A critical first step to creating an Amazon Web Services (AWS) AWS Elastic Compute Cloud (EC2) configuration is to configure a Virtual Private Cloud (VPC) Often, the default configuration is sufficient for most administrators' needs but some solutions require an IP address space different than the Amazon default. This article presents the Ansible boilerplate for configuring an alternative IP address space specified by a minimum of parameters: region, VPC CIDR block (e.g., 10.1.0.0/16) and subnet mask size (e.g., 20). The boilerplate calculates subnet CIDR blocks (e.g., 10.1.0.0/20, 10.1.16.0/20, etc...) for each availability zone within the region.
The solution leverages Ansible's ipaddr filter interface to the netaddr Python package with its extended loop variables. The solution also makes extensive use of the Ansible JSON query filter to parse the results of the AWS modules.
Theory of Operation
The implementation:
- Requires the specification of:
- AWS profile (for autheniticaion and use as a project-level name)
- AWS region (where the VPC will be deployed)
- VPC CIDR block
- subnet mask size (in bits)
Creates the VPC in the specified region (with the same name as the profile for idempotent operation)
For each availability zone within the region, creates a unique subnet within the VPC's CIDR block of the specified size
Creates an Internet Gateway and connects to each of the subnets
The implementation also demonstrates how host IP address may be calculated relative to an availability zone's subnet.
Implementation
The Ansible controller must have the netaddr Python package installed.
$ pip install --upgrade netaddr
In these examples the administrator has configured the AWS CLI environment variables AWS_PROFILE and AWS_DEFAULT_REGION to provide the necessary parameters. The CIDR block and subnet mask size are also specified for the project as Ansible facts.
- name: Role Parameters
set_fact:
profile: "{{ lookup('env', 'AWS_PROFILE') }}"
cidr_block: 10.1.0.0/16
subnet_mask_size: 20
- name: aws_region_info
aws_region_info:
filters:
region_name: "{{ lookup('env', 'AWS_DEFAULT_REGION') }}"
register: aws_region_info
The aws_region_info module is invoked to verify the AWS_DEFAULT_REGION parameter.
"aws_region_info": {
"changed": false,
"failed": false,
"regions": [
{
"endpoint": "ec2.us-west-1.amazonaws.com",
"opt_in_status": "opt-in-not-required",
"region_name": "us-west-1"
}
]
}
Once verified, the region is set as a fact for clarity and ease of reference in subsequent module invocations.
- name: region
set_fact:
region: "{{ aws_region_info.regions[0].region_name }}"
The VPC may be created with the above parameters. Note that the AWS_PROFILE value is used to name the VPC for idempotent operation.
- name: "{{ profile }} VPC"
ec2_vpc_net:
name: "{{ profile }}"
region: "{{ region }}"
cidr_block: "{{ cidr_block }}"
register: ec2_vpc_net
"ec2_vpc_net": {
"changed": true,
"failed": false,
"vpc": {
"cidr_block": "10.1.0.0/16",
"cidr_block_association_set": [
{
"association_id": "vpc-cidr-assoc-ffffffffffffa4c3",
"cidr_block": "10.1.0.0/16",
"cidr_block_state": {
"state": "associated"
}
}
],
"classic_link_enabled": false,
"dhcp_options_id": "dopt-ffffffffffff49b8",
"id": "vpc-ffffffffffff9ace",
"instance_tenancy": "default",
"is_default": false,
"owner_id": "999999999999",
"state": "available",
"tags": {
"Name": "PROFILE"
}
}
}
The ec2_vpc_net.vpc is set as a fact for ease of reference in subsequent modules.
- name: vpc
set_fact:
vpc: "{{ ec2_vpc_net.vpc }}"
The aws_az_info module is invoked to retrieve the availability zones for the region:
- name: aws_az_info
aws_az_info:
filters:
region_name: "{{ aws_region_info.regions[0].region_name }}"
register: aws_az_info
"aws_az_info": {
"availability_zones": [
{
"group_name": "us-west-1",
"messages": [],
"network_border_group": "us-west-1",
"opt_in_status": "opt-in-not-required",
"region_name": "us-west-1",
"state": "available",
"zone_id": "usw1-az1",
"zone_name": "us-west-1a"
},
{
"group_name": "us-west-1",
"messages": [],
"network_border_group": "us-west-1",
"opt_in_status": "opt-in-not-required",
"region_name": "us-west-1",
"state": "available",
"zone_id": "usw1-az3",
"zone_name": "us-west-1c"
}
],
"changed": false,
"failed": false
}
The necessary parameters to create the subnets have been accumulated. The JSON query availability_zones[].zone_name is applied to the results of aws_az_info resulting in the string array (['us-west-1a', 'us-west-1c']) of availability zone names. This array is iterated over to calculate the subnet CIDR blocks based on vpc.cidr_block, subnet mask size, and the array index (ansible_loop.index0).
