DEV Community

Cover image for My commit message said "You've hit your session limit"
Shyamala
Shyamala

Posted on

My commit message said "You've hit your session limit"

#genai #ollama #learning #llm

🧐 Context 🧐

I had this one-liner that I was using.

git commit -m "$(git diff --staged | claude -p "Provide a simple, one-line git commit message based on this diff following best practices. Output absolutely nothing else.")"
Enter fullscreen mode Exit fullscreen mode

Pipe the staged diff to Claude, get a commit message back. Worked well until I hit my Claude usage limit mid commit. The shell captured the error instead of a commit message.

So I had a commit in my repo that said:

You've hit your session limit

That's when it hit me! Voila, ✨My use case for a Local Model.✨

⚠️ Disclaimer ⚠️

  • I am learning GenAI, this is my journey
  • This is not a tutorial
  • What is obvious to you might not be obvious to me

Getting Ollama running

Ollama lets you run open source models locally. After installing it, you have a server running at http://localhost:11434.

ollama pull qwen2.5-coder:1.5b
Enter fullscreen mode Exit fullscreen mode

I picked qwen2.5-coder:1.5b because it's small and code-aware.

Why 1.5b specifically? My laptop has 8GB RAM. That's not a lot when you're running a model locally.

Here's the rough math (these are estimates from my machine, yours may vary):

  • Total Mac RAM: 8.0 GB
  • macOS + apps already running: ~4.0 to 5.0 GB
  • Model loaded in memory: ~1.2 GB (based on the model file size of ~1 GB)
  • Context window: ~0.03 GB
  • Remaining: ~1.77 to 2.77 GB free

Interestingly, despite being a 1.5 billion parameter model, qwen2.5-coder:1.5b only takes up about 1 GB of disk space. That's because it's a quantized model.

Quantization means the model's weights are stored at lower precision, using 4-bit or 8-bit integers instead of the usual 16-bit or 32-bit floating point numbers. This significantly reduces the model size and memory footprint, although it may slightly impact accuracy.

I tried larger models. My laptop became unusable. Fans spinning, apps freezing, the whole thing. So 1.5b it is.

There's another quantized model I found that could work β€” gemma3:1b-it-qat. I plan to test it sometime and see how it compares in terms of performance and resource usage.

First attempt

I swapped Claude with Ollama in my one-liner:

git commit -m "$(git diff --staged | ollama run qwen2.5-coder:1.5b "Provide a simple, one-line git commit message based on this diff following best practices. Output absolutely nothing else.")"
Enter fullscreen mode Exit fullscreen mode

I ran it against a change where I had removed the tools section from some agent config front matter from 6 files. This Worked

The commit message said it was a change to a README file.

πŸ€” What does this mean? πŸ€”

Despite qwen2.5-coder:1.5b's large native context window of 32,768 tokens, Ollama actually restricts the default context size when running without a Modelfile.

I checked Ollama's logs and found this line:

level=INFO source=routes.go:2073 msg="vram-based default context" total_vram="5.3 GiB" default_num_ctx=4096
Enter fullscreen mode Exit fullscreen mode

It shows that based on my machine's VRAM of 5.3 GiB, Ollama set a default num_ctx of 4096 tokens. That's why the model only saw the beginning of the diff and guessed about the README file.

Second attempt

I thought maybe I need a better prompt. So I ran it again with more instructions.

This time it said the change was in code-reviewer.md. That was one of the 6 files, and it completely ignored the other 5.

The important thing here is that the model did not complain. It did not say "I couldn't read the rest". It just gave me a confident answer based on partial input.

At this point I understood tuning the prompt alone is insufficient and I need to tune the model too.

Creating a Modelfile

This is something I just learned. A Modelfile is a config layer on top of a base model. You can change parameters and create a named model from it.

FROM qwen2.5-coder:1.5b

PARAMETER num_ctx 8192 
PARAMETER temperature 0.2
Enter fullscreen mode Exit fullscreen mode

Two things I changed:

num_ctx 8192 β€” While qwen2.5-coder:1.5b can handle up to 32k tokens natively, Ollama defaults to a smaller context window when run without a Modelfile (in my case, 4096 based on VRAM). I bumped it to 8k, and be memory-efficient on my 8GB machine.

temperature 0.2 β€” lower temperature for more predictable output. For commit messages I don't want creative, I want consistent.

ollama create qwen-commit -f ./Modelfile
Enter fullscreen mode Exit fullscreen mode

Now I have a model called qwen-commit that I can use for this specific task.

By the way, a Modelfile is not the only way to set these. You can use the REST API directly, and pass an options object:

curl http://localhost:11434/api/generate -d '{
  "model": "qwen2.5-coder:1.5b",
  "prompt": "${YOUR_PROMPT}",
  "options": {
    "temperature": 0.2,
    "num_ctx": 8192
  }
}'
Enter fullscreen mode Exit fullscreen mode

For my use case the Modelfile made more sense because I just want to call ollama run qwen-commit and have everything pre-configured.

