DEV Community

Cover image for Publishing Artifacts to Sonatype Nexus using Jenkins Pipelines
Dmitriy A. for appfleet

Posted on • Originally published at appfleet.com

Publishing Artifacts to Sonatype Nexus using Jenkins Pipelines

In this guide, we will use Jenkins as a Continuous Integration server and Nexus as a build repository.

The end goal of this guide is to create a flow, where we can build, store, organize and monitor the compiled artifacts by Maven through our CI server.

Before we begin, make sure that you already have Jenkins up and running. In case you haven’t set up Jenkins yet, then copy the below command and run it on your Docker enabled host/machine.

$ docker run -d --name jenkins-ci -p 8080:8080 jenkins/jenkins:lts
Enter fullscreen mode Exit fullscreen mode

Once, Jenkins container is configured on your local/remote machine. Go to your preferred browser and open the URL http:///your-ip-addr:8080.

On the very first page, Jenkins will ask you for the admin password, which you can find by running below mentioned command in your terminal:

$  docker exec -i jenkins-ci cat /var/jenkins_home/secrets/initialAdminPassword

b5102c8d9fa245dbb0b8da03f504d3a5
Enter fullscreen mode Exit fullscreen mode

Follow the guided steps to finish the configuration. Save the username and password securely for future use.

Installing Nexus:

Nexus is a repository manager that allows you to store and retrieve artifacts. It enables you to host your built artifacts in a private and secure repo. You can always pull the Nexus Docker image using the following command:

$ docker pull sonatype/nexus3

Using default tag: latest
latest: Pulling from sonatype/nexus3
cb3c77f9bdd8: Pull complete 
fd8daf2668d1: Pull complete 
fd1ff82b00e8: Pull complete 
2a05f7b573af: Pull complete 
Digest: sha256:6570855dfbc3eb094fe5cbbacec87aa8b91d16394dab627177e1deeebb5ac8ee
Status: Downloaded newer image for sonatype/nexus3:latest
docker.io/sonatype/nexus3:latest
Enter fullscreen mode Exit fullscreen mode

Now it’s time to run downloaded sonatype/nexus on the default port 8081. Follow the below-mentioned commands:

$ docker run -d --name nexus_repo -p 8081:8081 sonatype/nexus3
Enter fullscreen mode Exit fullscreen mode

Usually it takes 1 to 2 minutes for the Nexus service to launch in your newly created Docker container. If you wish to follow the log to see if Nexus is up and ready, then run the following command:

$ docker logs nexus_repo -f 
Enter fullscreen mode Exit fullscreen mode

In logs you will see a message stating Started Sonatype Nexus OSS 3.20.1-01. It means your Nexus Repository Manager is ready to use. Now go to your browser and open http://your-ip-addr:8081. Find the Sign In option as shown below:

Alt Text

The default username is admin, whereas to retrieve the password you need to run the following command:

$ docker exec -i nexus_repo cat /nexus-data/admin.password
502ace93-5450-4f0d-97d2-9b3b3a88d149
Enter fullscreen mode Exit fullscreen mode

And that’s it. Your Nexus Repository Manager is ready-to-use. The next step is to create a new repository.

Create a Repository in Nexus:

In this step, you are going to create a Maven Hosted repository in Nexus, where your Jenkins is going to upload “build” artifacts.

Step 1:
Follow the below-mentioned steps to create a hosted repository, name it as maven-nexus-repo, which you are going to use throughout this guide.

Alt Text

Select maven2 (hosted) recipe from the list as shown in the below-mentioned figure:

Alt Text

Step 2:
On the Create Repository page,

  • Enter the name as maven-nexus-repo
  • In Version Policy, select the Mixed type of artifacts.
  • Under the Hosted section, in Deployment policy, select Allow redeploy. It will allow you to deploy an application multiple times.

Alt Text

Step 3:
To create a new user, go to Dashboard > Server Administrator and Configuration > User > Create user. Select Local user type which happens to be the default Realm:

Alt Text

In the Create User page,
1.ID: Enter the desired ID; in our case, it is jenkins-user.
2.First Name: Enter the desired first name; in our case, it is Jenkins.
3.Last Name: Enter the desired second name; in our case, it is User.
4.Email: Enter your email address.
5.Status: Select Active from your drop-down menu.
6.Roles: Make sure that you grant the nx-admin role to your user.

In case you want more details for user creation, then click here.

With this, we are through with the setup part of Nexus Repository Manager. Let us move to Jenkins to setup Nexus there.

Install and Configure Nexus Plugins in Jenkins

Here you are going to install and configure a few plugins for Nexus in Jenkins. For this, go to Jenkins and then Dashboard > Manage Jenkins > Manage Plugins > Available and search and install Nexus Artifact Uploader and Pipeline Utility Steps.

