Designing HPC Cluster Networking: What Speeds You Actually Need

Designing HPC Cluster Networking: What Speeds You Actually Need

When building or scaling an HPC cluster, CPUs and GPUs usually get most of the attention.

But in practice, the network design is just as critical. A poorly designed network can bottleneck even the most powerful compute nodes, while a well designed one can significantly improve performance without changing hardware.

This guide breaks down typical networking components in an HPC cluster and what speeds are generally recommended between them.

⸻

Why Networking Matters in HPC

In HPC environments, nodes rarely work in isolation.

They constantly exchange data for:

• MPI communication
• Distributed AI/ML training
• Accessing shared storage

If the network cannot keep up, nodes spend time waiting instead of computing.

⸻

Key Network Paths in an HPC Cluster

Let’s break the cluster into major communication paths:

1. Compute Node ↔ Compute Node (Interconnect)
2. Compute Node ↔ Storage
3. Login Node ↔ Compute Nodes
4. External Access (Users ↔ Login Node)

Each of these has different requirements.

⸻

1. Compute Node ↔ Compute Node (Interconnect)

This is the most critical network in HPC.

It handles:

• MPI traffic
• Synchronization between processes
• Distributed workloads

Recommended Speeds

• Minimum: 25 Gbps
• Common: 100 Gbps
• High-end: 200–400 Gbps

Technologies

• InfiniBand (very low latency)
• Omni-Path
• High-speed Ethernet (RoCE, RDMA-enabled)

Key Focus

• Low latency is more important than raw bandwidth
• RDMA support is highly recommended

Impact

Poor interconnect leads to:

• Poor scaling
• High communication overhead
• Underutilized CPUs/GPUs

⸻

2. Compute Node ↔ Storage

Handles:

• Reading input datasets
• Writing results
• Checkpoints

Recommended Speeds

• Minimum: 10–25 Gbps
• Typical: 40–100 Gbps
• High-performance setups: 100+ Gbps

Storage Types

• NFS (basic setups)
• Lustre / BeeGFS / GPFS (parallel file systems)

Key Considerations

• Throughput matters more than latency
• Parallel file systems scale better than NFS

Impact

If storage is slow:

• Jobs stall during I/O
• GPUs sit idle waiting for data

⸻

3. Login Node ↔ Compute Nodes

Role

• Job submission
• Monitoring
• Light data movement

Recommended Speeds

• 1–10 Gbps is usually sufficient

Notes

• This path is not performance-critical
• Should be isolated from high-speed compute traffic

⸻

4. External Access (User ↔ Login Node)

Role

• SSH access
• File transfers
• Development workflows

Recommended Speeds

• Depends on environment
• Typically 1–10 Gbps uplink

Considerations

• Security is more important than speed here
• Use firewalls, VPNs, and access controls

⸻

Network Design Approaches

1. Single Network (Simple Setup)

• One network for everything
• Lower cost
• Easier to manage

Downside:
Traffic contention between compute, storage, and users

⸻

2. Dual Network (Recommended)

• High-speed network for compute + storage
• Separate Ethernet network for management

Benefits:

• Better performance
• Reduced congestion
• More predictable behavior

⸻

3. Dedicated Storage Network (Advanced)

• Separate network just for storage traffic

Used in:

• Large clusters
• Data-intensive workloads

⸻

Latency vs Bandwidth (Important Distinction)

• Latency: Time to send a message
• Bandwidth: Amount of data transferred

In HPC:

• MPI workloads → sensitive to latency
• Data-heavy workloads → depend on bandwidth

A fast network with high latency can still perform poorly for MPI jobs.

⸻

Common Mistakes in HPC Networking

• Using standard Ethernet without RDMA for MPI workloads
• Mixing storage and compute traffic on the same link
• Underestimating storage bandwidth needs
• Ignoring network topology (oversubscription issues)
• Not validating actual performance with benchmarks

⸻

Practical Example

Cluster Setup:

• 16 compute nodes
• GPU workloads + MPI

Network Design:

• 100 Gbps InfiniBand for inter-node communication
• 100 Gbps link to parallel storage
• 1 Gbps management network

Result:

• Efficient scaling across nodes
• Reduced job runtime
• Stable performance under load

⸻

Final Thoughts

HPC networking is not just about choosing the fastest hardware.

It is about:

• Matching the network to your workload
• Separating traffic intelligently
• Avoiding bottlenecks before they appear

In many cases, upgrading or redesigning the network delivers more performance improvement than upgrading CPUs or GPUs.

If your cluster is not scaling as expected, the network is often the first place to look.