DEV Community

Hands-on Network Security Labs Series' Articles

Back to Khalif AL Mahmud's Series
Lab Task 1 - How I Connected Two Isolated Networks Using Static Routing in GNS3

Lab Task 1 - How I Connected Two Isolated Networks Using Static Routing in GNS3

5
Comments
4 min read
Lab Task 2 - How I Built a Multi-Router Static Routing Network from Scratch Using GNS-3

Lab Task 2 - How I Built a Multi-Router Static Routing Network from Scratch Using GNS-3

5
Comments
7 min read
Lab Task 3 - Static Routing with Backup Links: How Routers Automatically Recover from Failures

Lab Task 3 - Static Routing with Backup Links: How Routers Automatically Recover from Failures

5
Comments
9 min read
Lab Task 4 - How I Built a Multi-Router Network Using RIP and OSPF Dynamic Routing in GNS3

Lab Task 4 - How I Built a Multi-Router Network Using RIP and OSPF Dynamic Routing in GNS3

5
Comments
8 min read
Lab Task 5 - Subnetting in GNS3: Building a Multi-Subnet Network with OSPF Routing from Scratch

Lab Task 5 - Subnetting in GNS3: Building a Multi-Subnet Network with OSPF Routing from Scratch

5
Comments
8 min read
Lab Task 6 - How I Built a Multi-Router DHCP Network in GNS3 with RIP Routing

Lab Task 6 - How I Built a Multi-Router DHCP Network in GNS3 with RIP Routing

5
Comments
7 min read
Lab Task 7 - How I Used Wireshark to Capture ICMP and DHCP Traffic in a GNS3 Network

Lab Task 7 - How I Used Wireshark to Capture ICMP and DHCP Traffic in a GNS3 Network

5
Comments
7 min read
Lab Task 8 - How I Built a Multi-VLAN Network with Inter-VLAN Routing in GNS3 Using a Layer 3 Switch

Lab Task 8 - How I Built a Multi-VLAN Network with Inter-VLAN Routing in GNS3 Using a Layer 3 Switch

5
Comments
7 min read
Lab 9 - Building a Cisco ASA Firewall Lab in GNS3: Inside, DMZ, and Outside Zones with Extended ACLs

Lab 9 - Building a Cisco ASA Firewall Lab in GNS3: Inside, DMZ, and Outside Zones with Extended ACLs

5
Comments
9 min read
Lab Task 10 -Packet Capture on Kali Linux: Daemonlogger Setup, Traffic Generation & Wireshark Analysis

Lab Task 10 -Packet Capture on Kali Linux: Daemonlogger Setup, Traffic Generation & Wireshark Analysis

5
Comments
7 min read
Lab Task 11 – Monitoring HTTP Traffic with Httpry on Kali Linux — Passive Capture, Live Monitoring & CLF Conversion

Lab Task 11 – Monitoring HTTP Traffic with Httpry on Kali Linux — Passive Capture, Live Monitoring & CLF Conversion

5
Comments
7 min read
Lab 12 - Telnet and SSH ( I Captured My Own Password in Wireshark — Here's What Telnet Taught Me About Network Security )

Lab 12 - Telnet and SSH ( I Captured My Own Password in Wireshark — Here's What Telnet Taught Me About Network Security )

5
Comments
10 min read
Lab Task 13 - How I Built a Network Intrusion Detection System with Snort 3 on Ubuntu — and Caught Every Scan

Lab Task 13 - How I Built a Network Intrusion Detection System with Snort 3 on Ubuntu — and Caught Every Scan

5
Comments
8 min read
Lab Task 14 - How I Built a Real-Time Admin Login Attack Detector Using Snort3 and Apache on Ubuntu

Lab Task 14 - How I Built a Real-Time Admin Login Attack Detector Using Snort3 and Apache on Ubuntu

6
Comments 7
6 min read