Third attempt

With the bigger context window, the model could now see all 6 files. But it still described the change as "β ™ β Ή β Έ β Ό β ΄ β ¦ β § β ‡ ⠏ β ‹

`diff feat(.opencode/agent): update tool list for code-reviewer, frontend-enginee frontend-engineer, go-backend-engineer, project-lead, req requirements-analyst, solution-architect". Better, Mouthful but wrong.

πŸ€” What does this mean? πŸ€”

The model was reading the full diff now but commit message was technically correct, but nothing like what we would write in a commit message. Look at how it had frontend-enginee frontend-engineer or req requirements-analyst

So I changed the prompt. Instead of making the model figure it out, I just told it.


bash
affected_files=$(git diff --staged --name-only | paste -sd, -)
Enter fullscreen mode Exit fullscreen mode

Then added to the prompt: "Note that the changes are located in these files: [$affected_files]"

After this the commit messages got much better. The model didn't have to guess anymore.

One more thing

The commit messages were now accurate but the model kept wrapping them in weird formatting despite the prompt saying not to. Sometimes backticks. Sometimes it prefixed with "diff". Sometimes random quotes around the message.

So I added a cleanup step to strip all of that out:


bash
msg=$(echo "$msg" | tr -d '\r' | sed -E \
  -e 's/

```(diff)?//g' \
  -e 's/^diff[[:space:]]+//I' \
  -e 's/^[[:space:]]+//;s/[[:space:]]+$//' \
  -e 's/^["'\'']//' -e 's/["'\'']$//')
Enter fullscreen mode Exit fullscreen mode

Not elegant but it catches most of the junk the model adds. Till the time I tune the prompt and model this stays!

I also switched from git diff --staged to git diff --staged --unified=0. By default, git shows 3 lines of context around each change. For a commit message, the model doesn't need that surrounding context. It just needs to know what changed. --unified=0 strips all that out, which means fewer tokens sent to the model. On a small context window, every token counts.

Tada πŸŽ‰

* b6f0abc (HEAD -> main, origin/main, origin/HEAD) fix: update tool list for all agents
Enter fullscreen mode Exit fullscreen mode

Much bigger code related commit, you can see gradual improvements.

* b13f344 (HEAD -> main) fix(inspection-workflow): add requirement for editing confirmed vess vessel profile
* 958053c sh fix(app_test.go, sqlite.go, sqlite_test.go, tasks.md): add save and cancel  behaviour tests for vessel profile editing
* 0f33259 sh fix: update vessel profile form and edit flow in App.svelte, add tests for  editing workflow, and improve styles in styles.css, update model in go/mode go/models.ts
Enter fullscreen mode Exit fullscreen mode

The final Modelfile

After all the iterations, my Modelfile looks quite different from where I started:

FROM qwen2.5-coder:1.5b

PARAMETER num_ctx 8192
PARAMETER temperature 0.2
PARAMETER top_p 0.7
PARAMETER num_predict 256
PARAMETER repeat_penalty 1.2
PARAMETER stop "Changes to be committed:"
PARAMETER stop "Note:"
SYSTEM """
You are an expert developer's assistant. Your sole task is to generate a clean, concise one-line Git commit message based on the provided code diff.
Rules:
- Respond ONLY with the commit message text.
- Do NOT include markdown code blocks, backticks, explanations, intro text, or outro text.
- Use the Conventional Commits format (e.g., feat(scope): message, fix: message).
- Keep the one line under 100 characters.
- Use the imperative mood ("Add feature", not "Added feature" or "Adds feature").
"""
Enter fullscreen mode Exit fullscreen mode

What each parameter does and why I added it:

temperature 0.2: controls randomness. Lower means more predictable. I don't want creative commit messages.

top_p 0.7: works with temperature. It limits the model to only consider the top 70% most likely next words. Another way to keep the output focused and not wander off.

num_predict 256: maximum number of tokens the model can output. A commit message is one line. I don't need the model writing an essay. This caps it.

repeat_penalty 1.2: penalizes the model for repeating itself. Without this I was getting things like frontend-enginee frontend-engineer or req requirements-analyst. The model would stutter and repeat parts of words.

stop "Changes to be committed:" and stop "Note:" β€” stop sequences. Sometimes the model would keep going after the commit message and start generating text that looked like git output. These tell the model to stop immediately if it starts outputting these strings.

The SYSTEM block is the prompt baked into the model. Every time I run ollama run qwen-commit, this prompt is already there. I don't have to pass it every time.

The final function

After all the iterations, here is what I ended up with. A custom shell function gac and an alias gacc. It defaults to the local model, but I can also use Claude when I want to.

gac() {
  # 1. Check for staged changes
  if git diff --cached --quiet; then
    echo "❌ Error: No staged changes found. Run 'git add' first."
    return 1
  fi

