DEV Community

Nicolas Mesa
Nicolas Mesa

Posted on • Originally published at blog.nicolasmesa.co on

Container Creation Using Namespaces and Bash

Cross-posted from my personal blog https://blog.nicolasmesa.co.

A few weeks ago, I saw a great video explaining how Docker works under the hood (see video below). The video ends with a demo where Jérôme Petazzoni creates a container using nothing but bash. I found many of the commands that he used pretty cryptic, so I decided to explain what he did and the purpose of each command.

Video

(The demo starts around minute 41)

Terminology

Before we dive into the demo, let’s get some terminology out of the way.

Container

A container is a combination of a few technologies including namespaces, cgroups, and capabilities. In this post, we’re going to focus on namespaces.

Namespaces

From Namespaces in operation:

The purpose of each namespace is to wrap a particular global system resource in an abstraction that makes it appear to the processes within the namespace that they have their own isolated instance of the global resource.

There are six types of namespaces in Linux:

  1. Pid: Isolates process identifiers. For example, two processes in different namespaces can have the same PID.
  2. User: Isolates user ids and group ids. Two users in two different user namespaces can have the same user ids. This is pretty useful because it allows mapping an unprivileged user id outside of the namespace to be root inside of the namespace.
  3. Net: This namespace provides network isolation. Processes running in a separate net namespace don’t see the network interfaces of other namespaces.
  4. Mnt: The mount namespace allows containers to have their own mount points without polluting the global namespace. It also provides a way to hide the global mount points from the container.
  5. Uts: This allows a container to have its own hostname for the processes running in the container.
  6. Ipc: Gives containers their own inter-process communication namespace.

Note : There is a lot more to namespaces than this. If you want to learn more, take a look at Namespaces in operation.

Btrfs

From the Btrfs wiki

Btrfs is a modern copy on write (CoW) filesystem for Linux aimed at implementing advanced features while also focusing on fault tolerance, repair, and easy administration.

Setup

System

For this demo, I used a computer running Ubuntu 16.04. To be more specific:

nmesa@desktop-nicolas:~/demos/containers$ uname -a
Linux desktop-nicolas 4.13.0-39-generic #44~16.04.1-Ubuntu SMP Thu Apr 5 16:43:10 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

We also need docker for two things:

  1. To extract the alpine docker image.
  2. To use the bridge provided by docker for networking.

This is the version of docker that I had installed:

root@desktop-nicolas:/btrfs# docker version
Client:
 Version: 18.06.0-ce
 API version: 1.38
 Go version: go1.10.3
 Git commit: 0ffa825
 Built: Wed Jul 18 19:11:02 2018
 OS/Arch: linux/amd64
 Experimental: false

Server:
 Engine:
  Version: 18.06.0-ce
  API version: 1.38 (minimum version 1.12)
  Go version: go1.10.3
  Git commit: 0ffa825
  Built: Wed Jul 18 19:09:05 2018
  OS/Arch: linux/amd64
  Experimental: false

System setup

Before we start to follow along with the video, we to need setup our environment into the same state as Jérôme’s computer. We need to have a btrfs filesystem mounted in /btrfs.

Create the disk image

We start by creating an empty disk image (from the btrfs wiki, the image should be at least 1GB in size).

nmesa@desktop-nicolas:~/demos/containers$ dd if=/dev/zero of=disk.img bs=512 count=4194304
4194304+0 records in
4194304+0 records out
2147483648 bytes (2.1 GB, 2.0 GiB) copied, 4.60753 s, 466 MB/s

nmesa@desktop-nicolas:~/demos/containers$ ls -alh disk.img
-rw-rw-r-- 1 nmesa nmesa 2.0G Aug 23 22:06 disk.img

We use the dd command to create a 2GB empty image. The dd command receives four arguments:

  • if: The file/device to use as the input. In this case, /dev/zero, which outputs a bunch of zeroes.
  • of: The output file/device. In this case, disk.img.
  • bs: This is the block size in bytes (512 bytes in this case).
  • count: The number of bs blocks to read from /dev/zero and write to disk.img. In this case, 4194304 (2 * 1024 * 1024 * 1024 / 512) to make the image 2GB.

