our user is not in the sudo group. We want to put our user in sudo to run things as administrator. So, to do thar type the below command with your username.

usermod -aG sudo wbm
Enter fullscreen mode Exit fullscreen mode

Now, If you run id wbm Command. You will see your user in sudo group.

uid=1000(wbm) gid=1000(wbm) groups=1000(wbm),27(sudo)
Enter fullscreen mode Exit fullscreen mode

Okay, Now to login with the user just type the below command.

sudo su - wbm
Enter fullscreen mode Exit fullscreen mode

Afer this, You will see the prompt being changed to wbm@twitter-bot. You can also double check by typing the below command.

whoami
Enter fullscreen mode Exit fullscreen mode

Output:

wbm
Enter fullscreen mode Exit fullscreen mode

Now, Logging into our user like this is a very cumbersome process. To directly login into our user via SSH we need to authorize our SSH Key with our new user. For that we need to first make a directory by running the below command.

mkdir ~/.ssh
Enter fullscreen mode Exit fullscreen mode

Next, Change the permission to 700 by typing the below command.

chmod 700 ~/.ssh
Enter fullscreen mode Exit fullscreen mode

Now, We will create a new file named 'authorized_keys'.

nano ~/.ssh/authorized_keys
Enter fullscreen mode Exit fullscreen mode

'authorized_keys' file will open up in the nano editor. Now we just need to paste our SSH Key into it that we previously saved while configuring our droplet with name 'Droplet SSH' (Make sure that whole key comes in single line without spaces).

DigitalOcean User SSH Key Add

After pasting, Press ctrl + x and y to save and exit.

Now, Change the permission of the file to 600 by typing the below command.

chmod 600 ~/.ssh/authorized_keys
Enter fullscreen mode Exit fullscreen mode

Now, Restart the SSH Service to apply the changes.

sudo service ssh restart
Enter fullscreen mode Exit fullscreen mode

Okay, Now we are all done. To test it out, Close your terminal and start a new one. Then, type the below command to login to the user via SSH.

ssh wbm@206.189.183.112
Enter fullscreen mode Exit fullscreen mode

So, Now you must be logged into your droplet with your user. Next step is to install Nodejs on our server. To do that run the below commands.

curl -sL https://deb.nodesource.com/setup_14.x | sudo -E bash -
sudo apt-get install -y nodejs
Enter fullscreen mode Exit fullscreen mode

After this, Nodejs is successfully installed on our server. We can run node -v to see the node version and confirm the installation.

Okay, Now lets proceed to create our bot application. For that first create a directory in which we will store our code.

mkdir ~/twitter-bot
Enter fullscreen mode Exit fullscreen mode

Now, cd into the directory.

cd twitter-bot/
Enter fullscreen mode Exit fullscreen mode

Initialize Npm. This will create a package.json file.

npm init -y
Enter fullscreen mode Exit fullscreen mode

Now, create a new file named 'server.js'

touch server.js
Enter fullscreen mode Exit fullscreen mode

Open server.js using nano editor.

sudo nano server.js
Enter fullscreen mode Exit fullscreen mode

Paste the bot script in the editor. You can also get the application files from the Github Repo .

const Twitter = require('twitter-lite')
let cron = require('node-cron');

const client = new Twitter({
    consumer_key: "paste_your_key",
    consumer_secret: "paste_your_key",
    access_token_key: "paste_your_key",
    access_token_secret: "paste_your_key"
});

const getTweetLikesAndUpdateProfile = async () => {
    const tweetData = await client.get("statuses/show", {
        id: "1315114170933628929"
    }).catch(err => {
        console.log(err)
    })

    if ("favorite_count" in tweetData && "retweet_count" in tweetData) {
        const name = `SJ - this tweet has ${tweetData.favorite_count} likes and ${tweetData.retweet_count} retweets`
        await client.post("account/update_profile", {
            name
        }).catch(err => {
            console.log(err)
        })
    }

}

cron.schedule('*/1 * * * *', () => {
    console.log('running a task every 1 minutes');
    getTweetLikesAndUpdateProfile()
});

console.log('started')
Enter fullscreen mode Exit fullscreen mode

After this, you just need to replace the given id with the id of the tweet that you want to track (You can easily get the id of the tweet by visiting the tweet on twitter and copying the id from the URL).

As for the Keys part, You have to first visit this Link and apply for a developer account. Once you are granted access, Create a new project and app by visiting the Twitter Developer Portal.

Twitter Developer Portal

After this, visit the 'Keys and tokens' section and generate + copy your keys.

Twitter Keys

So, now paste your API Key And Secret in consumer_key and consumer_secret and Access Token & Secret in access_token_key and access_token_secret Respectively.

Save the changes and exit the server.js file by pressing ctrl + x and y. After this, Open the package.json file in nano editor by running the below command.

sudo nano package.json
Enter fullscreen mode Exit fullscreen mode

Delete the test script and add the start script like this.

"scripts": {
-    "test": "echo \"Error: no test specified\" && exit 1"
+    "start": "node server.js"
  },
Enter fullscreen mode Exit fullscreen mode

Also, Add the node dependencies that we have in our server.js file.

"author": "",
"license": "ISC",
+ "dependencies": {
+     "node-cron": "^2.0.3",
+     "twitter-lite": "^0.14.0"
+ }
Enter fullscreen mode Exit fullscreen mode

Save the changes and exit the package.json file by pressing ctrl + x and y. Next, we also need to install the node dependencies. To do that run the below command.

npm install
Enter fullscreen mode Exit fullscreen mode

Now, our script is ready and we can start the script by running the below command. After successfull startup you will see the log started in the console.

npm start
Enter fullscreen mode Exit fullscreen mode

You can exit by pressing ctrl + c. It is recommended to use a service known as pm2 to run our application as a process. To install pm2 Run the below command.

sudo npm install pm2 -g
Enter fullscreen mode Exit fullscreen mode

Now, We can start the server by running the command.

pm2 start server.js
Enter fullscreen mode Exit fullscreen mode

After this, You can see our server is online and the terminal is also freed. You can now exit the server by typing exit command.

Anytime, you want to see your pm2 processess use pm2 ls command or if you want to stop a process use pm2 stop {id}.

pm2 Commands

Congrats, You have successfully deployed your first nodejs application to the cloud. If you have any problem, Comment it down and i will try to resolve it ASAP.

Cheers 🍻!!

Original Post Link => https://webbrainsmedia.com/blogs/twitter-bot-using-nodejs-hosted-on-digitalocean

Top comments (0)

Read next

invezza profile image

New release of Node.js v22.9.0💚

Invezza -

anticoder03 profile image

🛠️ Node.js Best Practices for Writing Clean and Scalable Code 🚀

Ashish prajapati -

imani_brown_1a7d9bc29dd27 profile image

How to Easily Manage Authentication in Express.js with FluidAuth

imani brown -

harshalranjhani profile image

Setting Up a Node.js, TypeScript, and Express Project

Harshal Ranjhani -