DEV Community

#electronics

Posts

đź‘‹ Sign in for the ability to sort posts by relevant, latest, or top.
Your Gerbers Passed the Upload Check. Here's What It Didn't Look At.

Your Gerbers Passed the Upload Check. Here's What It Didn't Look At.

Comments
6 min read
Why I built a Raspberry Pi simulator

Why I built a Raspberry Pi simulator

Comments
2 min read
Bench Triage: How to Trace Shorted Motherboard Power Rails with a Multimeter

Bench Triage: How to Trace Shorted Motherboard Power Rails with a Multimeter

Comments
5 min read
Picking MOSFETs for Switching: Rds(on), Vgs and Gate Charge Explained

Picking MOSFETs for Switching: Rds(on), Vgs and Gate Charge Explained

Comments
2 min read
TVS Diodes for ESD and Surge Protection: The Basics

TVS Diodes for ESD and Surge Protection: The Basics

Comments
2 min read
How to Choose Aluminum Electrolytic Capacitors: Ripple Current, ESR and Lifetime

How to Choose Aluminum Electrolytic Capacitors: Ripple Current, ESR and Lifetime

Comments
2 min read
How to Verify Genuine IC Chips Before Bulk Ordering

How to Verify Genuine IC Chips Before Bulk Ordering

Comments
2 min read
How to pick the right wire gauge for a low voltage project

How to pick the right wire gauge for a low voltage project

Comments
3 min read
The Invisible Skeleton Inside Power Modules: Why Alumina Powder Decides Who Wins in Electronic Packaging

The Invisible Skeleton Inside Power Modules: Why Alumina Powder Decides Who Wins in Electronic Packaging

Comments
6 min read
KiCad vs EasyEDA vs Altium in 2026: Pick by the Job, Not the Hype

KiCad vs EasyEDA vs Altium in 2026: Pick by the Job, Not the Hype

Comments
3 min read
The wire gauge trap: why 18 AWG carries 16 A and your LED strip still browns out

The wire gauge trap: why 18 AWG carries 16 A and your LED strip still browns out

Comments 1
3 min read
Via-in-Pad: The Space Saver That Quietly Drains Your Solder Joints

Via-in-Pad: The Space Saver That Quietly Drains Your Solder Joints

Comments
3 min read
The Hardware Hacker's Guide to LED Polarity: Anode, Cathode, and How to Test Them đź’ˇ

The Hardware Hacker's Guide to LED Polarity: Anode, Cathode, and How to Test Them đź’ˇ

Comments
3 min read
AGND, DGND and Chassis Ground: The Three Grounding Questions Everyone Asks

AGND, DGND and Chassis Ground: The Three Grounding Questions Everyone Asks

Comments 1
3 min read
The Pinout Traps of Cheap Dev Boards

The Pinout Traps of Cheap Dev Boards

Comments 1
3 min read
đź‘‹ Sign in for the ability to sort posts by relevant, latest, or top.