Format disk image

Let’s format our new image with the btrfs filesystem by using the mkfs.btrfs command.

nmesa@desktop-nicolas:~/demos/containers$ mkfs.btrfs disk.img
btrfs-progs v4.4
See http://btrfs.wiki.kernel.org for more information.

Label: (null)
UUID: 772f0676-ec96-448d-b58c-31d4c10b5c3a
Node size: 16384
Sector size: 4096
Filesystem size: 2.00GiB
Block group profiles:
  Data: single 8.00MiB
  Metadata: DUP 110.38MiB
  System: DUP 12.00MiB
SSD detected: no
Incompat features: extref, skinny-metadata
Number of devices: 1
Devices:
   ID SIZE PATH
    1 2.00GiB disk.img

Mount the disk image

Great! We have formatted the filesystem! We need to mount the image to /btrfs using the mount command (note that you have to be root ).

root@desktop-nicolas:/home/nmesa/demos/containers# mkdir /btrfs
root@desktop-nicolas:/home/nmesa/demos/containers# mount -t btrfs disk.img /btrfs

We are ready to follow along with the video!

Video breakdown

In this section, we follow along with the video, and I describe what each command does. Most commands require that you run them as root.

Make mount private

root@desktop-nicolas:/# mount --make-rprivate /

With this command, we make the mounts that our container is going to make private. This prevents any mounts that our container does, from being visible by the host system. The r in --make-rprivate stands for recursive which means it makes all mount points private.

Create container image

Let’s create two directories, one to hold the source images and one to hold the container images.

root@desktop-nicolas:/btrfs# mkdir images containers

Then we use the btrfs subvol create command to create a new image called alpine.

root@desktop-nicolas:/btrfs# btrfs subvol create images/alpine
Create subvolume 'images/alpine'
root@desktop-nicolas:/btrfs# ls images/alpine/
root@desktop-nicolas:/btrfs#

The btrfs command is used to control btrfs filesystems. The subvolume subcommand is used to manage btrfs subvolumes. We use the create subcommand to create a subvolume named alpine in the images directory.

We have an image, but it’s empty. We use docker to get the alpine image.

root@desktop-nicolas:/btrfs# CID=$(docker run -d alpine true)
root@desktop-nicolas:/btrfs# echo $CID
9b290758c1734811c85445640c985fed9803121891d6604b4260e985c2647404
root@desktop-nicolas:/btrfs# docker export $CID | tar -C images/alpine/ -xf-
root@desktop-nicolas:/btrfs# ls images/alpine/
bin dev etc home lib media mnt proc root run sbin srv sys tmp usr var

We run docker run -d alpine true and assign its output (the container id) to the CID variable. Here’s a better explanation of the docker command:

  • run: runs a container.
  • -d: Detaches the container and prints the container id. Our terminal doesn’t wait for the container to finish its execution.
  • alpine: The image that the container should use.
  • true: The command to run in the container.

We use the docker export command to export the image. We pipe that image to the tar command which decompresses it and puts the files in images/alpine. Then we run ls images/alpine to see the contents of the image.

The next step is to take a snapshot of this image and put it in our containers folder. The snapshot’s name is tupperware.

root@desktop-nicolas:/btrfs# btrfs subvol snapshot images/alpine/ containers/tupperware
Create a snapshot of 'images/alpine/' in 'containers/tupperware'
root@desktop-nicolas:/btrfs# ls containers/tupperware/
bin dev etc home lib media mnt proc root run sbin srv sys tmp usr var

We used the snapshot subcommand to create a snapshot of the subvolume alpine with the name tupperware in the containers directory. Snapshots are very efficient. They don’t copy the data from the source subvolume making them space efficient and very fast to create. If a snapshot is modified, the original subvolume won’t be affected. We can see this in the following example:

root@desktop-nicolas:/btrfs# touch containers/tupperware/NICK_WAS_HERE
root@desktop-nicolas:/btrfs# ls containers/tupperware/
bin dev etc home lib media mnt NICK_WAS_HERE proc root run sbin srv sys tmp usr var
root@desktop-nicolas:/btrfs# ls images/alpine/
bin dev etc home lib media mnt proc root run sbin srv sys tmp usr var

In this example, we add a file called NICK_WAS_HERE to the snapshot. Then we prove that it is visible in the snapshot but not in the original alpine subvolume. More information about the btrfs command can be found in this post.