- name: "{{ profile }} VPC Subnets"
vars:
json: "{{ aws_az_info }}"
query: "availability_zones[].zone_name"
availability_zones: "{{ json | json_query(query) }}"
ec2_vpc_subnet:
vpc_id: "{{ vpc.id }}"
az: "{{ item }}"
cidr: >-
{{ vpc.cidr_block | ipsubnet(subnet_mask_size, ansible_loop.index0) }}
loop: "{{ availability_zones }}"
loop_control:
extended: yes
- name: ec2_vpc_subnet_info
ec2_vpc_subnet_info:
filters:
vpc-id: "{{ vpc.id }}"
register: ec2_vpc_subnet_info
The descriptions of the subnets are retrieved with ec2_vpc_subnet_info:
"ec2_vpc_subnet_info": {
"changed": false,
"failed": false,
"subnets": [
{
"assign_ipv6_address_on_creation": false,
"availability_zone": "us-west-1c",
"availability_zone_id": "usw1-az3",
"available_ip_address_count": 4091,
"cidr_block": "10.1.16.0/20",
"default_for_az": false,
"id": "subnet-ffffffffffffeb5e",
"ipv6_cidr_block_association_set": [],
"map_public_ip_on_launch": false,
"owner_id": "999999999999",
"state": "available",
"subnet_arn": "arn:aws:ec2:us-west-1:999999999999:subnet/subnet-ffffffffffffeb5e",
"subnet_id": "subnet-ffffffffffffeb5e",
"tags": {},
"vpc_id": "vpc-ffffffffffff9ace"
},
{
"assign_ipv6_address_on_creation": false,
"availability_zone": "us-west-1a",
"availability_zone_id": "usw1-az1",
"available_ip_address_count": 4091,
"cidr_block": "10.1.0.0/20",
"default_for_az": false,
"id": "subnet-ffffffffffff57fd",
"ipv6_cidr_block_association_set": [],
"map_public_ip_on_launch": false,
"owner_id": "999999999999",
"state": "available",
"subnet_arn": "arn:aws:ec2:us-west-1:999999999999:subnet/subnet-ffffffffffff57fd",
"subnet_id": "subnet-ffffffffffff57fd",
"tags": {},
"vpc_id": "vpc-ffffffffffff9ace"
}
]
}
With the above information, an Internet Gateway may be created and added to the route tables for the subnets.
- name: "{{ profile }} VPC IGW"
ec2_vpc_igw:
vpc_id: "{{ vpc.id }}"
register: ec2_vpc_igw
- name: "{{ profile }} VPC IGW Route Table"
vars:
json: "{{ ec2_vpc_subnet_info }}"
query: "subnets[].id"
subnets: "{{ json | json_query(query) }}"
ec2_vpc_route_table:
vpc_id: "{{ vpc.id }}"
tags:
Name: Internet
subnets: "{{ subnets }}"
routes:
- dest: 0.0.0.0/0
gateway_id: "{{ ec2_vpc_igw.gateway_id }}"
The following snippet demonstrates how a subnet may be found for an availability zone and a host IP may be calculated relative to that subnet.
- name: availability_zone
set_fact:
availability_zone: "{{ region }}a"
- name: "subnet ({{ availability_zone }})"
vars:
json: "{{ ec2_vpc_subnet_info }}"
query: "subnets[?availability_zone=='{{ availability_zone }}'] | [0]"
subnet: "{{ json | json_query(query) }}"
set_fact:
subnet: "{{ subnet }}"
- name: ENI
vars:
index: 4
private_ip_address: "{{ subnet.cidr_block | ipmath(index) }}"
ec2_eni:
subnet_id: "{{ subnet.id }}"
private_ip_address: "{{ private_ip_address }}"
register: eni
Summary
The Ansible boilerplate discussed herein can configure an AWS VPC with a minimum of parameters specified by the administrator.
Boilerplate
The complete boilerplate suitable for cut-and-paste is provide below.
- name: Role Parameters
set_fact:
profile: "{{ lookup('env', 'AWS_PROFILE') }}"
cidr_block: 10.1.0.0/16
subnet_mask_size: 20
- name: aws_region_info
aws_region_info:
filters:
region_name: "{{ lookup('env', 'AWS_DEFAULT_REGION') }}"
register: aws_region_info
- name: aws_az_info
aws_az_info:
filters:
region_name: "{{ aws_region_info.regions[0].region_name }}"
register: aws_az_info
- name: region
vars:
region: "{{ aws_region_info.regions[0].region_name }}"
set_fact:
region: "{{ region }}"
- name: "{{ profile }} VPC"
ec2_vpc_net:
name: "{{ profile }}"
region: "{{ region }}"
cidr_block: "{{ cidr_block }}"
register: ec2_vpc_net
- name: vpc
vars:
vpc: "{{ ec2_vpc_net.vpc }}"
set_fact:
vpc: "{{ vpc }}"
- name: "{{ profile }} VPC Subnets"
vars:
json: "{{ aws_az_info }}"
query: "availability_zones[].zone_name"
availability_zones: "{{ json | json_query(query) }}"
ec2_vpc_subnet:
vpc_id: "{{ vpc.id }}"
az: "{{ item }}"
cidr: >-
{{ vpc.cidr_block | ipsubnet(subnet_mask_size, ansible_loop.index0) }}
loop: "{{ availability_zones }}"
loop_control:
extended: yes
- name: ec2_vpc_subnet_info
ec2_vpc_subnet_info:
filters:
vpc-id: "{{ vpc.id }}"
register: ec2_vpc_subnet_info
- name: "{{ profile }} VPC IGW"
ec2_vpc_igw:
vpc_id: "{{ vpc.id }}"
register: ec2_vpc_igw
- name: "{{ profile }} VPC IGW Route Table"
vars:
json: "{{ ec2_vpc_subnet_info }}"
query: "subnets[].id"
subnets: "{{ json | json_query(query) }}"
ec2_vpc_route_table:
vpc_id: "{{ vpc.id }}"
tags:
Name: Internet
subnets: "{{ subnets }}"
routes:
- dest: 0.0.0.0/0
gateway_id: "{{ ec2_vpc_igw.gateway_id }}"
Top comments (0)