Add Nexus Repository Manager’s user credentials in Jenkins. Go to Dashboard > Credentials > System > Global credentials (unrestricted), as shown below:

Alt Text

Next, set up Maven as a managed tool. Go to Dashboard > Manage Jenkins > Global Tool Configuration and find Maven. Under this section, click on the Maven Installations button and add Maven, as shown below:

Alt Text

Alternatively, you can also install the Maven binary directly to your container on the /var/jenkins_home directory.

Create a Jenkins Pipeline

It’s time to create a Jenkins Job. Here you are going to use Pipeline job type, named as JenkinsNexus, as shown below:

Alt Text

In the next page, find the Pipeline section and copy the below-mentioned script in the text area:

pipeline {
    agent {
        label "master"
    }
    tools {
        maven "Maven"
    }
    environment {
        NEXUS_VERSION = "nexus3"
        NEXUS_PROTOCOL = "http"
        NEXUS_URL = "you-ip-addr-here:8081"
        NEXUS_REPOSITORY = "maven-nexus-repo"
        NEXUS_CREDENTIAL_ID = "nexus-user-credentials"
    }
    stages {
        stage("Clone code from VCS") {
            steps {
                script {
                    git 'https://github.com/javaee/cargotracker.git';
                }
            }
        }
        stage("Maven Build") {
            steps {
                script {
                    sh "mvn package -DskipTests=true"
                }
            }
        }
        stage("Publish to Nexus Repository Manager") {
            steps {
                script {
                    pom = readMavenPom file: "pom.xml";
                    filesByGlob = findFiles(glob: "target/*.${pom.packaging}");
                    echo "${filesByGlob[0].name} ${filesByGlob[0].path} ${filesByGlob[0].directory} ${filesByGlob[0].length} ${filesByGlob[0].lastModified}"
                    artifactPath = filesByGlob[0].path;
                    artifactExists = fileExists artifactPath;
                    if(artifactExists) {
                        echo "*** File: ${artifactPath}, group: ${pom.groupId}, packaging: ${pom.packaging}, version ${pom.version}";
                        nexusArtifactUploader(
                            nexusVersion: NEXUS_VERSION,
                            protocol: NEXUS_PROTOCOL,
                            nexusUrl: NEXUS_URL,
                            groupId: pom.groupId,
                            version: pom.version,
                            repository: NEXUS_REPOSITORY,
                            credentialsId: NEXUS_CREDENTIAL_ID,
                            artifacts: [
                                [artifactId: pom.artifactId,
                                classifier: '',
                                file: artifactPath,
                                type: pom.packaging],
                                [artifactId: pom.artifactId,
                                classifier: '',
                                file: "pom.xml",
                                type: "pom"]
                            ]
                        );
                    } else {
                        error "*** File: ${artifactPath}, could not be found";
                    }
                }
            }
        }
    }
}
Enter fullscreen mode Exit fullscreen mode

Let’s break down the above-mentioned parameters bit by bit:

  • NEXUS_VERSION: Here, we have to mention the exact version of Nexus, which can be nexus2 or nexus3. In our case, it is latest version of nexus3.
  • NEXUS_PROTOCOL: For this guide we have used HTTP protocol, although, in case of production, you will have to use HTTPS.
  • NEXUS_URL: Add your IP address and port number, where you are running Nexus. Make sure that you add Nexus instance details without mentioning protocols, i.e., https or http.
  • NEXUS_CREDENTIAL_ID: Enter the user ID, which you previously created in Jenkins, which in our case is nexus-user-credentials.
  • Project Git: Under stages, we used https://github.com/javaee/cargotracker

As you are through with the Pipeline set up, it’s time to Build our project. Go to the JenkinsNexus project job page and click Build Now. As this is your first build, it is going to take some time, so sit tight.

Once build is a success, in your Jenkins Console Output, you will see something like this:

Alt Text

Whereas, in your Nexus Repository Manager, you would see something similar to this:

Alt Text

Conclusion:

A systematic way to disturb the project’s artifact is critical for any organization. With the help of Jenkins Pipeline and Nexus Repository Manager, you can centralize artifact repo, which ultimately reduces the efforts of reproducing build time as well as switch CI tools without worrying about migrating our artifacts.

Nexus can be configured with cloud storage services like AWS S3 and Google Cloud Storage as well, which gives you additional freedom and delivery application without any hassle of storage.

Top comments (1)

Collapse
 
mevgdev profile image
Mario Ernesto Villanueva Gutierrez

Do you know if posible to create a parent proyect with nexus?, like that:
Parent proyect v1.9.0
Child 1 proyect v2.3.1
Child 2 proyect v5.2.0

Each child proyect is another and diferent repository in a diferent lenguaje