Testing using chroot

Let’s use the chroot command to run sh inside the tupperware snapshot.

root@desktop-nicolas:/btrfs# chroot containers/tupperware/ sh
/ # ls /
NICK_WAS_HERE dev home media proc run srv tmp var
bin etc lib mnt root sbin sys usr
/ # apk
apk-tools 2.10.0, compiled for x86_64.

Installing and removing packages:
  add Add PACKAGEs to 'world' and install (or upgrade) them, while ensuring that all dependencies are met
  del Remove PACKAGEs from 'world' and uninstall them

System maintenance:
  fix Repair package or upgrade it without modifying main dependencies
  update Update repository indexes from all remote repositories
  upgrade Upgrade currently installed packages to match repositories
  cache Download missing PACKAGEs to cache and/or delete unneeded files from cache

Querying information about packages:
  info Give detailed information about PACKAGEs or repositories
  list List packages by PATTERN and other criteria
  dot Generate graphviz graphs
  policy Show repository policy for packages

Repository maintenance:
  index Create repository index file from FILEs
  fetch Download PACKAGEs from global repositories to a local directory
  verify Verify package integrity and signature
  manifest Show checksums of package contents

Use apk <command> --help for command-specific help.
Use apk --help --verbose for a full command listing.

This apk has coffee making abilities.
/ # exit
root@desktop-nicolas:/btrfs#

chroot is used to change the root directory of a program. In the example above, the /btrfs/container/tupperware directory becomes the root of the filesystem. We execute apk, which is only available in alpine, and then we exit the container.

Note that we didn’t use namespaces in this “container.” Let’s change that!

Using namespaces

root@desktop-nicolas:/btrfs# unshare --mount --uts --ipc --net --pid --fork bash
root@desktop-nicolas:/btrfs#

We use the unshare command to run a program (bash) in different mount, uts, ipc, net and pid namespaces. We also pass in the --fork flag to create a new process as a child of the unshare command. It may seem like nothing happened from the command output, but we’re using namespaces and are somewhat isolated from the global namespace. Let’s change the hostname to prove that we are in an isolated uts namespace.

root@desktop-nicolas:/btrfs# hostname tupperware
root@desktop-nicolas:/btrfs# exec bash
root@tupperware:/btrfs#

Note that after executing bash, our hostname switched to tupperware. Running hostname from another terminal shows that the global namespace still has the same hostname (desktop-nicolas in this case).

# from a different terminal
nmesa@desktop-nicolas:~/demos/containers$ hostname
desktop-nicolas

Let’s do some experiments with the pid namespace.

root@tupperware:/btrfs# ps
  PID TTY TIME CMD
24506 pts/26 00:00:00 bash
24551 pts/26 00:00:00 unshare
24552 pts/26 00:00:00 bash
24961 pts/26 00:00:00 ps
28780 pts/26 00:00:00 sudo
28781 pts/26 00:00:00 su
28782 pts/26 00:00:00 bash
root@tupperware:/btrfs# pidof unshare
24551
root@tupperware:/btrfs# kill $(pidof unshare)
bash: kill: (24551) - No such process

We see a lot more processes than expected. The PIDs are also those of the main system. What is going on? It turns out that the /proc of the global namespace is mounted, and the ps command uses /proc to get some of its information. (You can verify this by running strace ps.)

Mount proc

Let’s mount /proc.

root@tupperware:/btrfs# mount -t proc proc /proc
root@tupperware:/btrfs# ps
  PID TTY TIME CMD
    1 pts/26 00:00:00 bash
   30 pts/26 00:00:00 ps
root@tupperware:/btrfs# umount /proc
root@tupperware:/btrfs#

After we mount proc, ps only shows the processes running in our container with the correct PIDs. We unmount /proc again for now.

We’ve used mount before. Let’s go over what it does.

The mount command is used to mount filesystems and usually has the following syntax:

mount -t <type> <device> <directory>

From the mount man page:

this tells the kernel to attach the filesystem found on <device> (which is of type <type>) at the directory <directory>.