  local mode="${1:-qwen}"
  local msg=""
  local exit_code=0

  # Gather file names for context
  local affected_files
  affected_files=$(git diff --staged --name-only | paste -sd, -)

  # ---------------------------------------------------------
  # IMPROVED PROMPT: Strict rules for Conventional Commits
  # ---------------------------------------------------------
  local system_prompt="You are a strict code assistant. Write a single-line Conventional Commit message for the provided diff.
Strict Rules:
1. Format must exactly match: type(scope): description
2. Allowed types ONLY: feat, fix, docs, style, refactor, perf, test, chore.
3. The 'scope' must be a single, broad feature/module name (e.g., vessel-profile, api). NEVER use file names.
4. The 'description' must summarize the high-level intent in the imperative mood (e.g., 'add form validation').
5. ABSOLUTELY DO NOT list specific file names, paths, or extensions in the commit message.
6. Output EXACTLY one line. No markdown blocks, no quotes, no explanations, and no stray prefixes like 'sh'.
Context: The files modified are [$affected_files]."

  # 2. Execution Routing
  if [ "$mode" = "claude" ]; then
    msg=$(git diff --staged --unified=0 | claude -p "$system_prompt" --output-format text 2>&1)
    exit_code=$?
  else
    if ! curl -s --max-time 2 http://localhost:11434 > /dev/null; then
      echo "❌ Error: Local Ollama server is not running on port 11434."
      return 1
    fi
    msg=$(git diff --staged --unified=0 | ollama run qwen-commit "$system_prompt" 2>/dev/null)
    exit_code=$?
  fi

  # 3. Robust Error Validation
  if [ $exit_code -ne 0 ] || [ -z "$msg" ]; then
    echo "❌ Error: Failed to generate a response via $mode."
    echo "Details received: $msg"
    return 1
  fi

  # 4. Strict Text Cleaning Pipeline
  msg=$(echo "$msg" | tr -d '\r' | sed -E -e 's/```(diff)?//g' -e 's/^[[:space:]]+//;s/[[:space:]]+$//' -e 's/^["'\'']//' -e 's/["'\'']$//')

  # 5. Run git commit cleanly
  git commit -m "$msg"
}

# Alias to explicitly force Claude
alias gacc="gac claude"
Enter fullscreen mode Exit fullscreen mode

Lessons Learned

  • Tell the model what you already know. Don't make it guess things you can easily extract.
  • Low temperature for tasks where you want some determinism.
  • Modelfiles are useful. You can create a named model configured for a specific job.
  • Model size, (V)RAM, and context size are all connected. On a constrained machine, you have to be intentional about all three.

Is this perfect?

No. It still sometimes misses the point of a change. It takes time on larger commits. There is room for improvement.

Why not just use Claude directly? That's the easiest thing to do, but it still costs me tokens. And I wanted to learn how local models work. How context windows affect output. How to tune a model for a specific job. That was the whole point for me.

It works offline, costs nothing πŸ’°, and I understand every piece because I broke it and fixed it.

I find the best way to learn is to find a real use case, however trivial. It helps you understand concepts one thing at a time.

Next up: My learnings building a green field product with OpenSpec meant for Brown field projects

I welcome all constructive feedback and comments

Top comments (4)

Collapse
 
ben profile image
Ben Halpern •

What is obvious to you might not be obvious to me

Might as well be the slogan for software development

Collapse
 
buildbasekit profile image
buildbasekit •

At least it committed the truth. πŸ˜…

I've definitely written commit messages that were far less descriptive than "You've hit your session limit."

Collapse
 
jugeni profile image
Mike Czerwinski •

"Tell the model what you already know. Don't make it guess things you can easily extract."

That lesson is doing more work than the rest of the piece. You found the boundary between what the model knows generically (commit conventions, imperative mood, Conventional Commits format) and what only your repo knows in this moment (which files actually changed). The first was free in the weights. The second was a five-line shell pipe.

When the model got both, it stopped hallucinating. When it had to guess the second from the first, it confabulated confidently. The README that wasn't there. The five files it forgot about. The model didn't get smarter. The prompt got more honest about what only the local shell could supply.

There's a piece from Marco Somma on dev.to today making the same cut from the memory-architecture side: stored context earns its keep when it carries information contingent to this situation and absent from the weights. Affected file names are exactly that. So is repo scope vocabulary and prior commit style. You both landed on the same boundary from opposite directions, you through prompt iteration, him through benchmark autopsy.

The "You've hit your session limit" commit is the kind of artifact that teaches more than a tutorial. Tool edges show up as data when you pipe blindly.

Collapse
 
alipeter_407464af629f7122 profile image
Godwin peters •

True