A Ring Video Doorbell depends on a stable WiFi connection to deliver motion alerts, live video, and two-way communication.
If you've recently upgraded your router, changed your WiFi password, or switched internet providers, you'll need to reconnect your Ring Doorbell to the new network.
Fortunately, Ring makes this process simple through its mobile application.
Why Change Your Ring Doorbell WiFi?
Common reasons include:
New router installation
Updated WiFi password
New internet provider
Moving to a different home
Better wireless coverage
Changing the WiFi connection does not remove your recorded videos or device settings.
Step-by-Step Guide
- Open the Ring App
Sign in using the account associated with your Ring Doorbell.
- Select Your Device
Navigate to:
Menu
Devices
Choose your Ring Doorbell
- Open Device Health
Inside the device settings, select Device Health.
You'll see information including:
Battery status
Signal strength (RSSI)
Network connection
Firmware status
- Select "Change WiFi Network"
Tap Change WiFi Network.
The Ring app will guide you through the setup process.
- Enter Setup Mode
Press the physical setup button on your Ring Doorbell.
Depending on the model:
Orange button on the back
Side setup button on Pro models
When the LED flashes, the device is ready for setup.
- Connect to the New Network
Choose your WiFi network.
Enter the password.
Wait for the device to reconnect.
Troubleshooting Tips
If your Ring Doorbell won't connect:
Verify the WiFi password.
Confirm your model supports the selected WiFi frequency.
Move the router closer to the doorbell.
Restart your router.
Check the RSSI value in Device Health.
Older Ring models support only 2.4 GHz WiFi, while many newer models support both 2.4 GHz and 5 GHz.
Best Practices
For reliable operation:
Keep firmware updated.
Maintain a strong WiFi signal.
Secure your wireless network.
Monitor signal strength regularly.
Avoid unnecessary factory resets.
Key Takeaways
Use Device Health → Change WiFi Network.
Put the Ring Doorbell into setup mode.
Connect to the new wireless network.
Verify signal strength after setup.
No factory reset is required for a simple WiFi change.
Final Thoughts
Changing the WiFi on your Ring Video Doorbell is a simple maintenance task that keeps your smart home security system connected and functioning properly.
By following the in-app setup process and verifying your network signal afterward, you can ensure reliable alerts, smooth video streaming, and uninterrupted home monitoring.
Have you recently upgraded your home WiFi? How was your experience reconnecting your Ring Doorbell? Share your tips in the comments!
Top comments (0)