Here’s the argument breakdown for our specific case:

  • -t proc: The type of filesystem to use is proc.
  • proc: The /proc filesystem is not attached to a device. Any keyword here would work.
    • Note that in the video Jérôme uses none instead of proc for this value. I changed this to be proc because the mount man page discourages the use of none for this (“The customary choice none is less fortunate: the error message ‘none busy’ from umount can be confusing.“).
  • /proc: The directory where we want to mount the proc filesystem.

Pivot root

Let’s make /btrfs/containers/tupperware the root of our filesystem by using mount and pivot_root.

root@tupperware:/btrfs# mkdir /btrfs/containers/tupperware/oldroot
root@tupperware:/btrfs# mount --bind /btrfs/containers/tupperware /btrfs
root@tupperware:/btrfs# cd /btrfs/
root@tupperware:/btrfs# ls
bin dev etc home lib media mnt NICK_WAS_HERE oldroot proc root run sbin srv sys tmp usr var
root@tupperware:/btrfs# pivot_root . oldroot
root@tupperware:/btrfs# cd /
root@tupperware:/# ls
NICK_WAS_HERE dev home media oldroot root sbin sys usr
bin etc lib mnt proc run srv tmp var
root@tupperware:/# ls oldroot/
bin cdrom hello lib media root srv usr
boot core home lib32 mnt run sys var
bt dev initrd.img lib64 opt sbin tes vmlinuz
btrfs etc initrd.img.old lost+found proc snap tmp vmlinuz.old

Let’s break this down:

  1. We create a directory called oldroot where our current root filesystem will be mounted. As Jérôme explained in the video, to be able to run pivot_root successfully, you need to be close to the top of the filesystem (/).
  2. We use mount --bind to get the container filesystem to /btrfs. (Jérôme splits this into two steps, and I didn’t understand why. I decided to try it this way to see if it would work and it did). The mount --bind command is useful to mount a directory somewhere else (in our case we’re mounting /btrfs/containers/tupperware to /btrfs).
  3. We go to /btrfs and run ls to make sure that our container filesystem is mounted there.
  4. We execute pivot_root which switches the current directory (/btrfs) to be the new root and mounts the current root in oldroot.
  5. We move to the new root and check that it is mounted correctly by running ls.
  6. We verify that oldroot has the old root mount point.

Note : I didn’t understand why we needed to do a pivot_root instead of doing a bind mount point to /. This email by Linus Torvalds himself helped me understand. In a nutshell, / points to the process’ root of the filesystem. By doing a bind mount to root (/), the process would still point to the old version of /.

Fixing the mount points

Let’s take a look at our mount points.

root@tupperware:/# mount -t proc proc /proc
root@tupperware:/# mount | head
/dev/sda2 on /oldroot type ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda2 on /oldroot type ext4 (rw,relatime,errors=remount-ro,data=ordered)
udev on /oldroot/dev type devtmpfs (rw,nosuid,relatime,size=16404692k,nr_inodes=4101173,mode=755)
devpts on /oldroot/dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /oldroot/dev/shm type tmpfs (rw,nosuid,nodev)
mqueue on /oldroot/dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /oldroot/dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
tmpfs on /oldroot/run type tmpfs (rw,nosuid,noexec,relatime,size=3286976k,mode=755)
tmpfs on /oldroot/run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
cgmfs on /oldroot/run/cgmanager/fs type tmpfs (rw,relatime,size=100k,mode=755)

We mount /proc first since mount relies on it. (You can verify this by running strace mount).

Note : The mount point list was pretty, big so I piped it to head to show the first 10 lines.

Most of these mounts shouldn’t be part of our container so let’s unmount everything and mount /proc again.

root@tupperware:/# umount -a
umount: can't unmount /oldroot/btrfs: Resource busy
umount: can't unmount /oldroot: Resource busy
umount: can't unmount /oldroot: Resource busy
root@tupperware:/# mount -t proc proc /proc
root@tupperware:/# mount
/dev/sda2 on /oldroot type ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda2 on /oldroot type ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/loop0 on /oldroot/btrfs type btrfs (ro,relatime,space_cache,subvolid=5,subvol=/)
/dev/loop0 on / type btrfs (ro,relatime,space_cache,subvolid=258,subvol=/containers/tupperware)
proc on /proc type proc (rw,relatime)

umount failed for /oldroot because the resource was busy. This is why /oldroot still shows up when we run mount. Let’s fix that.

root@tupperware:/# umount -l /oldroot
root@tupperware:/# mount
/dev/loop0 on / type btrfs (ro,relatime,space_cache,subvolid=258,subvol=/containers/tupperware)
/dev/loop0 on / type btrfs (ro,relatime,space_cache,subvolid=258,subvol=/containers/tupperware)
proc on /proc type proc (rw,relatime)

The -l flag in the umount command stands for lazy. According to the umount man page, this flag will “detach the filesystem from the file hierarchy now, and clean up all references to this filesystem as soon as it is not busy anymore.” As a result, we don’t see any references to /oldroot when we rerun mount.

Networking

Let’s verify that we don’t have access to the network.

root@tupperware:/# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
ping: sendto: Network unreachable
root@tupperware:/# ifconfig -a
lo Link encap:Local Loopback
          LOOPBACK MTU:65536 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Good! We don’t have network access, and we only have the loopback interface. Let’s fix that.

Note : We run the following commands from a separate terminal (not in our container).

We need the process id of our container (the PID of unshare).

root@desktop-nicolas:/home/nmesa# CPID=$(pidof unshare)
root@desktop-nicolas:/home/nmesa# echo $CPID
24551

We assign the PID to the CPID variable to make it easier to copy/paste commands if you are following along. Let’s create a pair of virtual network interfaces.

root@desktop-nicolas:/home/nmesa# ip link add name h$CPID type veth peer name c$CPID

The ip link add command creates two interfaces of type veth (virtual ethernet interface). One with name h24551 and the other one with name c24551. h stands for host, c stands for container and 24551 is the PID of our container.

Let’s move the c24551 interface to our container (note this command is also executed from the host).

root@desktop-nicolas:/home/nmesa# ip link set c$CPID netns $CPID

The ip link set command sets configuration attributes to interfaces. In this case, it sets the netns (network namespace) to be the same as the process id stored in $CPID (24551 in our case).

Let’s get back to our container terminal to verify that it got the new interface.

root@tupperware:/# ifconfig -a
c24551 Link encap:Ethernet HWaddr 96:18:F1:61:12:A2
          BROADCAST MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

lo Link encap:Local Loopback
          LOOPBACK MTU:65536 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Great! We have the interface inside our container! Let’s get back to our host terminal and attach the h24551 interface to the docker bridge (docker0).

root@desktop-nicolas:/home/nmesa# ip link set h$CPID master docker0 up
root@desktop-nicolas:/home/nmesa# ifconfig docker0
docker0 Link encap:Ethernet HWaddr 02:42:ac:03:c8:91
          inet addr:172.17.0.1 Bcast:172.17.255.255 Mask:255.255.0.0
          inet6 addr: fe80::42:acff:fe03:c891/64 Scope:Link
          UP BROADCAST MULTICAST MTU:1500 Metric:1
          RX packets:77485 errors:0 dropped:0 overruns:0 frame:0
          TX packets:77624 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:6199951 (6.1 MB) TX bytes:164681776 (164.6 MB)

We use the ip link set command to attach the interface to the docker0 bridge. We also grab the ip address of our docker0 interface: 172.17.0.1 (write it down as you’ll need this later).

Note : Jérôme didn’t do this last step, and I suspect this is why the demo didn’t work as expected for him.

Let’s go back to our container terminal and configure the network interface.

root@tupperware:/# ip link set lo up
root@tupperware:/# ip link set c24551 name eth0 up
root@tupperware:/# ip addr add 172.17.42.3/16 dev eth0
root@tupperware:/# ip route add default via 172.17.0.1
root@tupperware:/# ifconfig
eth0 Link encap:Ethernet HWaddr 96:18:F1:61:12:A2
          inet addr:172.17.42.3 Bcast:0.0.0.0 Mask:255.255.0.0
          inet6 addr: fe80::9418:f1ff:fe61:12a2/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:35 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:3789 (3.7 KiB) TX bytes:936 (936.0 B)

lo Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:65536 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Let’s break this down:

  1. We bring up the loopback interface.
  2. We bring up the c24551 interface and rename it to eth0. Note that this command can’t be copied and pasted since your interface probably has a different name.
  3. We assign the ip address of 172.17.42.3 to our eth0 interface. Note that this ip address has to be within the range that we got back from the docker0 interface (172.17.0.0/16 in our case).
  4. We set the default gateway of our container to be 172.17.0.1 (this should be the ip address that we got from docker0).
  5. We run a quick ifconfig to make sure everything is setup correctly.

Now, the moment of truth. Let’s ping 8.8.8.8.

root@tupperware:/# ping -c 3 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: seq=0 ttl=121 time=11.045 ms
64 bytes from 8.8.8.8: seq=1 ttl=121 time=10.981 ms
64 bytes from 8.8.8.8: seq=2 ttl=121 time=10.508 ms

--- 8.8.8.8 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 10.508/10.844/11.045 ms

Our container has network connectivity!

Let’s finish the job

As Jérôme noted in the video, we are still running bash inside the container, but the alpine image doesn’t have bash. Up until this point, we’ve been doing the container runtime’s job. To finish the container handoff, we run the following command:

root@tupperware:/# exec chroot / sh
/ #

The exec command is a built-in utility in bash (who knew?). It replaces the shell with the command (chroot in our case) without starting a new process. Once this command is executed, we’re officially in a container. Let’s run a few commands.

/ # apk
apk-tools 2.10.0, compiled for x86_64.

Installing and removing packages:
  add Add PACKAGEs to 'world' and install (or upgrade) them, while ensuring that all dependencies are met
  del Remove PACKAGEs from 'world' and uninstall them

System maintenance:
  fix Repair package or upgrade it without modifying main dependencies
  update Update repository indexes from all remote repositories
  upgrade Upgrade currently installed packages to match repositories
  cache Download missing PACKAGEs to cache and/or delete unneeded files from cache

Querying information about packages:
  info Give detailed information about PACKAGEs or repositories
  list List packages by PATTERN and other criteria
  dot Generate graphviz graphs
  policy Show repository policy for packages

Repository maintenance:
  index Create repository index file from FILEs
  fetch Download PACKAGEs from global repositories to a local directory
  verify Verify package integrity and signature
  manifest Show checksums of package contents

Use apk <command> --help for command-specific help.
Use apk --help --verbose for a full command listing.

This apk has coffee making abilities.
/ # ls
NICK_WAS_HERE dev home media oldroot root sbin sys usr
bin etc lib mnt proc run srv tmp var

Cleanup

Here are some cleanup steps commands.

/ # exit
root@desktop-nicolas:/btrfs# exit
root@desktop-nicolas:/btrfs# cd /
root@desktop-nicolas:/# umount /btrfs
root@desktop-nicolas:/# exit
exit
nmesa@desktop-nicolas:~/demos/containers$ rm -f disk.img
nmesa@desktop-nicolas:~/demos/containers$

Note : I didn’t have to delete my veth interfaces. I’m not sure if they are automatically removed once the network namespace dies.

Conclusion

A lot goes on under the hood to provision containers! This was only covering the namespaces part. There’s also cgroups, capabilities, devices, etc. As Jérôme suggests, don’t create your own container runtime and use docker instead.

Links / Further reading

Top comments (5)

Collapse
 
guntbert profile image
Guntbert Reiter

Thx for this - the concept of namespaces was very new for me and I learned a lot.

Just one suggestion: instead of
"There are six namespaces in Linux:" you should write
"There are six types of namespaces in Linux:" (taken from the article about namespaces you linked to)

Collapse
 
nicolasmesa profile image
Nicolas Mesa

Hi! I'm glad you liked it and learned something.

I've incorporated your suggestion. Thanks for reading!

Collapse
 
ajaykpat profile image
ajaykpat

Hi Nicolas:

Thanks for sharing this and making it very crisp and clear. Btw i am not able to view the video do need some logins.

Collapse
 
nicolasmesa profile image
Nicolas Mesa

Hey ajaykpat!

I'm glad you liked it! The video was marked as private but it looks like they made it public again!

Collapse
 
ajaykpat profile image
ajaykpat

Thanks Nicolas for update. Now i can able to view it . Learning the basics of container... still long way to go. -:)